On Dec 17, 2018 at 2:26 PM, > wrote:
I have a Sietta EM7455 LTE modem in a recent Lede build: OpenWrt SNAPSHOT
r6550-83e1fce
I'm using a USA Sprint SIM. I did the AT commands to add the Sprint bands
and put the modem in MBIM mode.
ModemManager is v1.8.0
/etc/config/network has the following bloc
On Fri, Nov 9, 2018, 10:52 AM Aleksander Morgado Hey,
>
>
>
>>
>>
>> i installed libglib and got past that error but now have this. this is
>> just a small portion of the errors as it goes on and on.
>>
>> make[9]: Entering directory
>> '/home/russ/openwrt2/openwrt/build_dir/target-mipsel_24kc_mu
On Fri, Nov 9, 2018 at 4:32 PM Russ Westrem
wrote:
>
>
> On Fri, Nov 9, 2018 at 8:07 AM Aleksander Morgado <
> aleksan...@aleksander.es> wrote:
>
>> Hey,
>>
>> > make[8]: Entering directory
>> '/home/russ/openwrt2/openwrt/build_dir/ta
psel_24kc_musl/stamp/.package_compile'
failed
make[1]: ***
[/home/russ/openwrt2/openwrt/staging_dir/target-mipsel_24kc_musl/stamp/.package_compile]
Error 2
make[1]: Leaving directory '/home/russ/openwrt2/openwrt'
/home/russ/openwrt2/openwrt/include/toplevel.mk:216: recipe for targe
MM fails when trying to compile snapshots. It compiles fine on 18.06.1.
Anyone else having this issue?
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
Does anyone have a config or knows a way to bridge an em7565 ip to the
ethernet port within ubuntu desktop 18? I plan to use a router as the
dhcp and wireless then run a lan back to the eno2 port on my ubuntu
machine.
___
ModemManager-devel mailing list
Is it possible to get ipv6 using modemmanager with openwrt? I created a
dhcp ipv6 protocol interface and covered the wwan0. An ipv6 address shows
up but still doesn't work. If I restart modemmanager or reboot while the
ipv6 interface is active then nothing works. I have to delete/stop the
ipv6 i
Trying to compile modemmanager for openwrt and failing here.
make[8]: Entering directory
'/home/russ/openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/libmbim-1.16.2/src/libmbim-glib/generated'
GEN mbim-basic-connect.h
GEN mbim-sms.h
GEN mbim-ussd.h
GEN mbim
I've compiled and had working modemmanager with lede. Now when trying to
use it with openwrt it never establishes a connection. Does something
need to be done to use it with openwrt?
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesk
1199
SWI9X50C_01.05.01.00.cwe SWI9X50C_01.05.01.00_GENERIC_001.028_000.nvu
error: No serial device found to run QDL update operation
russ@russ-Studio-1745:/tmp$
On Tue, Apr 10, 2018 at 5:27 PM, Russ Westrem
wrote:
> EM7565 is stuck in qdloader mode. Im trying to use qmi-firmware-update
>
EM7565 is stuck in qdloader mode. Im trying to use qmi-firmware-update
tool. Im getting this error
russ@russ-Studio-1745:~$ sudo qmi-firmware-update \
> --update \
> -d 1199:9090 \
> --device-open-mbim \
> SWI9X50C_01.05.01.00.cwe \
> SWI9X50C_01.05.01.00_GENERIC_001.028_000.nvu
error: unknown
On Feb 20, 2018 12:12 PM, "Aleksander Morgado"
wrote:
On Tue, Feb 20, 2018 at 7:02 PM, Russ Westrem
wrote:
>
>
> On Tue, Feb 20, 2018 at 11:53 AM, Aleksander Morgado
> wrote:
>>
>> Hey!
>>
>> >> make[8]: Entering directory
>> >
On Tue, Feb 20, 2018 at 11:53 AM, Aleksander Morgado <
aleksan...@aleksander.es> wrote:
> Hey!
>
> >> make[8]: Entering directory
> >> '/home/russ/MM/source/build_dir/target-arm_cortex-a9+
> vfpv3_musl_eabi/libmbim-1.15.0-20161123/src/libmbim-glib'
> >> CC libmbim_glib_core_la-mbim-device.
On Feb 20, 2018 5:56 AM, "Aleksander Morgado"
wrote:
On Tue, Feb 20, 2018 at 1:29 AM, Russ Westrem
wrote:
>
> make[8]: Entering directory '/home/russ/MM/source/build_
dir/target-arm_cortex-a9+vfpv3_musl_eabi/libmbim-1.15.
