On Sat, 22 Jan 2011, Joel Rees wrote:
On Sat, 15 Jan 2011 14:55:35 -0600
Gable Barber <gablebar...@gmail.com> wrote:
On Sat, Jan 15, 2011 at 2:47 PM, Sergiu Partenie <pser...@gmail.com> wrote:
On 15.01.2011, at 22:28, Gable Barber wrote:
Fresh install, used entire disk for OpenBSD, and automatic
partitioning layout.
I know entire disk works with intel Macs, and I remember that
there was some discussion of entire partition working on PPC
Macs back when Apple went pure insane. But does entire disk
work with all PPC Macs?
If so, what does one do instead of ofwboot, since there is no
PCBIOS and the 4-DOS-partition paradigm doesn't hold?
And, which machines does entire partition work on?
Here is the dmesg from a macmini g4 ppc, working just fine since quite
some years. Just follow the instructions from the manual pages to install:
[ using 454796 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A]console in [] , no keyboard attached,
trying usb anyway
using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, :
consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000:
width 640 linebytes 768 height 480 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.8 (GENERIC) #95: Mon Aug 16 09:13:15 MDT 2010
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1032704000 (984MB)
mainbus0 at root: model PowerMac10,1
cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9 irq 47
pgs0 at macgpio0 offset 0x11: irq 55
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq 0,
version 1.0, legacy support
ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29,
version 1.0, legacy support
ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM160HC>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
atapiscsi0 at wdc1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> ATAPI
5/cdrom removable
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not
configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41,
address 00:0d:93:5e:38:10
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital My
Book" rev 2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <WD, 10EAVS External, 1.75> SCSI2 0/direct
fixed
sd0: 953869MB, 512 bytes/sec, 1953525168 sec total
softraid0 at root
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b
I did NOT move ofwboot to the boot partition with
OSX, I didn't read that part of the install notes until after I
installed. I moved ofwboot by booting off cd, mounting wd0, and moving
it manually from the cd.
Did you do that from Mac OS or from openbsd?
ofwboot should be on a HFS / HFS+ ("Mac OS Extended"/"Mac OS Extended
(Journaled)" in Disk Utility) partition, preferably the 1st one on the boot disk. Have you
copied ofwboot to the HFS partition or in the OpenBSD / ?
I moved it to wd0a, assuming this was the correct partition. Is it not?
What format is wd0a? HFS+? or openbsd's native format? (What was it, now, I
wish I weren't losing my memory.)
Anyway, I'm thinking that wd0a is probably not a place you'll be able to talk
the open firmward boot ROM into reading ofwboot from. Especially if you used
the default partitioning scheme.
--
Joel Rees <joel_r...@sannet.ne.jp>
