Re: PPPoE disconnecting frequently

At this point I’m considering leasing a routable public IP address or a block of addresses for the ZyXEL In this way the ATM/PTM traffic & PPPoE encapsulation is telco/ISP specific & an OpenBSD device can be assigned an ethernet port & public IP if needed Regards Patrick > On Mar 19, 2017, at

Re: PPPoE disconnecting frequently

Hi, Another thing to check is whether the PPPoE tunnel is trying to negotiate IPv6. I had this happen with my ISP. I was disconnecting every 5-6 minutes. I ended up changing my hostname.pppoe0 to: inet 0.0.0.0 255.255.255.255 NONE \ pppoedev re0 authproto chap \ authname 'u...@example.com' up

Re: PPPoE disconnecting frequently

I’ve also been troubleshooting frequent PPPoE issues with an OpenBSD router at this point my troubleshooting has resulted in the following: The residential ISP supplied ZyXEL C100Z currently supports forty five days plus of PPPoE uptime It appears the C100Z PTM (Packet Transfer Mode) traffic is

Re: PPPoE disconnecting frequently

On 2017-03-17, Nicholas Bachmann wrote: > Hi all, > > I’m having a problem where PPPoE disconnects every 6-7 minutes. I’m > originally saw this in 5.9; I then upgraded to 6.0 but still have the > same issue. > > If I run “ifconfig pppoe0 up” right after it disconnects, it

PPPoE disconnecting frequently

Hi all, I’m having a problem where PPPoE disconnects every 6-7 minutes. I’m originally saw this in 5.9; I then upgraded to 6.0 but still have the same issue. If I run “ifconfig pppoe0 up” right after it disconnects, it comes right back up again. I have a ddwrt box that can successfully keep this