Hey Ryan,
On Thu, 2003-03-13 at 18:38, Ryan Underwood wrote:
> Now it displays the output of the capture card and capturing works.
> But, the output it displays in the window is greenish. The sliders
> all affect the image in one way or another, but it still looks like
> an oddly colored negative
Hey Andrew,
On Thu, 2003-03-13 at 22:03, Andrew Stevens wrote:
> Ronald: can you take an Eyeball to the bits marked LEAVE_OUT_FIX
> in zoran_device.c - I think this fixes an obvious inconsistency in the code...
Looks good, probably one of the minor weirdities that need tweaking
before we can cal
Also, append a "site:sourceforge.net" in your search, which will
restrict hits to the site specified.
non-searchable archives is definitely a pain. Its even hard to believe
that they can't be searched. I've complained about this before (and
even suggested the above), search the archives to see o
On Thu, 13 Mar 2003, Frank Bax wrote:
> The sourceforge archives appear not to be searchable - are the
> searchable archives?
> http://sourceforge.net/mailarchive/forum.php?forum=mjpeg-users
They are searchable. Have a look at the upper left, where you can
normally search for "Software/Group". Th
rbroman wrote:
>
> My system is a 2p Xeon with an Iomega BUZ card. I'm running RH8.0
> with custom 2.4.20 kernel. I've compiled and installed driver-zoran,
> jpeg-mmx, avifile, quicktime4linux, libmovtar and mjpegtools-1.6.1.
> It took me a while to get it right, but it now appears the compile and
Well, most of the time I don't like being wrong.
but this time I do.
Thank you Markus for pointing this out.
Scott
On Fri, 14 Mar 2003, Markus Plail wrote:
> On Thu, 13 Mar 2003, Frank Bax wrote:
>
> > The sourceforge archives appear not to be searchable - are the
> > searchable archiv
I am wondering if glav (or rather lavplay) applies some form of
de-interlacing algorithm before output? Can I suppress this behaviour
if it does?
The reason being, I am using glav to edit broadcast television
programming (i.e. edit out commercials) and while I am doing that I want to
(manually, v
On Friday 14 March 2003 17:08, [EMAIL PROTECTED] wrote:
> I am wondering if glav (or rather lavplay) applies some form of
> de-interlacing algorithm before output? Can I suppress this behaviour
> if it does?
It does. You can. Just give -F to lavplay/glav for that genuine interlace
experience.
/
I have some problem comiling mjpegtools-1.6.1
If any can helph me...
I try to find an error in te code but I'm not able to find the definition
of the subscirved methods of the namespace avm.
I'm using a Redhat 7.3. The compilation fails with lav2divx and yuv2divx, the others
parts works grea
Perhaps it could be possible to create a search page at sourceforge that
simply accepted the search parameters and passed them off to google?
At 08:31 AM 3/14/03, Scott Moser wrote:
Also, append a "site:sourceforge.net" in your search, which will
restrict hits to the site specified.
non-searchabl
On Fri, Mar 14, 2003 at 05:42:03PM +0100, Martin Samuelsson wrote:
>
> It does. You can. Just give -F to lavplay/glav for that genuine interlace
> experience.
Excellent! I looked at the source (briefly) but did not think to look
for it associated with "flicker".
As an editing tool, I would lov
Hallo
> As an editing tool, I would love if glav had "letterbox markers". By
> that I mean "rules" you could adjust top and bottom on the edge
> between the picture and the black top/bottom borders. Think like the
> "rules" you can use in destop publishing/layout software. As you
> adjust the r
Well, I tricked y4mscaler into doing what I want, but the results were
a bit discouraging. To get a horizontal lowpass spatial filter with
cutoff N/D<1 I just did a downsample by N/D followed by an upsample by
N/D (using the sinc8lan kernel). What I found was that (to my eye)
there was no visibl
On Fri, Mar 14, 2003 at 06:56:54PM +0100, Bernhard Praschinger wrote:
> Hallo
Hi Bernhard,
> I'm nearly finished with adding that feature in LVS.
Oh cool! Do let me know when you are finished. I would love to try
it out.
> But you can easily check if the boarders are set correct with with
>
Hi again.
I already wrote about my audio sync problems when converting a digital
television mpeg2 stream to a svcd.
I use mplayer to play the video and encode it then with mpeg2enc. After
that I extract the audio (also with mplayer), encode it. After that the
result is always out of sync.
I was po
Hi -
I'm a slow learner sometimes it would seem.
I completely neglected the fact that due to the 4:2:0 nature of
the data that changing the chroma values affects *4* pixels and
not just the pixel that is currently being examined. Oops. That
explains the
"Steven M. Schultz" <[EMAIL PROTECTED]> wrote:
On clean material I didn't see theneed for the more aggressive value. For DV sources (from a Digital8 camcoder) '-l 1 -t 6' is good, for captures from a goodsource (laserdisc) '-l 2 -t 6'. The really bad sources such as VHSget '-l 3 -t 4' (VHS is so l
On Freitag, 14. März 2003 23:07 Steven Boswell II wrote:
> I'd love to see a section in the MJPEG FAQ that had collected
> denoising experience like this.
Me too.
I tried 10 different versions for an old dark indoor VHS-C-Movie and
found out, that it gets better, but softer, with a combination
I have an NTSC 30fps interlaced laserdisc with some footage which I am
told was originally 24fps. I have run lavrec, then yuvscaler -M
LINE_SWITCH and the result looks good, except frames 4/5 from each
sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and
this interlace effect is g
On 14 Mar 2003, scott wrote:
> I have an NTSC 30fps interlaced laserdisc with some footage which I am
> told was originally 24fps. I have run lavrec, then yuvscaler -M
> LINE_SWITCH and the result looks good, except frames 4/5 from each
> sequence of 5 have a interlace effect. I then run yuvkinec
>I have an NTSC 30fps interlaced laserdisc with some footage which I am
>told was originally 24fps. I have run lavrec, then yuvscaler -M
>LINE_SWITCH and the result looks good, except frames 4/5 from each
>sequence of 5 have a interlace effect. I then run yuvkineco -F 4 and
>this interlace
Matthias Czapla wrote:
Hello all!
Im new to this list and video processing in general so please excuse me if
my questions seem stupid, thanks.
I have a mpeg-file and want to create a svcd-image with vcdimager, but it
tells me the following:
<[EMAIL PROTECTED] ~>vcdimager -t svcd -l 'Good Bye Leni
22 matches
Mail list logo
