Hi,
Data modified on freelist: word 0 of object 0xffff800001d9dc00 size 0x40
previous type ??? (invalid addr 0x21004e00770d0011)
Data modified on freelist: word 0 of object 0xffff800001d9dc00 size 0x40
previous type ??? (0x547bec00 != 0xdeadbeef)
The messages come from /sys/kern/kern_malloc.c, function malloc(), line 258,
Here the /var/run/dmesg.boot (edit of MAC addresses):
OpenBSD 3.9 (GENERIC) #462: Thu Mar 2 03:52:16 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073278976 (1048124K)
avail mem = 908550144 (887256K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2210.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
iic1 at nviic0
"unknown" at iic1 addr 0x2f not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq 10,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 11, address
XX:XX:XX:XX:XX:XX
eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 250 AC97" rev 0xa1: irq 11,
nForce3 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-716A, 1.03> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
pciide1 at pci0 dev 9 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD160JJ>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide2: using irq 5 for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9550" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9550 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
wi0 at pci2 dev 6 function 0 "Eumitcom WL11000P" rev 0x02: irq 3
wi0: "Lucent Technologies, WaveLAN/IEEE, Version 01.01"
wi0: Firmware 6.06 variant 1, address XX:XX:XX:XX:XX:XX
xl0 at pci2 dev 7 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 11, address
XX:XX:XX:XX:XX:XX
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
rl0 at pci2 dev 8 function 0 "Realtek 8139" rev 0x10: irq 5, address
XX:XX:XX:XX:XX:XX
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci2 dev 9 function 0 "Realtek 8139" rev 0x10: irq 10, address
XX:XX:XX:XX:XX:XX
rlphy1 at rl1 phy 0: RTL internal PHY
ahc0 at pci2 dev 10 function 0 "Adaptec AHA-19160B U160" rev 0x02: irq 11
scsibus1 at ahc0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST39236LW, 0005> SCSI3 0/direct fixed
sd0: 8761MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sec, 17942584 sec total
"VIA VT6306 FireWire" rev 0x46 at pci2 dev 12 function 0 not configured
re0 at pci2 dev 13 function 0 "Realtek 8169" rev 0x10: irq 3, address
XX:XX:XX:XX:XX:XX
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhub3 at uhub0 port 2
uhub3: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 3
uhub3: 3 ports with 2 removable, bus powered
uhidev1 at uhub3 port 1 configuration 1 interface 0
uhidev1: ALCOR macally Kbd Hub, rev 1.10/1.00, addr 4, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x81
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x1f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
pppoe0: phase establish
Any hints guesses as to what those could mean? I am running pf on the
Internet side but it does pass traffic on the wifi side. There are no
other kernel messages other than the pppoe message indicating that a
connection is established.
Thanks,
-peter
