Hi Two (unrelated) problems with the axe device:
1. Is altq/pf not implemented for USB-Ethernet devices like axe0 ? I can't get the axe0 device to work with queuing rules of pf: Device according to dmesg (full dmesg see end of email): axe0 at uhub0 port 1 configuration 1 interface 0 axe0: Cisco-Linksys USB200M v2, rev 2.00/0.01, addr 2, AX88772, address 00:10:60:06:5e:4d ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0001 pf.conf part which makes the device unsuable (no packet will flow through anymore) # variable substitutions internal=axe0 external=gem0 local_net = "192.168.100.0/23" voip_ports = "{ 5060, 5061 , 9999 >< 20001 }" voip_tcp = "{ 5060 5061 }" voip_server = "{ xxx.yyy.200.79 xxx.yyy.200.80 xxx.yyy.200.81 xxx.yyy.200.148 }" altq on $internal cbq bandwidth 3Mb queue { std_in, voip_in, dns_in } queue std_in bandwidth 2.6Mb cbq(default) queue voip_in bandwidth 220Kb priority 4 queue dns_in bandwidth 120Kb priority 5 pass out on $internal proto { tcp udp } from any port domain to $local_net queue dns_in pass out on $internal proto tcp from any port $voip_tcp to $local_net queue(std_in, voip_in) pass out on $internal proto udp from any port $voip_ports to $local_net queue voip_in pass out on $internal proto udp from $voip_server to $local_net port 9999 >< 20001 queue voip_in queuing on the gem0 device works fine (rules ommited here) The same pf.conf was actice and nicely working on a different (meanwhile dead ) machine with rl0 and rl1 IFs 2. after some time the axe0 device gets into a error state (as if detached, but it isn't): axe0: usb errors on rx: IOERROR axe0: usb errors on rx: IOERROR axe0: at uhub0 port 1 (addr 2) disconnected ukphy0 detached axe0 detached axe0 at uhub0 port 1 configuration 1 interface 0 axe0: Cisco-Linksys USB200M v2, rev 2.00/0.01, addr 2, AX88772, address 00:10:60:06:5e:4d ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0001 What could cause this? (detaching it by hand doesn't invole the IOERROR message...) Greetings & thanks cmb complete dmesg, kernel compiled by me, as all generic kernel since 3.3 hang on the (non-existant) second USB1.1 device OpenBSD 4.0 (GENERIC.new) #0: Fri Nov 17 01:52:41 CET 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/macppc/compile/GENERIC.new real mem = 167772160 (163840K) avail mem = 142712832 (139368K) using 1254 buffers containing 8388608 bytes (8192K) of memory mainbus0 (root): model PowerBook2,1 cpu0 at mainbus0: 750 (Revision 0x8300): 299 MHz: 512KB backside cache memc0 at mainbus0: uni-n ki2c0 at memc0 offset 0xf8001000: cannot get i2c-rate mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "ATI Mach64 LN" rev 0x64, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00 macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x02 openpic0 at macobio0 offset 0x40000: version 0x4614 macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 irq 47 "programmer-switch" at macgpio0 not configured "extint-gpio12" at macgpio0 not configured daca0 at macobio0 offset 0x10000: irq 30,1,2 "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,50 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 3 targets akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons apm0 at adb0: battery flags 0x5, 100% charged "battery" at macobio0 offset 0x0 not configured "backlight" at macobio0 offset 0xf300 not configured ki2c1 at macobio0 offset 0x18000 iic0 at ki2c1 wdc0 at macobio0 offset 0x1f000 irq 19: DMA wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK3211MAT> wd0: 16-sector PIO, LBA, 3102MB, 6354432 sectors wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 wdc1 at macobio0 offset 0x20000 irq 20: DMA atapiscsi0 at wdc1 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-ROM CR-175, 5AAE> SCSI0 5/cdrom removable cd0(wdc1:0:0): using BIOS timings, DMA mode 2 wdc2 at macobio0 offset 0x21000 irq 21: DMA audio0 at daca0 ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Apple USB" rev 0x00 at pci1 dev 25 function 0 not configured mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00 gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x00: irq 41, address 00:0a:27:8d:9a:e8 bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2 axe0 at uhub0 port 1 configuration 1 interface 0 axe0: Cisco-Linksys USB200M v2, rev 2.00/0.01, addr 2, AX88772, address 00:10:60:06:5e:4d ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0001 bootpath: '/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/bsd' boot device: wd0. root on wd0a rootdev=0x0 rrootdev=0xb00 rawdev=0xb02 axe0: usb errors on rx: IOERROR axe0: usb errors on rx: IOERROR axe0: at uhub0 port 1 (addr 2) disconnected ukphy0 detached axe0 detached axe0 at uhub0 port 1 configuration 1 interface 0 axe0: Cisco-Linksys USB200M v2, rev 2.00/0.01, addr 2, AX88772, address 00:10:60:06:5e:4d ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0001