On Wed, 15 Aug 2007, Edwards, David (JTS) wrote:
Hi,
Tape drives with a very large capacity are very expensive so I thought
I'd
use external USB drives instead.
While modifying the backup script, I thought I'd try using the drive as
a
tape device instead of going to the trouble of
On Wednesday 15 August 2007 03:30:48 Jacob Yocom-Piatt wrote:
i'm carping a couple machines with public IPs and would appreciate
recommendations for reliable 4-port switches for the task. there is a
single ethernet cable uplink to the ISP that i will feed into the
switch, then to the
Hi Peter,
Thanks a lot on the advice. Looks like its working now. cool!
Peter N. M. Hansteen [EMAIL PROTECTED] wrote: kintaro oe writes:
# no restriction on lan
pass quick on $int_if
# allow icmp incoming/outgoing to wan
pass quick on $ext_if inet proto icmp all
Unix traceroutes by
Hi,
I have setup amd to work like /net on a solaris box:
# cat /etc/amd/master
/net amd.net
#cat /etc/amd.net
/defaults type:=host;fs:=${autodir}/${rhost};rhost:=${key}
* opts:=ro,soft,intr,vers=3,proto=udp
I would like to use version 3 NFS if at all possible. I got vers=v3
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jacob Yocom-Piatt wrote:
[...]
i ask this because i've bought cheapo 4-port switches in the past and
had them seize-up on occasion. seize-ups are totally unacceptable to me
for this application so suggestions on which brand or model would be
Hi,
On 15/08/07, Stuart Henderson [EMAIL PROTECTED] wrote:
On 2007/08/15 11:49, Edd Barrett wrote:
amd:3653 on /net type nfs (v2, udp, intr, timeo=100, retrans=100)
that's the mount to the local amd instance, which is also done by nfs,
it's not the mount to the remote host.
Yes, sorry I
Hi,
Thanks for you suggestions.
On 15/08/07, Nicholas Marriott [EMAIL PROTECTED] wrote:
Try:
opts:=ro,soft,intr,nfsv3,udp
Here is my config file now
# cat amd.net
/defaults type:=host;fs:=${autodir}/${rhost};rhost:=${key}
* opts:=ro,soft,intr,nfsv3,udp
Here is proof the
Here is my config file now
# cat amd.net
/defaults type:=host;fs:=${autodir}/${rhost};rhost:=${key}
* opts:=ro,soft,intr,nfsv3,udp
Hrm, I thought this was working for me but I think I was confused. It doesn't
look like OpenBSD's amd supports it, none of the obvious
On Thu, 9 Aug 2007 12:58:13 -0600
Joshua Gimer [EMAIL PROTECTED] wrote:
We are planning on moving a large amount of Exchange mailboxes to
UNIX mbox format.
My question is, does anyone know of any projects out there or of any
tools that can assist in this conversion?
Thanks
Josh
Johan M:son Lindman wrote:
On Wednesday 15 August 2007 03:30:48 Jacob Yocom-Piatt wrote:
i ask this because i've bought cheapo 4-port switches in the past and
had them seize-up on occasion. seize-ups are totally unacceptable to me
for this application so suggestions on which brand or model
I'm building a firewall / gateway on OpenBSD and seem to have the pieces
working separately, but need a clue as to how to get them to fit
together. Basically, I can connect to and from each interface but not
across them.
I can connect from A to B (and from B to A) via SSH, ping, HTTP
I can
On Wednesday, August 15, 2007 at 15:59:34 +0300, Lars Noodin wrote:
I'm building a firewall / gateway on OpenBSD and seem to have the pieces
working separately, but need a clue as to how to get them to fit
together. Basically, I can connect to and from each interface but not
across them.
I can
Hi,
On 15/08/07, Christian Weisgerber [EMAIL PROTECTED] wrote:
IIRC, OpenBSD's amd only supports v2.
Any idea if it hard to make v3 compatible?
--
Best Regards
Edd
---
http://students.dec.bournemouth.ac.uk/ebarrett
On Wed, Aug 15, 2007 at 12:03:37PM +0100, David Given wrote:
Jacob Yocom-Piatt wrote:
[...]
i ask this because i've bought cheapo 4-port switches in the past and
had them seize-up on occasion. seize-ups are totally unacceptable to me
for this application so suggestions on which brand or
Maurice Janssen wrote:
The two most obvious things to look at:
- enable IP-forwarding on the fw/router
That was mentioned in one of the first steps of the guides or howtos as
being taken care of in /etc/sysctl.conf. Here's an except from mine:
# grep forw /etc/sysctl.conf
I have a USB2/Firewire external drive with a removable tray I use for
backup. When the disk is connected in the following sequence:
1. connect USB cable
2. insert disk on removable tray into enclosure
3. turn on power switch to drive
4. turn on key to power disk
The backup runs at USB1 speeds. If
On Wednesday, August 15, 2007 at 18:50:26 +0300, Lars Noodin wrote:
Maurice Janssen wrote:
The two most obvious things to look at:
- enable IP-forwarding on the fw/router
That was mentioned in one of the first steps of the guides or howtos as
being taken care of in /etc/sysctl.conf. Here's an
Maurice Janssen wrote:
Looks OK to me. You could try tcpdump on the internal and external
interface to try to find out where the packets get lost.
