Try running a zip program on the non gcd file. (I normally use 7z, but
I assume other will work as well)
It should let you extract the GUPDATE.GCD from the .exe
Bill
On 08/20/2016 12:54 PM, ael wrote:
On Sat, Jul 30, 2016 at 03:38:30PM -0400, Mark Bradley wrote:
You may be able to locate f
On Sun, Aug 21, 2016 at 11:28:07AM -0400, Greg Troxel wrote:
>
>
> Thanks for posting your resolution. If I follow correctly, it sounds
> like once you normalize the waypoint files, then your only real complaint
> about 4.30 is startup slowness. It sounds like you can display
> mkgmap-generate
On Thu, Jul 28, 2016 at 08:25:32PM +0100, ael wrote:
> On Thu, Jul 28, 2016 at 10:29:07AM -0700, nwillink wrote:
> > 2) "Route calculation error";
> >
> > 3) "The route does not match the available maps. Cannot follow the roads
> >
> > ie
> >
> > 1) I have previously routed from A to B using
On Sat, Jul 30, 2016 at 03:38:30PM -0400, Mark Bradley wrote:
>
> You may be able to locate firmware for your unit at
> www.gawisp.com/perry/agree.html.
Thanks again for the suggestion. Unfortunately that is just an archive
of the dumbed down Webupdaters (which assumes particular operating system
> Message: 3
> Date: Thu, 28 Jul 2016 20:06:46 +0100
> From: ael
> To: mkgmap-dev@lists.mkgmap.org.uk
> Subject: Re: [mkgmap-dev] Problems with routing on Etrek 20 with
> latest firmware
> Message-ID: <20160728190646.GA4953@shelf.conquest>
> Content-Type
I've noted that recently Basecamp routing is very problematic if you don't
start or end on a street. In general Basecamp routing got much worse with
the last 2-3 versions. Also on some devices there are degradations.
On 28 July 2016 at 21:34, ael wrote:
> On Thu, Jul 28, 2016 at 05:43:53PM +
On Thu, Jul 28, 2016 at 05:43:53PM +, Gary Bamford wrote:
> I have seen something similar, but only when i copy a map to the gps, rather
> than copy it to the sd card and then put the sd card into the gps, power
> cycling the gps after copying your new map may solve the problem
Again, thank
On Thu, Jul 28, 2016 at 10:29:07AM -0700, nwillink wrote:
> 2) "Route calculation error";
>
> 3) "The route does not match the available maps. Cannot follow the roads
> precisely. Do you want to recalculate the the route?" Choosing [Yes]
> gives "Route calculation error. Maps do not have routab
On Thu, Jul 28, 2016 at 04:51:11PM +0200, Thomas Morgenstern wrote:
> Basecamp is available also for MAC, not only windows.
I know. But I am using linux. Wine is a Windows emulation on linux, so
I might try that, as I noted earlier.
>Your problems are dependent from the map.
Unless the reverse e
On Thu, Jul 28, 2016 at 12:36:03PM -0400, Greg Troxel wrote:
>
> do you have pointers to older firmware, and can you roll back to 4.20?
Garmin seem to do their best to make it difficult to get their firmware
images. Anyway, I seem to remember reading that it was not possible to
roll back to older
: 28 July 2016 17:29
To: mkgmap-dev@lists.mkgmap.org.uk
Subject: Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware
2) "Route calculation error";
3) "The route does not match the available maps. Cannot follow the roads
precisely. Do you want to recalculat
2) "Route calculation error";
3) "The route does not match the available maps. Cannot follow the roads
precisely. Do you want to recalculate the the route?" Choosing [Yes]
gives "Route calculation error. Maps do not have routable roads in this
area."
I ALWAYS get this on my Oregon 450 and G
ot;
Datum: Donnerstag, 28. Juli 2016 16:24
An:
Betreff: Re: [mkgmap-dev] Problems with routing on Etrek 20 with latest
firmware
On Thu, Jul 28, 2016 at 01:05:40PM +, Gary Bamford wrote:
Hi Ael.
That's a strange on, I have no experience with the Etrek 20, but my
starting point would
On Thu, Jul 28, 2016 at 01:05:40PM +, Gary Bamford wrote:
> Hi Ael.
>
>
> That's a strange on, I have no experience with the Etrek 20, but my starting
> point would be to load the map up into Basecamp, I would do this by putting
> the sd micro into a reader that way basecamp sees exactly th
Gary
From: mkgmap-dev on behalf of ael
Sent: 28 July 2016 12:55
To: mkgmap-dev@lists.mkgmap.org.uk
Subject: [mkgmap-dev] Problems with routing on Etrek 20 with latest firmware
I hope this is an appropriate post for this list.
Since I updated my Garmin Etrex 20 to the latest fir
I hope this is an appropriate post for this list.
Since I updated my Garmin Etrex 20 to the latest firmware (4.30
[http://www8.garmin.com/support/download_details.jsp?id=5553]),
I have had problems with routing with OSM maps generated with
mkgmap.
So far, I have only tried standard maps from
http
16 matches
Mail list logo