Hello,
I run OBSD from snapshot install (OpenBSD 4.4-beta (GENERIC) #976: Fri
Jul 11 16:41:38 MDT 2008) and recently I've run in some troubles with X
server. I think some clever eye can spot the problem and give me a hint.
One time after using gmplayer I've closed X session but the shell prompt
refused to appear ( I run X from command line, so normally after X exit
I get the shell prompt). After 10 or so second, I just pressed the
Ctrl+Alt+Del for a clean shutdown with power down too.
After this incident, next times when I tried to start X a freeze was
there, just some Xauth messages were visible. I did some research and I
figured out that X was able to start after two Ctrl+C succesively. Then,
at X exit I was able to get the shell promt after one Ctrl+C.
I tried to look in startx script and I identified xinit as a start
command. When I tried this alone, the X was started instantly. The exit
was also clean. I repeated this over and over, the behaviour was the
same. Next day all this was gone, with X starting at startx normally. In
all this time, from the install I never installed or removed packages
nor updating or configuring something. Just using apps like firefox,
gmplayer, pidgin, etc.
If you think you can see the issue, please give me a hint just to be
able to solve an X file . Down here is my dmesg (remove it on reply,
please):
OpenBSD 4.4-beta (GENERIC) #976: Fri Jul 11 16:41:38 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1071783936 (1022MB)
avail mem = 1028149248 (980MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/07/06, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf0450 (72 entries)
bios0: vendor Dell Inc. version "A08" date 07/07/2006
bios0: Dell Inc. Precision WorkStation 370
apm0 at bios0: Power Management spec V1.2
apm0: APM get power status: unknown error code? (83)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeb00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800! 0xcc800/0x3800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82925X Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x04: irq 11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI FireGL V3100" rev 0x80
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI FireGL V3100 Sec" rev 0x80 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): irq 11, address 00:11:11:e3:85:c4
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: irq 10
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 9
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 3
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 4
emu0 at pci4 dev 2 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 3
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci4 dev 2 function 1
not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400BD-75JMA0>
wd0: 16-sector PIO, LBA, 38146MB, 78125000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <ASUS, DRW-1608P3S, 1.24> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-3200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask e76d netmask ef6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
