he attached file in JOSM and change it for testing,
> > e.g. add a new POI to verify that your device use the new map.
> >
> > Gerd
> >
> > ________
> > Von: mkgmap-dev im Auftrag
> > von Stephan Warzecha
> > Gesendet: Montag, 18.
2020 14:59
An: mkgmap-dev@lists.mkgmap.org.uk
Betreff: [mkgmap-dev] Routing Issue with Garmin Edge 830
Hello,
I am sorry but I have a question better called problem.
my new Garmin Edge 830 ist crashing down, sometimes during navigation. I askes
this question here because garmin told me that the map
could be these 2 steps-islands:
http://www.openstreetmap.org/?mlat=45.6603mlon=12.25836zoom=18
Indeed, routing islands are one of the worst things in OSM-routing.
The new mkgmap function is_connected may help a little.
Also ORS is not able to find a foot-route to the hospital:
could be these 2 steps-islands:
http://www.openstreetmap.org/?mlat=45.6603mlon=12.25836zoom=18
Indeed, routing islands are one of the worst things in OSM-routing.
The new mkgmap function is_connected may help a little.
Also ORS is not able to find a foot-route to the hospital:
Strange it seems for me ORS is working,
http://www.zimagez.com/zimage/screenshot-04062013-095909pm.php
On Fri, Apr 5, 2013 at 11:36 AM, chris66 chris66...@gmx.de wrote:
could be these 2 steps-islands:
http://www.openstreetmap.org/?mlat=45.6603mlon=12.25836zoom=18
Indeed, routing
Am 06.04.2013 22:04, schrieb Enrico Liboni:
Strange it seems for me ORS is working,
Yes, because you have set ORS to car mode. The highway=steps are not
routable for cars, so in car mode they are no routing-islands.
Garmin is working a little bit different, because the routing network
is the
Marko, Chris
thanks a lot, I'll give a try with the styles - actually I'm not using
any custom style. One strange behavior I loaded the very same map in
another Garmin device (different model) and I can route to it properly -
but I did not disable the basemap so maybe it's defaulting to it and
On Thu, Apr 04, 2013 at 11:05:55PM +0200, Enrico Liboni wrote:
One strange behavior I loaded the very same map in another Garmin
device (different model) and I can route to it properly - but I did not
disable the basemap so maybe it's defaulting to it and since it is
surely different from the
On Sun, Mar 31, 2013 at 12:38:25AM +0100, Enrico Liboni wrote:
Back to the POI I was experiencing the issue with, if I try to reach it
now, the device does not try even to calculate the route, as if the POI
was really not defined correctly. If I navigate to another POI in front
of the former or
Am 31.03.2013 09:45, schrieb Marko Mäkelä:
Look at the ways around the POI. Could the nearest routeable way be a
routing island (not connected to the rest of the road network, for
example because of a missing junction node)?
The only routing island I find in this area is this footway:
Am 31.03.2013 12:23, schrieb chris66:
The only routing island I find in this area is this footway:
Also could be these 2 steps-islands:
http://www.openstreetmap.org/?mlat=45.6603mlon=12.25836zoom=18
Indeed, routing islands are one of the worst things in OSM-routing.
The new mkgmap function
Am 31.03.2013 13:22, schrieb chris66:
The new mkgmap function is_connected may help a little.
So what you could try in your style:
highway=steps {add mkgmap:check_connected = true}
preceeding your ordinary highway=steps ...
Chris
___
mkgmap-dev
Folks, I'm sometime getting routing issues to some POIs - most seems ok but
some are always showing the problem. I'm wondering if what I'm hitting is
the problem described at:
http://wiki.openstreetmap.org/wiki/Mkgmap/known_issues#add-pois-to-areas_sometimes_places_the_POI_outside_the_polygon
Him
On Sat, Mar 30, Enrico Liboni wrote:
Folks, I'm sometime getting routing issues to some POIs - most seems ok but
some are always showing the problem. I'm wondering if what I'm hitting is
the problem described at:
If I go to Tools-Settings-Map-Map Info only the OSM map is enabled.
