I have been testing 2 different BSDs 4.4 as firewalls (one transparent bridge
and the other is just a firewall with routing) on identicial hardware. I
noticed one machine (the firewall with router) has been failing. I suspect
hardware but honestly after browsing the archives I am not sure what this may
be.
This is the error message that appears on the screen when it goes down:
uvm_fault(0xd9d69d38, 0x0, 0, 1) -> e
kernel: page fault trap, code = 0
stopped at skipjack_forwards+ox517: xorb 0 (%edi,%eax,1),%cl
ddb> uvm_fault(0xd081d340, 0xd0034000, 0, 1) -> e
kernel: page fault trap, code=0
Faulted in DDB; continuing...
ddb> uvm_fault(0xd081d340,0xd0034000, 0, 1) -> e
kernel: page fault trap, code=0
Faulted in DDB; continuing...
ddb> uvm_fault(0xd081d340, 0xd0034000, 0, 1) -> e
kernel: page fault trap, code=0
Faulted in DDB; continuing...
ddb>
Any ideas?
++++++++++++++++++++++++
# dmesg
ESB LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 At pci0 dev #1 function 2 "Intel 6300ESB SATA" rev 0x02: DMA( channel
0 aonfigured to coipathbility, channal 1 cknfigured to com`at)bili4y
atapiqcsi0 at pciide0 channel 0 drive0
scsib5s0 at atapiscsa : 2tarfets, initiator 7
cd0 at scsibes0 targ 0 lun 0: 8QSI, CD-ROM SCR(242, CHC8> ATAPI 5/cdrom
remova"le
cd0(pciide0:0:0): using PIO ,ode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 1:
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:1:1): using PIO mode 4, ULtra-DMA mode 5
ichiic0 at pci0 dev 31funcTion 3 "Ijtel 6300ESB SMBus" rev 0x02: irq 9\^Biic0
at ichiic0\^BadmCts0 atiic0 addr 0x2e
spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB rerisiKn 1*0
uhub1 at usb1 "Ijtel UHCI rood hub" rev 1.00/1.00 addr 1
qsb2 at uhci1: ESB revision 1.0
Uhub2 at esb2 "Intel UHCI root hQb" rev 1.0 /1.00 addr 1
isa0 atich`cib0
isadma0 at isa0
coe0 aT isa0 port 0x3f8/8 irq 4: ns165\^U0a, 16 byte fifo
pckbc0 at isa0popT 0x60/5
pck`d0 at pckbc0 (k"d slot)
pck"c0: using irq 1 forkbd slot
wskbd0at `ckbd0: consnle keyboard, using wsdisplay0
pbppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pbppi0
npx0 at i...@0 port 0xf0'16: reported by CPUID; using except)on 1\^V
fdc0 a4 iCa0 port 0x3f0/6 irq 6 drq 2
bioEask ffc5 netmasJ ffed ttxmask fbff
mtrr: PentiuE Pro MTRR suppoBt
uhideV0 at uhtb1 port 1 configuration 1 interbace 0 "Locipech USB Optical
MouSe" rev 2.00/43.01 addr 2
uhidev\^P: iclass 3/1
ums0 at uhidev0: 3buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 a4 u ub1 port 2 cgnfifuration 1 interface 0 "LITEON Technology USB
MulTimedia Keyboard" rev 1.10/\^Q.01 addr 3
uhid\^Ev1: iclass 3/1
ukbd0 at uhidev1: 8 modif)er key3, 6 key codes
wskbd1 at ukbd0 mqx 1
wskbd1: con ecting to w#dis0laY0
softraid0 !t root
root on Wd0a swap on wd0b d5m0 on wd0b
WARNIJG: /was not properly ulmounted
wskbd1: disaon.ecting from wsdhsplaY0
wskbd0 detached
ukBd0 de4ached
uhidev1 detached
wsmouSe0 ddtached
ums0 detached
uhidev0 detached
Data modified on freelist: word 1 of object 0xd29b99$0 size 0x4\^P pre\^Fious
tYpe UVM aDap (0xef4beecc != 0xefffeecc)
Data modified on Breelist: word 1of objebt 0xd29b94c size 0x38 previous type
UV\^A am`p (0xef4bee\^Cc != 0xefffee#c(
Data mOdified nn f2eelIst: word 1 Of object 0xd29b99c0 size 0x\^S8 previmus
type pcb (0xef4b%ecc != 0xefffeecc)
Data modified on freelist: word 0 of object 0xd2)b96c0 size 0x38 previous type
UFM amap (0xef4beEcc != 0xefffeac#)
Data modified on freelist: wo d 1 of o`ject 08d29b9500 size 0838 previous ty0a
UVM amap (0xef4beecc != 0xefff%ecc)
