Hello,
I'm having some issues connecting to 802.11g wireless networks with a
somewhat recent snapshot. I've got a linksys WAP54G access point v2,
running firmware release 2.08. With the access point completely open
(ssid broadcast, no mac filters), OpenBSD will only connect to it in
802.11b mode. When I place the access point in 802.11g only mode or
ifconfig my ath with mode 802.11g I get "no network". After searching a
bit I've seen others who have the same problem, but I didn't find a
dmesg to find out on what hardware or release they were running.
Issues that might be related is that I'm seeing a lot of HAL resets when
I run kismet. In 3.7 release I didn't get 802.11b to work either, but
that seems to have been worked out.
Any clues on this?
// nick
Here's the ifconfig & dmesg:
ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu
1500
lladdr 00:0d:54:98:d9:70
groups: egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: nwid whynot chan 11 bssid 00:0f:66:11:09:39
inet 192.168.240.3 netmask 0xfffffff8 broadcast 192.168.240.7
inet6 fe80::20d:54ff:fe98:d970%ath0 prefixlen 64 scopeid 0x5
OpenBSD 3.7-current (GENERIC) #0: Sat Aug 6 12:48:03 CEST 2005
[EMAIL PROTECTED]:/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 699 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
real mem = 133709824 (130576K)
avail mem = 115425280 (112720K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/02/02, BIOS32 rev. 0 @
0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 7:58 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbc20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage 128 Mobility MF" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
pci2 at ppb1 bus 2
esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev
0x00: irq 10
cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev
0x00: irq 10
"Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15 function 2
not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-210>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efcd netmask efcd ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ath0 at cardbus0 dev 0 function 0 "3Com Corp., 3CRPAG175 Wireless LAN PC
Card, ": irq 10
ath0: AR5212 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address
00:0d:54:98:d9:70
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass
3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0: at uhub0 port 1 (addr 2) disconnected
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass
3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse1 at ums0 mux 0