However I believe the basemap - if I understood correctly what the
basemap is - is always enabled
by default since when zooming out I can see mountains and (high)ways
outside the tiles I used for my osm map.
I tried by renaming
On Sat, Mar 30, Enrico Liboni wrote:
If I go to Tools-Settings-Map-Map Info only the OSM map is enabled.
However I believe the basemap - if I understood correctly what the
basemap is - is always enabled
by default since when zooming out I can see mountains and (high)ways
outside the tiles
Thorsten many thanks for your help!!!
My osm generated map is routable and I was wrong in my previous post: I did
some further tests with renaming the base map to gmapbmap.iii - so the
device can't use the basemap - and I can properly navigate to address/pois,
just in some pretty long routes
On 2:59 PM, Francisco Moraes wrote:
Can you download the region around your route and compile it with
mkgmap with logging enabled? Does it complain anything relevant?
I will try it tomorrow if I hae time.
I did this yesterday and generated a map and didn't see any issues on
the mkgmap log.
On Wed, Jan 11, 2012 at 10:02:16AM -0500, Francisco Moraes wrote:
I did this yesterday and generated a map and didn't see any issues on
the mkgmap log. Mapsource routing works fine. I tried to test it on the
GPS, but the move to location didn't appear to be working, so I can't
verify the
On Oregon you can force it with setting GPS-mode to GPS-simulation. Now
you can route to any point and the Oregon can jump to that point or
simulate the route.
Henning
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
On Fri, Jan 06, 2012 at 06:05:06PM -0500, Francisco Moraes wrote:
I have seen some strange routing issues with the way below. If I am
driving south, my GPS wants me to make a U-turn where the divided
highway ends. It seems like the ways are not connected but I checked and
I can't find anything
On 2:59 PM, Henning Scholland wrote:
Hi
The fault is in osm-data. There is no turn restriction tagged. I've
added such an restriction.
But why do I need the turn restriction here? I haven't seen this type of
routing problem in other roads that have a similar layout where the
split/divided ways
On Sat, Jan 07, 2012 at 09:13:25AM -0500, Francisco Moraes wrote:
But why do I need the turn restriction here? I haven't seen this type
of routing problem in other roads that have a similar layout where the
split/divided ways merge into one. I thought there would be some
discontinuity somewhere
On 2:59 PM, Marko Mäkelä wrote:
One idea is the observation that in the USA (at least California), it
seems to be common to have compulsory U-turns. On a divided street,
the divider would not be interrupted in every crossing, like it
usually is in Europe. But in this case, the Hopson Rd/Louis
On 2:59 PM, Marko Mäkelä wrote:
Right, that's why I asked where you were heading to and what the
routing suggestion looked like. Was the Garmin unit configured to
auto-recalculate, and was there some bad coverage (tunnels) that
caused it to jump somewhere else and back? Or could there be some
Hi,
I have seen some strange routing issues with the way below. If I am
driving south, my GPS wants me to make a U-turn where the divided
highway ends. It seems like the ways are not connected but I checked and
I can't find anything wrong in the OSM data.
Hi
The fault is in osm-data. There is no turn restriction tagged. I've
added such an restriction.
Henning
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
@Markus:
Are there any signs, that the destination road is a oneway?
The destination i want to get routed to is about at the point
http://www.openstreetmap.org/browse/node/1079735170
So it is not a oneway.
I was just right now by foot out at the place with the Garmin Dakota
to
I've tested it on a Dakota with similar road situations but I can't reproduce
this routing error.
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
In this situation my Garmin Dakota 20 is routing me up the oneway part
several roads around the block to get to the target just down the
street.
Could it be that we are incorrectly merging the oneway street with the
non-oneway street, making the non-oneway section oneway? What are the
I notice the road turning left (Kreuzstraße (11412195) that you want to
be routed on), is tagged access:destination.
Does this maybe mean that the router will only use it if it is your
actual destination, or if there is no other means to reach your destination.
Was your destination that
On Thu, 7 Apr 2011, Johann Gail wrote:
@Markus:
Are there any signs, that the destination road is a oneway?
