Craig Skinner wrote:
Darren Spruell wrote:
For the scenario where you have two openbsd hosts, one connected to
the second with a serial null modem cable, what is the right device to
use when connecting using tip(1) from the first to a console on the
second?
[snip]
Then, on either box, I
* Stuart Henderson [EMAIL PROTECTED] [2007-09-14 21:39]:
USB - the number of boxes I've had to disable USB on to stabilise,
this would not usually be my first choice. ymmv, as they say (-:
wtf?
out of the about 180 i control i don't have a simgle one with usb
disabled...
--
Henning Brauer,
* L. V. Lammert [EMAIL PROTECTED] [2007-09-14 18:33]:
At 12:00 PM 9/14/2007 -0400, Trash Compactor wrote:
Alternatively, you can put puc(4) cards into an OpenBSD box or hook
up a tangle of ucom(4) adapters to a tree of powered USB hubs
There are several multi-port USB-serial adapters
On Fri, Sep 14, 2007 at 09:40:44AM +0200, Raimo Niskanen wrote:
Can someone clarify the difference between /dev/tty00 and /dev/cua00?
to some extent these are documented in tty(4).
jmc
On 2007/09/14 09:40, Raimo Niskanen wrote:
But for local non-modem connect you want to use tip tty00 that
uses /dev/tty00, direct connect, no phone number.
I use cu -l cua00.
Can someone clarify the difference between /dev/tty00 and /dev/cua00?
tty(4) explains all.
* Daniel Ouellet [EMAIL PROTECTED] [2007-09-14 07:02]:
As we are on the subject and I do not want to deviate from the original
question, I would however appreciate suggestions as to how I can have a one
server witch can actually have up to 32 serial console to control LOM on
Sun server. I
Darren Spruell wrote:
For the scenario where you have two openbsd hosts, one connected to
the second with a serial null modem cable, what is the right device to
use when connecting using tip(1) from the first to a console on the
second?
This works very well for me on i386;
2 null modem
Henning Brauer wrote:
there are multiport usb-serial adapters. and of course you can use
multiple of them.
This may be really really stupid, but for Mac minis that have no serial
ports listed in their dmesg (e.g:
http://erdelynet.com/tech/openbsd/openbsd-on-intel-mac-mini/) could you
use
On Fri, Sep 14, 2007 at 11:16:46AM +0100, Craig Skinner wrote:
| Henning Brauer wrote:
| there are multiport usb-serial adapters. and of course you can use
| multiple of them.
|
|
| This may be really really stupid, but for Mac minis that have no serial
| ports listed in their dmesg (e.g:
|
Paul de Weerd wrote:
I'm afraid not. It must be a real serial port, supported by the BIOS
and all that stuff. You can run a getty on a USB-serial adapter, but
console must be the real thing.
That makes perfect sense with the BIOS, thanks!
Thank you!
On Fri, Sep 14, 2007 at 09:05:06AM +0100, Jason McIntyre wrote:
On Fri, Sep 14, 2007 at 09:40:44AM +0200, Raimo Niskanen wrote:
Can someone clarify the difference between /dev/tty00 and /dev/cua00?
to some extent these are documented in tty(4).
jmc
--
/ Raimo Niskanen,
Daniel Ouellet [EMAIL PROTECTED] wrote:
As we are on the subject and I do not want to deviate from the original
question, I would however appreciate suggestions as to how I can have a
one server witch can actually have up to 32 serial console to control
LOM on Sun server. I may need up to
Christian Weisgerber wrote:
Daniel Ouellet [EMAIL PROTECTED] wrote:
As we are on the subject and I do not want to deviate from the original
question, I would however appreciate suggestions as to how I can have a
one server witch can actually have up to 32 serial console to control
LOM on
At 12:00 PM 9/14/2007 -0400, Trash Compactor wrote:
Alternatively, you can put puc(4) cards into an OpenBSD box or hook
up a tangle of ucom(4) adapters to a tree of powered USB hubs
There are several multi-port USB-serial adapters available. You can get
bus-powered ones up to around 8 DB9
On 9/14/07, Craig Skinner [EMAIL PROTECTED] wrote:
Darren Spruell wrote:
For the scenario where you have two openbsd hosts, one connected to
the second with a serial null modem cable, what is the right device to
use when connecting using tip(1) from the first to a console on the
second?
On 9/14/07, Trash Compactor [EMAIL PROTECTED] wrote:
Greg Thomas wrote:
On 9/14/07, Craig Skinner [EMAIL PROTECTED] wrote:
Darren Spruell wrote:
For the scenario where you have two openbsd hosts, one connected to
the second with a serial null modem cable, what is the right device to
L. V. Lammert wrote:
At 12:00 PM 9/14/2007 -0400, Trash Compactor wrote:
Alternatively, you can put puc(4) cards into an OpenBSD box or hook
up a tangle of ucom(4) adapters to a tree of powered USB hubs
There are several multi-port USB-serial adapters available. You can
get bus-powered ones
On 2007/09/14 13:48, Trash Compactor wrote:
L. V. Lammert wrote:
At 12:00 PM 9/14/2007 -0400, Trash Compactor wrote:
Alternatively, you can put puc(4) cards into an OpenBSD box or hook
up a tangle of ucom(4) adapters to a tree of powered USB hubs
There are several multi-port USB-serial
On Fri, Sep 14, 2007 at 10:03:00AM -0700, Greg Thomas wrote:
$ sudo tip tty01
Is this just for boot messages? It's my understanding (minimal, at
that) that you can't do this for logins both directions because getty
will tie up the port?
Nope, full access as connecting from tty01 on one
For the scenario where you have two openbsd hosts, one connected to
the second with a serial null modem cable, what is the right device to
use when connecting using tip(1) from the first to a console on the
second?
These suggest that cua is the right device to use:
Darren Spruell wrote:
...
If cua00 is the right device to use when connecting out, why the
missing phone number error?
That means your /etc/remote file is still at its defaults (which
perhaps should change):
tty00|For hp300,i386,mac68k,macppc,mvmeppc,vax:\
As we are on the subject and I do not want to deviate from the original
question, I would however appreciate suggestions as to how I can have a
one server witch can actually have up to 32 serial console to control
LOM on Sun server. I may need up to 48 in one case, but instead of using
a bunch
22 matches
Mail list logo