Data modifhed on freelist:woRd 1 of objec0 0xd29b90c0 sizd 0x28 previous 4ype
UVM amap (0pef4beecc != 0xefffeecc)
Data modified on fredli\^St: gmrd 1 o& object 0xd29b95$0 Rize 0x40 previo\^Es
type UVM amap (0xef4bdecc != 0xefffeecc)
Data modifie$ on fre%list: word 1 ofobject 0xd29b9040 size x40 pre6ious type
pcb \^H xef4bee#c != 0xdfffeecc)
Data m+dified on freedAst: word 1 of o"ject 0xd29b11c0 size 0x40 previEus type
temp (0hef4beecc != 0xedffeecc)
Data mo$ified on freelict: word 1 of obHecT 0xd29b9080 bize 0x40 previo1s Type
\^UVM amap (0xef4b%ecc != 0xefffeecc)
Data modified on freAlist: word 1 of object 0xd29b9a\^P0 size 0x40 prefious
ty0e UVM amap (0xef4beecc != 0xefffeecc)
D`ta modified on freelist: word 1 of object 0xd29b90c0 size 0x40 previous type
UVH amap (0xef$beebc != 0xefffeecc)
Data mldified on freel)st: uord 1 of object 0xd29b92c0 size 0x00 pRevious type
pcb 0xef4beecc != 0xeFffeecc)
\^Data modified on freelist: word 1 of object 0xd21b9040 s)ze 0x40 pRevious
ty0e UVM amap (0xef4beecc != 0xefffeecc)
Data modified on freelist: woRd 1 of object 0xd29b9a00 si:e 0x40 prevhnus 4ype
UVM am!p (0xef$beecc !- 0xefffeecc)
Data modified on freelist: word 1 of object 0xd29b96c0 size 0x38 ppevious type
UVM amap (0xef4beecc != 0xebffeecc)
Dat` modified o. freelist: word ! of obJect 0xd29b99c0 size 0x40 previgts type
pcb (0xef4beecc != 0xefffeecc)
Data modibied on freel)st: word 1 of object 0xd29"9080 sixe 0x40 prevhous type
UV\^M amap (0xef4beecc != 0xefff$ecc)
Data mndified /n freelist: wop` 1 of o"jec4 0xd29b91c0 size 0x40 previgus type
pcb (0xAf4beecc != 0xefffeecc)
Data mod fied on freelist: word 1 of object 0xd29b9280 shze 0x40 previoup type
pCb (0xef4be%cc != 0xefffaecc)
Dada modifIed kn freelist: word 1 of o"ject 0xd29b94c0 size 0x40 previous type
pcb (0xef4beecc != xefbfeecc)
Data modified on fre%lis4: w%rd 1 of object 0xd29b9500 size 0x40 previous type
UVM amap (0xef4beecc != 0xefffeecc)
OpenBSD 4.4 (GENERIC) #1021: Tue @ug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compIle/GENERIC
cpu0: Intel(R) Penthum(R) 4 CPU3.00GHz ("GenuineIntel" 686)cla\^Ss) 3.01 GHz
cpu0:
F\^PU,V(6,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,M\^TRR,PGE,\^MCA,CMOV,PAT,PSE36
,CFLUSH,DS,ACPI,MM\^X,FXSR,SSE,SSE2,\^SS,HTT,TM,SBF,SSE\^S,MWAIT\^LDS-C\^PL,C
NXT-ID,xTPR
real mem = 2146988032 (2047MB)
avail mem = 2067628032 (197!MB)
mailbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xf96b0 (58 entries)
bios0: vendor American Megatrends Inc. version "S20A3A04" date 04/03/2004
bios0: Quanta Computer Inc. S20A
apm0 at bios0: Powep Management spec V1.2
apm0: AC on, batterx charge un+nown
acpi at bhos0 function 0x0 not configured
pcibios0 at bios0: rEv 2.1 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table red 1.0 @ 0xf4630/\^Q60 (( eltries)
pcibios0: PCI Inderrupt Router at 00831:0 ("Intel 6300ESB LPC" rev 0x00)
pc)bios0: @CI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/081000 0xca000/0x1000
cpu0 at mainbuS0
pci0 at mailbus0 bu2 0: configuratio. mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Hos4" rev x02
ppb0 at pci0 Dev 3 function 0 "Intel 82855P CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci! dev 1 function 0"Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
`Ddress 00:c0:9f:3e:f5:bf
ppb1 ad pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 0
uh#i0 at `ci0 $ev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
uhbi1 at pci0 dev 29 function 1 "Intel 630\^PESB USB" rev 0x02: irq 11