The destination i want to get routed to is about at the point
http://www.openstreetmap.org/browse/node/1079735170
So it is not a oneway.
I was just right now by foot out at the place
Hi,
I get some wrong/bad routing results when it comes to a starting
onewayroad. Like it is on a crossing like this one:
^: the oneway road
- |: the normal roads whithout oneway
+: the corner point of the roads
^
^
^
^
^
^
+--- coming from here
|
|
|
|
|
|
|
|
want to get routed
On Wed, Apr 06, 2011 at 08:37:37PM +0200, Markus Hetzmannseder wrote:
In this situation my Garmin Dakota 20 is routing me up the oneway part
several roads around the block to get to the target just down the
street.
Could it be that we are incorrectly merging the oneway street with the
Hello,
I was not really able to pin down the cause of a routing issue I
obtain on both nüvi 755 and Oregon 550. (using mgkmap 1652)
If I was routing to the node
http://www.openstreetmap.org/browse/node/619703862/history I obtained
the message No street found near the destination (free
Mark Burton schrieb:
In german city Hameln turn-restrictions are used like hell,
but they don't seem to work.
Err, yes. I broke them. Fixed now in 1414.
Hi Mark,
don't works for me.
Still MapSource routes me directly to Koppenstraße or
Hunoldstraße coming from B1 left.
v1414 (latest)
my
Hi Chris,
don't works for me.
Still MapSource routes me directly to Koppenstraße or
Hunoldstraße coming from B1 left.
v1414 (latest)
my command line:
java -Xmx1200m -ea -esa -jar ..\mkgmap\mkgmap.jar --latin1
--description=test --country-name=DE --country-abbr=DE --family-id=5
Mark Burton schrieb:
don't works for me.
Still MapSource routes me directly to Koppenstraße or
Hunoldstraße coming from B1 left.
v1414 (latest)
my command line:
java -Xmx1200m -ea -esa -jar ..\mkgmap\mkgmap.jar --latin1
--description=test --country-name=DE --country-abbr=DE
very mysterious indeed.
I now deactivated all other maps in MS-Registry (6.13.7),
rebuild mkgmap.jar freshly from trunk, but get again the wrong routing.
Could you give me your command line and send me your
mkgmap.jar?
Thank you Mark for sending your mkgmap.jar and your command line.
Hi Chris,
And now the reason for my map not using the TRs :
the missing --ignore-osm-bounds !
So, if I understand correctly :
when compiling data that comes out of splitter
--ignore-osm-bounds should not be used, but when
compiling small areas (from XAPI or stored from
JOSM),
In german city Hameln turn-restrictions are used like hell,
but they don't seem to work.
http://www.bilder-space.de/show.php?file=02.12Ft6hRZHIiEanBbI.gif
On the left side the only_straight_on restriction is not applied,
on the right side there is a funny routing.
MapSource-Setting is
Hi Chris,
In german city Hameln turn-restrictions are used like hell,
but they don't seem to work.
http://www.bilder-space.de/show.php?file=02.12Ft6hRZHIiEanBbI.gif
On the left side the only_straight_on restriction is not applied,
on the right side there is a funny routing.
I looked at
http://www.bilder-space.de/show.php?file=02.12Ft6hRZHIiEanBbI.gif
On the left side the only_straight_on restriction is not applied,
on the right side there is a funny routing.
The routing on the right side is caused by a wrong
'oneway=yes' on way #24229789.
So remains the question why
Chris-Hein Lunkhusen escribió:
In german city Hameln turn-restrictions are used like hell,
but they don't seem to work.
http://www.bilder-space.de/show.php?file=02.12Ft6hRZHIiEanBbI.gif
On the left side the only_straight_on restriction is not applied,
on the right side there is a funny
Hi Chris,
In german city Hameln turn-restrictions are used like hell,
but they don't seem to work.
Err, yes. I broke them. Fixed now in 1414.
Apologies to all.
