Not to belabor this thread too much more, but if you peruse the
openchrome-users mailing list for a bit, you will see that these
boards are developing a reputation for hard lockups under linux, so it
is not just me. The developing consesnus over there is that the only
way to prevent lockups is to d
Or missing interrupts...
On Mon, Jan 29, 2007 at 04:29:52PM +0100, Dimitry Andric wrote:
> Mark Zimmerman wrote:
> > You will notice the sucky DMA of the Jetway board in all of them.
> ...
> > wd0a: aborted command, interface CRC error reading fsbn 671456 of 671456-0
> > (wd0 bn 5571281; cn 5527
Mark Zimmerman wrote:
> You will notice the sucky DMA of the Jetway board in all of them.
...
> wd0a: aborted command, interface CRC error reading fsbn 671456 of 671456-0
> (wd0 bn 5571281; cn 5527 tn 1 sn 2), retrying
> wd0: transfer error, downgrading to Ultra-DMA mode 4
> wd0(pciide1:0:0): usi
Mark Zimmerman wrote:
> I almost didn't submit this because there were no outright failures, but
> then I noticed that with acpi enabled, the hw.setperf sysctl is missing.
> Without acpi, it is present and works properly.
This is because the "traditional" EST mechanism is currently disabled
when A
You're not getting hw.setperf with ACPI enabled because ACPI and APM don't and
shouldn't coexist. ACPI has a hw.setperf mechanism, but you don't have it
enabled in your kernel (I don't know if it's working yet.)
Travers Buda
On Sun, 28 Jan 2007 19:15:13 -0700
Mark Zimmerman <[EMAIL PROTECTED]>
> On Sun, 28 Jan 2007 15:52:08 -0700
> Mark Zimmerman <[EMAIL PROTECTED]> wrote:
>
> > Greetings:
> >
> > I almost didn't submit this because there were no outright failures, but
> > then I noticed that with acpi enabled, the hw.setperf sysctl is missing.
> > Without acpi, it is present and works
Mark,
This is why:
$ grep cpu /usr/src/sys/arch/i386/conf/GENERIC
cpu0at mainbus?
#acpicpu* at acpi?
The acpicpu driver provides support for extracting processor power and
performance levels from ACPI tables. This information can be used to
throttle processor speed to redu
Greetings:
I almost didn't submit this because there were no outright failures, but
then I noticed that with acpi enabled, the hw.setperf sysctl is missing.
Without acpi, it is present and works properly. Anyhow, here are the
four dmesgs in case they are illuminating.
You will notice the sucky DM
8 matches
Mail list logo