"Inte, 6300ESB WDT" rev 0x02 at pci0 dev 29 funct)on \^P not configured
"Intel 6300ESB APIC" rev 0x02 aP pci0 dev 29 function 5 nod configubed
dhci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 10
ehci0: timed gut waIting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hu`" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 " ntel 82...@a Hub-to-PCI" rev 0x0a
pci3 `t ppb2 bus 3
em1 at pci3 dev 2 dunction 0 "IntEl PRO/1000MT (82541GI)" rev 0x00: irq 3,
address 00:c0:9f:3e:f5:c0
fga1 at pci3 dev 14 f5nction 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdipplay0: screen 1-5 added (80x25, vt100 emulation)
drm aT vga1 unsupported
ichpcib0 aT pci0 dEv 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit tiidr
at 3571545Hz
pciide0 at pci0 dev 31 func4ion 2 "Intel 6300ESB SATA" 2ev 0x02: DMA, channel
0 configured to compat)bility, channe, 1 aonfigured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: \^R targets, initiator 7
cD0 ap scsibes0 targ 0 lun 0: ATAPI 5/cdrom ramovable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 1:
wd0: 16-sector PIO, LBA48, 11\^T473MB, 2344\^T1648sectors
wd0(pciide0:1:1): usifg PIO mode 4$ Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Inteh 6300ESB SHBus" rev 0x02: irq 9
ii#0 at ic(iic0
admcts0 atiic0 addr 0x2e
spdmem0 at iic0 `ddr 0x5": 1\^GB DDR SDRAM non-parity PC3200CL\^S.0
spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
Uhub1 atusb1 "Intel UHAI root huB" rav 1.00/1.00 addr 1
usb0 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at ira0 port 0x3f8/0 irq 4: fs16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pck`d0 at pckbc0 (kbd 3lot)
pckbc\^P: using )rq 1 for kbd slot
wSkbd at pckbd0: console keyboard, uqing wsdisplay0
pcppi0 ad isa0 port 0x61
midi0 at pcppi08
spkr0 at pcppi
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at )sa0 pGrT 0x1f0/6 irq 6 drq 2
biomask ffc5 netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
rgot on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmNunted
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GEN\^ERIC
cpu0: Intel(R) Penthum(R) 4 CPU 3.00GHz ("GanuineIndel" 686-class) #.01 GHz
cpu :
f...@u,V86,DE,PSE,T\^SC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,AMOV,PAT,PSE36,AFL
USH,DS ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real me, = 2146988032 (2043MB)
avail mem = 2067628032 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32 rev. 0 @ 0xf0010,
SMBIOS ref. 2.3 @ 0xf96b0 (58 ent2ies)
bios0: vendor American Megatrends Inc. version "S2 A3A04" date 04/13-2004
bios0: Qeanta Computer Inc. S20A
apm0 at bios0: Power Ma.`gement spec V1.2
apm0: AC on, battery charge unknown
acpi at bio30 function 0x0 not configqred
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibioq0: PCI IRQ Routing Table re6 1.0 @ 0xf4630/160 (8 entries)
`cibios08 PCI In4errupt Routeb at 000:31:0 ("Intel 6100ESB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
b)os0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x0000 0xca000/0x1000
cpu0 at mainbus0
pci at maiNbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Inted 82875P Host" rev 0x02
ppb0 at `ci0 dev 3 function 0 "Iftel 82871P CSA" rev 0x02
pci1 `t ppb0 bus 1
em0 at pci1 dev 1 fUnction 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
address 00:c0:9f:3e:f5:bf
ppb1 at pci0 dEv 28 function 0 "Intel 6100ESB PCIX" rev 0x02
pci2 aT ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
