Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread Holland Phillips
The wiring diagrams in the Bentley are notoriously difficult to follow. Until you get used to the way the runs jump around from page to page, it can be extremely frustrating. I don't have a Bentley anymore, or I would try and give you some help. ~Holland On Mar 23, 2016 10:29 PM, "damac2004" wrot

Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread damac2004
i forgot to add this picture. maybe i need to look closer but it looked like the connector wire is exposed and touching that main ground leg. is it possible the connector has its own cover and is running inside inside the ground run? i can try and cut some back and look at it. i was exp

Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread damac2004
yes i bought a new bosch 02 sensor. i have a feeling when somebody did a engine swap they cut the 2nd knock sensor harness. i do see a leg cut clean at the end of the drivers side loom with a white, black and blue wire. haven't looked it up in bently yet, wouldn't surprise me if that is it.

Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread Steven Arguello
So you bought a new 3wire O2 sensor? If so, the black is the signal not the ground. (The sensor is grounded through the exhaust?) After the orange connector the signal wire back to the ecu is a little thicker because it's a coaxial cable, it has a braided shield around the signal wire. This shi

Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread Holland Phillips
No worries, that's what this list is for. At this point, as far as the O2 sensor wiring is concerned, if everything compares with the Bentley, you're probably okay. What concerns me, is how a Motronic ECU is going to deal with having only one knock sensor. I guess your best bet is to hook up what y

Re: [mk2-16v] how do i find out what engine i have?

2016-03-23 Thread damac2004
hate to bug people but i'm just tidying things up with a new 02 sensor and want to make sure before i start it up and time it. i pulled the whole harness that goes to the ecu just to make sure. i do only have the 1 knock sensor. don't see any special shielded wiring. the 02 harness side has

RE: [mk2-16v] Transfer pump gasket - part number? source?

2016-03-23 Thread Larry Velez
The original part is still available and you can get it from GermanAutoParts or others. 91 GTI 16V 4B0 919 133, Fuel Sender Seal - ~$22 - Transfer Pump gasket 191 906 383C, Fuel Pump Relay - ~$10 - Fuel Pump Relay -Larry 91 GTI 16V From: mk2-16v@googlegroups.com [mailto:mk2-16v@goog