Thanks. I was doing that and could see that they were getting to the
one interface but not the other. After giving up, coming back, and
messing
The manpage for scp(1) mentions the -B option for running scp in batch
mode, but no further details. How can scp be run without prompting
for a password?
Thanks.
On Wednesday 15 August 2007 13:50, you wrote:
How can scp be run without prompting for a password?
Set up ssh shared keys.
Dan RamaleyDial Center 118, Drake University
Network Programmer/Analyst
On Wed, 15 Aug 2007, James Hartley wrote:
The manpage for scp(1) mentions the -B option for running scp in batch
mode, but no further details. How can scp be run without prompting
for a password?
It sets Batchmode yes. So read the ssh_config manpage about BatchMode.
You must still setup
On Thu, Aug 09, 2007 at 02:22:31AM +0200, James Lepthien wrote:
Hi,
I have set up a vpn from my OpenBSD Box (4.1-current) to our company
WatchGuard X700. My problem is that the re-keying
isn't always working and my tunnel does not come up if I send traffic to
the destination network. I
James Hartley wrote:
The manpage for scp(1) mentions the -B option for running scp in batch
mode, but no further details. How can scp be run without prompting
for a password?
Thanks.
passwordless rsa key?
On Mon, Aug 13, 2007 at 01:30:11AM +0300, Sergey Prysiazhnyi wrote:
ike dynamic from any to any \
main auth hmac-sha1 enc aes group modp1024 \
quick auth hmac-sha1 enc aes psk secret
; ike passive, ike passive esp, ike esp, etc - no results.
On the openbsd gateway you need
On 2007/08/15 16:01, Sam Fourman Jr. wrote:
I am PRETTY sure there is no way to do a pf rdr command based on a hostname
and I am just trying to confirm this
confirmed.
Maybe I could somehow use hostated?
What I want to do is have 4 seprate Windows XP Professional workstations
with
On 2007/08/15 18:08, John Nietzsche wrote:
Does anybody know what is this file about?
see /sbin/dhclient-script
Why is it there?
saved resolv.conf from before dhcp
May i remove it ?
if you don't need it.
Hi there,
Am 15.08.2007 um 22:24 schrieb Hans-Joerg Hoexer:
On Thu, Aug 09, 2007 at 02:22:31AM +0200, James Lepthien wrote:
Hi,
I have set up a vpn from my OpenBSD Box (4.1-current) to our company
WatchGuard X700. My problem is that the re-keying
isn't always working and my tunnel does not
Does anybody know what is this file about?
Why is it there?
May i remove it ?
Thanks in advance.
hello misc@
I am PRETTY sure there is no way to do a pf rdr command based on a hostname
and I am just trying to confirm this
Maybe I could somehow use hostated?
What I want to do is have 4 seprate Windows XP Professional workstations
with 192.168.x.x address behind a pf firewall
and be able to
And I should mention, that in the any to any case you can not use -K and
you have to specify an isakmpd.policy file.
On Wed, Aug 15, 2007 at 10:37:59PM +0200, Hans-Joerg Hoexer wrote:
On Mon, Aug 13, 2007 at 01:30:11AM +0300, Sergey Prysiazhnyi wrote:
ike dynamic from any to any \
change port RDP listens on:
http://support.microsoft.com/kb/306759
configure the Remote Desktop client to connect to a specific port:
http://support.microsoft.com/kb/304304/
I looked those up a while ago to get access using the Rdesktop package
OBSD has. Truly excellent package...
HTH,
Bryan
I think you can do that with squid, but better change port numbers of
rdp servers and clients.
Sam Fourman Jr. wrote:
hello misc@
I am PRETTY sure there is no way to do a pf rdr command based on a hostname
and I am just trying to confirm this
Maybe I could somehow use hostated?
What I want
dang it... once more, for feeling...
change port RDP listens on:
http://support.microsoft.com/kb/306759
configure the Remote Desktop client to connect to a specific port:
http://support.microsoft.com/kb/304304/
I looked those up a while ago to get access using the Rdesktop package
OBSD has.
-Original Message-
From: Otto Moerbeek [mailto:[EMAIL PROTECTED]
On Wed, 15 Aug 2007, Edwards, David (JTS) wrote:
Hi,
Tape drives with a very large capacity are very expensive
so I thought I'd use external USB drives instead.
[snip]
I'd say it's not safe, because a /dev/sdXc
On Wed, Aug 15, 2007 at 10:37:59PM +0200, Hans-Joerg Hoexer wrote:
On Mon, Aug 13, 2007 at 01:30:11AM +0300, Sergey Prysiazhnyi wrote:
ike dynamic from any to any \
main auth hmac-sha1 enc aes group modp1024 \
quick auth hmac-sha1 enc aes psk secret
; ike passive, ike
Sam Fourman Jr. wrote:
hello misc@
I am PRETTY sure there is no way to do a pf rdr command based on a hostname
and I am just trying to confirm this
Maybe I could somehow use hostated?
What I want to do is have 4 seprate Windows XP Professional workstations
with 192.168.x.x address behind
Nick Holland wrote:
as stated, you can't do what you want to do the way you propose doing it.
To be specific, if you want to have multiple sites behind one IP address
and one port, you need an application proxy. With http, you can do this
with host headers and a reverse http proxy. You
37 matches
Mail list logo
