Hello,
Thank you for the reply and information.
I have also tried to use scsi controller on the VM with the same result. See
below the dmesg and VM configuration.
Also, since I do have access to the xen host, I have looked at the logs
under /var/log/xen and I found the following errors:
==>
I have no idea what is causing your backend timeout, but your VM
config would be useful information, and take a look at xend.log etc.
on the host for any related errors (if you have access to it). I'm
running OpenBSD 6.4 just fine under Xen; however my Dom0 is only 4.4.4
(dmesg attached).
Note
Hello there,
Has anybody successfully run the 6.4 installer on a VM running on a Xen
Host?
I tried enabling more logs during boot (boot_config->verbose) and got the
following logs (extract, not full log).
Any suggestions on how to troubleshoot this issue ?
Regards,
pvbus0 at mainbus0: Xen 4.10
Hello there,
I have been struggling to create a obsd 6.4 VM on xen(4.10.1) with HVM.
After booting from the CD (install64.iso as a virtual cdrom), the installer
cannot detect the disk to install the OS.
During the installation, the installer says: "Available disks are: none."
I already have a
4 matches
Mail list logo