Hi, I recently installed 3.7 release on a Toshiba portege 610CT laptop
and the kernel panics while initializing my aironet wireless card.
If I do a 'boot -c' and 'disable an' from the UKC> prompt all works as
expected. I tried booting with the card in both slots, and also without the
other pcmcia card (a xircom card) with the same results. I was previously
running linux (2.4.27 kernel) on the machine and the card worked correctly
there.
dmesg and trace output from serial console on a failed run are below:
boot> boot
booting hd0a:/bsd: 4686240+945680 [52+241328+223324]=0x5d0864
entry point at 0x100120
[ using 465076 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 90 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
cpu0: F00F bug workaround installed
real mem = 24944640 (24360K)
avail mem = 14766080 (14420K)
using 330 buffers containing 1351680 bytes (1320K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(06) BIOS, date 07/03/95
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 2:36 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe0000/0x10000
cpu0 at mainbus0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK2105MAV>
wd0: 16-sector PIO, LBA, 2067MB, 4233600 sectors
wd0(wdc0:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
an0 at pcmcia0 function 0 "Cisco Systems, 340 Series Wireless LAN Adapter", irq
3kernel: protection fault trap, code=0
Stopped at Xprot: pushl $0x4
ddb> trace
Xprot(d015ebe0,8,10246,d0563264,d07b8014) at Xprot
curpcb(d07b8000,d07b8000,d06d36f0,0,0) at 0x703
config_attach(d07ac200,d055dc20,d06d36f0,d0472148) at config_attach+0xef
pcmcia_card_attach(d07ac200,d07ac200,0,d07b2480,0) at pcmcia_card_attach+0xf4
pcic_attach_card(d07b2480,1,0,d07b2480) at pcic_attach_card+0x1c
pcic_init_socket(d07b2480,d055ef40,d06d3770,d046b8a8) at pcic_init_socket+0x85
pcic_attach_socket(d07b2480,d07b2400,d06d37f8,d046c7c8) at pcic_attach_socket+0
x7d
pcic_attach_sockets(d07b2400,d07b2400,d06d37d8,d0214e71,d06d3850) at pcic_attac
h_sockets+0x3b
pcic_isa_attach(d078db00,d07b2400,d06d3850,0,100) at pcic_isa_attach+0xf1
config_attach(d078db00,d07b2400,d06d3850,d040af60,0) at config_attach+0xef
isascan(d078db00,d07b2400,4,1) at isascan+0x14e
config_scan(d040b068,d078db00,d06d3eb0,0,d056c4f8) at config_scan+0xaf
config_attach(d0794fc0,d055e034,d06d3eb0,d03537f4) at config_attach+0xef
mainbus_attach(0,d0794fc0,0,0,d06d3f10) at mainbus_attach+0xf5
config_attach(0,d055cf78,0,0,d05b2260) at config_attach+0xef
config_rootfound(d04fb4f4,0,d06d3f58,d032c068) at config_rootfound+0x27
cpu_configure(0,1,3,0,1830000) at cpu_configure+0x1f
main(0,0,0,0,0) at main+0x339
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80204 swapper
ddb> show registers
ds 0x10
es 0x10
fs 0x58
gs 0
edi 0xd07b8000 end+0x158f30
esi 0xd07b8000 end+0x158f30
ebp 0xd06d3688 end+0x745b8
ebx 0x400
edx 0x434
ecx 0
eax 0xffffffff APTD+0xfff
eip 0xd0100da0 Xprot
cs 0x8
eflags 0x10246
esp 0xd06d3660 end+0x74590
ss 0xd06d0010 end+0x70f40
Xprot: pushl $0x4
ddb> boot dump
rebooting...
the dmesg from a sucessful boot is here:
boot> boot -c
booting hd0a:/bsd: 4686240+945680 [52+241328+223324]=0x5d0864
entry point at 0x100120
[ using 465076 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 90 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
cpu0: F00F bug workaround installed
real mem = 24944640 (24360K)
avail mem = 14766080 (14420K)
using 330 buffers containing 1351680 bytes (1320K) of memory
User Kernel Config
UKC> disable an
126 an* disabled
127 an* disabled
128 an* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(06) BIOS, date 07/03/95
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 2:36 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe0000/0x10000
cpu0 at mainbus0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK2105MAV>
wd0: 16-sector PIO, LBA, 2067MB, 4233600 sectors
wd0(wdc0:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
"Cisco Systems, 340 Series Wireless LAN Adapter" (manufacturer 0x15f,
product 0x7) at pcmcia0 function 0 not configured
pcmcia1 at pcic0 controller 0 socket 1
pccom3 at pcmcia1 function 0 "Xircom, CreditCard Ethernet+Modem 28.8,
CEM28" port 0x2f8/8, irq 3: ns16450, no fifo
pcic0: irq 9, polling enabled
biomask ed45 netmask ed45 ttymask ffcf
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 3028 files, 13819 used, 36268 free (100 frags, 4521
blocks, 0.2% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
/dev/rwd0h: 1 files, 1 used, 398182 free (14 frags, 49771 blocks, 0.0%
fragmentation)
/dev/rwd0h: MARKING FILE SYSTEM CLEAN
/dev/rwd0d: 3 files, 3 used, 40400 free (16 frags, 5048 blocks, 0.0%
fragmentation)
/dev/rwd0d: MARKING FILE SYSTEM CLEAN
/dev/rwd0g: 19735 files, 165208 used, 186607 free (1783 frags, 23103
blocks, 0.5% fragmentation)
/dev/rwd0g: MARKING FILE SYSTEM CLEAN
/dev/rwd0e: 713 files, 3498 used, 46833 free (17 frags, 5852 blocks,
0.0% fragmentation)
/dev/rwd0e: MARKING FILE SYSTEM CLEAN
setting tty flags
machdep.allowaperture: 0 -> 2
starting network
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
display.vblank -> on
display.screen_off -> 600000
display.msact -> off
display.kbdact -> on
display.outact -> on
starting local daemons:.
standard daemons: cron.
Tue May 31 19:41:13 CDT 2005
--
Hardware, n.:
The parts of a computer system that can be kicked.
