I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages. But I am not sure which
/dev/device to use in minicom to access the switch. I can see there
is no /dev/uplcom0 or
/dev/ttyU0
On 2008/02/02 20:53, Chris wrote:
I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages. But I am not sure which
/dev/device to use in minicom to access the
2008/2/2, Chris [EMAIL PROTECTED]:
I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages. But I am not sure which
/dev/device to use in minicom to access the switch. I
Chris wrote:
I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages. But I am not sure which
/dev/device to use in minicom to access the switch. I can see there
is no
Stuart Henderson wrote:
/dev/ttyU0
you should use /dev/cuaU0 for dial-out.
On 2008/02/02 20:53, Chris wrote:
I am trying to a access a switch connected to a USB-Serial controller
to my laptop's USB port. When I plug in the USB port to my laptop I
get the following in my /var/log/messages.
On Feb 2, 2008 10:29 PM, Marc Balmer [EMAIL PROTECTED] wrote:
/dev/ttyU0
you should use /dev/cuaU0 for dial-out.
Thanks. I tried both /dev/ttyU0 and /dev/cuaU0 in minicom. They both
seem to go to the initializing modem phase but when I turn on the
switch with /dev/cuaU0 configuration, minicom
A) don't bother initializing a modem. Forget minicom. It's nearly
useless for what you're doing.
B) openbsd has a utility built in to do just these kinds of things:
cu(1)
C) to use cu(1) with a USB serial: cu -l /dev/cuaU0
On Feb 2, 2008, at 1:57 PM, Chris wrote:
On Feb 2, 2008 10:29
On Sun 2008.02.03 at 08:57 +1100, Chris wrote:
On Feb 2, 2008 10:29 PM, Marc Balmer [EMAIL PROTECTED] wrote:
/dev/ttyU0
you should use /dev/cuaU0 for dial-out.
Thanks. I tried both /dev/ttyU0 and /dev/cuaU0 in minicom. They both
seem to go to the initializing modem phase but when I turn
On Feb 3, 2008 9:27 AM, johan beisser [EMAIL PROTECTED] wrote:
C) to use cu(1) with a USB serial: cu -l /dev/cuaU0
I tried cu -l /dev/cuaU0, cu -l /dev/cuaU0 -s 9600 - it says
Connected after that nothing happens. Should I try changing the baud
rate? This Cisco 3950 switch is usually connected
On Feb 2, 2008, at 3:17 PM, Chris wrote:
On Feb 3, 2008 9:27 AM, johan beisser [EMAIL PROTECTED] wrote:
C) to use cu(1) with a USB serial: cu -l /dev/cuaU0
I tried cu -l /dev/cuaU0, cu -l /dev/cuaU0 -s 9600 - it says
Connected after that nothing happens. Should I try changing the baud
rate?
On Feb 3, 2008 10:22 AM, johan beisser [EMAIL PROTECTED] wrote:
You may hit space or enter.
I did but looks like it just hangs in there - jammed. Nothing happens.
Sometimes it just has to wake up. Cisco,
by default, uses 9600 8,N,1 if i remember correctly.
Yes. You are right.
Is there any
On Sun 2008.02.03 at 10:28 +1100, Chris wrote:
On Feb 3, 2008 10:22 AM, johan beisser [EMAIL PROTECTED] wrote:
You may hit space or enter.
I did but looks like it just hangs in there - jammed. Nothing happens.
Sometimes it just has to wake up. Cisco,
by default, uses 9600 8,N,1 if i
12 matches
Mail list logo