uhci1 at pci0 d%v 29 function 1 "Intel 6300ES@ USB" rev 0x02: irq 11
"Inteh 6300ESB WDT" rev 0x02 at pci0 Dev 29 function 4 not conficured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not conFigured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: ibq 10
ehci0: timed out waiting for BIOR
usb0 at ehci0: USB revisikn 2.0
uhub0 at usb0 "Intel EHCI root hub"rev 2*00/1.00 addr 1
0pb2 at pci0 dev 30 function 0 " ntel 82(01BA Hub-to-PCI" rev 0x0a
pci3 `t ppb2 "us 3
em1 at pci\^S dev 2 function 0 "Iftel PRO/1000MT (82041GI)" rev 0x00\^X irq 3,
address 00:c0:9d:3e:f5:c0
vga1 at pci3 dev 14 function 0 "A\^TI Rage XL" pev 0x27
wsdisplay0 at vba\^Q mux 08 consO,e (80x25, vt100 emulation)
wsdi3play0: screen 1-5 added (80x25, vd100 emulation)
drm at vga1 unsupported
ichpcib0 at pci0 dev 31 fu.ctikn 0 "Intel 6300DSB LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 functiOn 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel
0 configured to compatibilIty, channel 1 configured to coepatibility
atapiscsi0 a4 pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initi!tor 7
cd0 at scsibus0 targ 0 lun 0: a...@i 5'cdrom removable
cd0(pciide0:0:0(: using PIO mode 4, Ultra-DMA mode2
wd0 at pciide0 c`annel 1 drive 1:
wd0: 16-sector PIO, LBA48, 114473MB, 2\^S444164\^X sectors
wd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci dev 31 function 3 "Intel 6300ESB SMBus" ref 0x02: irq \^Y
iic0 a4 ichiic0
admc4s0 at iic0 addr 0x2e
spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
rpdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL1.0
usb1 !t uhci0: USB revision 1.0
ehub1 at usb1 "Intel UHCI root hub" rev 1.00-1.00 ad$r 1
usb2 at uhci1: USB pevision 1.0
uhub2 at usb2 "Inte, UHCI rkot hub" rev 1.00/1.00 aDdr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at iSa0 pgrt 0x3f8/8 irq 4: &s16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 !t pckbc0 (kbd slot)
pckbc0: using irq 1 dor kbd slot
wrkbd0 at pckbd0: conqole keyboard, using wsdisplay0
pcppi0 aT isa0 port0x61
midi0 at pcppi0:
spkr0 at pcppi0
npx0 ad isa0port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
binmask ffc5 netmask ffed ttymask ffff
mtrr: PentiUm Pbo M\^TRR sUpport
softraid0 at root
roOt on wd0a swap on wd0b dumP on wd0b
WARNING: / was lot properli unmounted
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 2146988032 (2047MB)
avail mem = 2067628032 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/13/04, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf96b0 (58 entries)
bios0: vendor American Megatrends Inc. version "S20A3A04" date 04/13/2004
bios0: Quanta Computer Inc. S20A
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4630/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xca000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: irq 5,
address 00:c0:9f:3e:f5:bf
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: irq 11
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 10
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci3 at ppb2 bus 3
em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 3,
address 00:c0:9f:3e:f5:c0
vga1 at pci3 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide0 channel 1 drive 1:
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: irq 9
iic0 at ichiic0
admcts0 at iic0 addr 0x2e
spdmem0 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffc5 netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
#
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/196390709/direct/01/
