I'm back with some interesting info :-).
By disabling each acpi module, I've discovered that the problem disappeared
when I disable "acpiprt" in UKC.
Based on the manpage, this module maps the PCI ...
So, I've disabled each PCI.
interrupts are gone when I disable "ichiic" in UKC :-) .
(When
Hello,
I've remarked that the speakers of the laptop are doing a small noise when
I do not listen music.
If I mute the speaker (mixerctl outputs.master.mute) this little noise
disappear.
I thought this was an Hardware issue. So, I've re-installed the orignial
disk I've received with the machine
Hello Philip,
After few minutes up, the vmstat result are the following:
both executed within few seconds interval.
vmstat -i
interrupt total rate
irq0/clock 48183 388
irq0/ipi 1971
irq144/acpi0
On Thu, Mar 1, 2018 at 12:37 AM, vincent delft
wrote:
> If I do a “boot –c” and “disable acpimadt” the machine does no more do lot
> of interrupts.
>
> But I miss lot of hardwares (2 cpu instead of 4, no mouse, …)
>
>
>
> Otherwise, I’ve tried to remove lot of CPU
Hello,
If I do a “boot –c” and “disable acpimadt” the machine does no more do lot
of interrupts.
But I miss lot of hardwares (2 cpu instead of 4, no mouse, …)
Otherwise, I’ve tried to remove lot of CPU performance parameters in the
Bios settings, but this has no effects.
I’ve tried to
Hello,
I've just installed current on my new dell e5450, but encounter some
troubles.
1 of the 4 display CPU in Top is heating 50% for interrupts.
Concerning the installation process I did, I just followed the normal
process by booting bsd.rd and performing a standard install by getting
files
6 matches
Mail list logo