Mark
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
*From* Nakor nakor.wp at gmail.com
mailto:mkgmap-dev%40lists.mkgmap.org.uk?Subject=Re:%20%5Bmkgmap-dev%5D%20Good%20news%20for%20Nakor%21In-Reply-To=%3C4AEE522B.4050403%40gmail.com%3E
*on* /Mon Nov 2 03:29:47 GMT 2009/
/
// Well, today's commit to limit the number of points in a way appears to
Hello,
I have an issue when I try to go in my Garmin nüvi 755 to the node
http://www.openstreetmap.org/browse/node/493911864 (name=Sogesco Ducos).
The nüvi is showing a route to somewhere else approximately to node
http://www.openstreetmap.org/browse/node/481738937 (name=Almameto).
This occurs
Hello Hendrik,
I have an issue when I try to go in my Garmin nüvi 755 to the node
http://www.openstreetmap.org/browse/node/493911864 (name=Sogesco Ducos).
The nüvi is showing a route to somewhere else approximately to node
http://www.openstreetmap.org/browse/node/481738937
Hello Hendrik,
Using the map data you supplied and the latest version of mkgmap,
mapsource can route to that destination from almost anyway (sensible).
I haven't tried using a real gps.
Sorry, I don't know what is causing the problem you are seeing.
The command I used was:
java -Xmx800m
Mark Burton ma...@ordern.com wrote on 31/10/2009 at 08:49:37 +1100
subject [mkgmap-dev] Routing issue with mkgmap appeared since 1188 :
Using the map data you supplied and the latest version of mkgmap,
mapsource can route to that destination from almost anyway (sensible).
I haven't tried using
On Tue, Oct 13, 2009 at 09:22:33AM +0200, Carlos Dávila wrote:
I would like to know what's the effect of duplicate nodes on rutting.
Some areas of Spain are full of them (I have already fixed more than
60.000 in the Northwest).
I think that it was mentioned a few weeks ago when discussing
Marko Mäkelä escribió:
On Tue, Oct 13, 2009 at 09:22:33AM +0200, Carlos Dávila wrote:
I would like to know what's the effect of duplicate nodes on rutting.
Some areas of Spain are full of them (I have already fixed more than
60.000 in the Northwest).
I think that it was mentioned
However, that map is riddled with non-connected ways so even if the bug
is fixed, routing will still be very unreliable in that region until
someone fixes all the duplicate nodes.
This is WIP. As of now all Interstate, US and state routes should be OK
which provides basic
On Tue, Oct 13, 2009 at 09:11:14AM -0400, Nakor wrote:
Validator plugin comes up with lots of false positives (like duplicated
nodes one in a way and the other one in a city/county boundary) and is about
useless for that purpose in the US.
I tried to silence one class of bogus validator
Hi Nakor,
I haven't yet discovered why it appears to be impossible to cross
certain longitudes. I will keep thinking about it and, hopefully,
come up with a solution sometime.
However, that map is riddled with non-connected ways so even if the bug
is fixed, routing will still be very unreliable
Hi mark,
I haven't yet discovered why it appears to be impossible to cross
certain longitudes. I will keep thinking about it and, hopefully,
come up with a solution sometime.
Sure. Thanks for looking into this.
However, that map is riddled with non-connected ways so even if the bug
is
You are building your maps with assertions enabled, aren't you?
Cheers,
Mark
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Mark,
I build directly from the OSM files.
I also tried to build the map with assertions enabled (r1265) and it built
with no assertion showing up.
Thanks,
N.
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
Hi Nakor,
I can provide the osm data (22 Mb gzipped) if needed.
I think I need to see that because I tried with just a small region
around the problem area and it could route OK.
Can you put that data onto a web server somewhere?
Cheers,
Mark
___
Hi,
I can confirm that there are routing issues with that map, don't know
what the problem is at this time so I cannot give an ETA for a fix. I
will work on it as time allows.
Cheers,
Mark
___
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
Hello,
I have spotted a routing issue with a mkgmap generated map. I was able to
reproduce it in several versions: 1188, 1228 and 1265.
The source file is the Cloudmade Michigan file (Sep 30), that I split using
splitter. I can reproduce the issue either using the whole Michigan state (5
61 matches
Mail list logo