The problem no longer exists, thanks to a patch entered into cvs
yesterday afternoon. Huge thanks to Ken Westerback, Theo, and the
rest of the development team. This may have been a little thing,
but it's the sort of response that keeps me loving OpenBSD. Time to
save up a little more for
On 8/21/05, Kenneth R Westerback [EMAIL PROTECTED] wrote:
Looks like the OpenBSD client issues a DISCOVER, gets a proper reply
from the Linksys box, issues the confirming REQUEST, and gets
garbage back. And around and around it goes.
Can you get a tcpdump of the 3.7 dhclient succeeding?
On 8/21/05, Kenneth R Westerback [EMAIL PROTECTED] wrote:
Hmm. What was the -s parameter to tcpdump? My first look at the dump
shows only the first 80 bytes or so, which may be the default. We
need the entire packets captured. So a -s of 1000 would be good.
At Kenneth's request, I've redone a
On 8/17/05, Christian Jones [EMAIL PROTECTED] wrote:
I had similar (nearly identical) problems about a month ago using a
then-current snapshot, also with a Linksys router, with a wi(4) card,
a problem I didn't see in 3.7. I further would recieve a console
message Discarding packet with
Christian Jones wrote:
On 8/17/05, Kenneth R Westerback [EMAIL PROTECTED] wrote:
I would find it helpful. An exact model of Linksys device would also
help.
The specific model I've had problems with (don't know about the OP) is
a BEFW11S4 ver. 2 Wireless Access Point and Cable/DSL
Nuzaihan Kamalluddin wrote:
Maybe you should try a workaround, like manual setup of the ip address and
routing,
ifconfig wi0 192.168.1.x netmask 255.255.255.0
route add default 192.168.1.1
Should work, maybe there is something blocking the dhcpoffer packets from
your router, or maybe since it
I successfully installed the 8/16 snapshot at the office (which uses a
different DHCP server) and dhclient acquires a lease with no problem.
However, at home (using a Linksys router as the DHCP server), dhclient
fails to get a lease. As noted earlier, dhclient from 3.7 works fine
at
both
On 8/17/05, Emmett Pate [EMAIL PROTECTED] wrote:
I successfully installed the 8/16 snapshot at the office (which uses a
different DHCP server) and dhclient acquires a lease with no problem.
However, at home (using a Linksys router as the DHCP server), dhclient
fails to get a lease. As noted
I'd like to install the latest snapshot on a laptop that's currently
running 3.7-release. The boot CD fails to get a dynamic IP address. My
question is where is the most appropriate archive/list to research
whether this is a known problem? I just want to make sure I'm posting
to the correct
Have you tried dhclient interface at the shell?
On 8/14/05 9:02 PM, Emmett Pate [EMAIL PROTECTED] wrote:
I'd like to install the latest snapshot on a laptop that's currently
running 3.7-release. The boot CD fails to get a dynamic IP address. My
question is where is the most appropriate
Emmett Pate wrote:
I'd like to install the latest snapshot on a laptop that's currently
running 3.7-release. The boot CD fails to get a dynamic IP address. My
question is where is the most appropriate archive/list to research
whether this is a known problem? I just want to make sure I'm
On 8/14/05 9:02 PM, Emmett Pate [EMAIL PROTECTED] wrote:
I'd like to install the latest snapshot on a laptop that's currently
running 3.7-release. The boot CD fails to get a dynamic IP address. My
question is where is the most appropriate archive/list to research
whether this is a known
12 matches
Mail list logo