0-20161123/src/libmbim-glib'
> CC
make[8]: Entering directory
'/home/russ/MM/source/build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/libmbim-1.15.0-20161123/src/libmbim-glib'
CC libmbim_glib_core_la-mbim-device.lo
mbim-device.c: In function 'initable_init_async':
mbim-device.c:2168:15: error: assignment from incompatible poin
I used to be able to compile just fine a few months ago but now I get
errors.
cc1: all warnings being treated as errors
Makefile:617: recipe for target 'libmbim_glib_core_la-mbim-device.lo' failed
make[8]: *** [libmbim_glib_core_la-mbim-device.lo] Error 1
make[8]: Leaving directory '/home/russ/so
I just ordered a em7565. Does modem manager work with this device?
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
I'm trying to help out a friend getting his mc7455 working in centos 7
4.12. Modem Manager is installed, network manager is installed. The
modem is present and connected in mmcli but we can't figure out how to get
this to work. I've tried mbim and qmi both. We did the mmcli simple
connect with
Ok. So I moved to a router with an onboard
pci-e to eliminate any problems with usb cables. The issue of disconects
are still there using qmi or mbim. This is only a 4.4 kernel lede build so
qmi is a ppp connection. I am getting a strange error though in ppp that
might help explain some things.
You're getting error 0x24 (dec 36), and according to 3GPP 24008 that is:
Cause value = 36 Regular deactivation
This cause code is used to indicate a regular MS or network initiated
PDP context deactivation or a regular network initiated MBMS context
deactivation.
so the network is de-registering
[1227]: bearer verbose call
end reason (3,1028): [cm] (NULL)
On Wed, Feb 15, 2017 at 6:25 PM, Russ Westrem
wrote:
>
>
> On Feb 15, 2017 5:39 PM, "Dan Williams" wrote:
>
> On Wed, 2017-02-15 at 17:09 -0600, Russ Westrem wrote:
> > On Feb 15, 2017 4:37 PM, "Da
On Feb 16, 2017 2:00 PM, "Dan Williams" wrote:
On Thu, 2017-02-16 at 17:36 +0100, Aleksander Morgado wrote:
> On Thu, Feb 16, 2017 at 4:29 PM, Russ Westrem
> wrote:
> > Im am trying to lock to 4g only.
> >
> > Modes| supported: &#x
Im am trying to lock to 4g only.
Modes| supported: 'allowed: 2g, 3g, 4g; preferred: none'
|current: 'allowed: 2g, 3g, 4g; preferred: none'
root@LEDE:~# mmcli -m 0 --set-allowed-modes=4g
error: couldn't set current modes:
'GDBus.Error:org.freedesktop.ModemManager1.E
On Feb 15, 2017 5:39 PM, "Dan Williams" wrote:
On Wed, 2017-02-15 at 17:09 -0600, Russ Westrem wrote:
> On Feb 15, 2017 4:37 PM, "Dan Williams" wrote:
>
> On Wed, 2017-02-15 at 21:14 +0100, Aleksander Morgado wrote:
> > On Wed, Feb 15, 2017 at 9:00 PM, Russ
On Feb 15, 2017 4:37 PM, "Dan Williams" wrote:
On Wed, 2017-02-15 at 21:14 +0100, Aleksander Morgado wrote:
> On Wed, Feb 15, 2017 at 9:00 PM, Russ Westrem
> wrote:
> > Is there anything in the modemmanager scripts that I could change
> > to have it
> > ignore
On Feb 14, 2017 11:20 PM, "Dan Williams" wrote:
On Tue, 2017-02-14 at 15:46 -0600, Russ Westrem wrote:
> You mean you can still use the WWAN even if MM says it's
> disconnected?
> Not sure I understood, otherwise.
>
>
> --
> Aleksander
> https://aleksander.
You mean you can still use the WWAN even if MM says it's disconnected?
Not sure I understood, otherwise.
--
Aleksander
https://aleksander.es
No, nothing is usable untill i ifup.
___
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop
>
>
>
> Ok, I'm using qmi in kernel 4.9 on LEDE now. So far 1 hour and no
> disconects.
>
Seems to have the same issue using LEDE kernel 4.9 in QMI it will stay up
for an hour and then do this.
Tue Feb 14 20:54:17 2017 daemon.info [1231]: bearer call end reason
(1008): 'gsm-wcdma-regular-d
On Feb 13, 2017 8:27 AM, "Russ Westrem" wrote:
On Feb 12, 2017 3:59 AM, "Aleksander Morgado"
wrote:
On Sat, Feb 11, 2017 at 11:48 PM, Russ Westrem
wrote:
> Ok this looks a little different than the last debug. I had a ping going
> and logged "LTE Down"
On Feb 12, 2017 3:59 AM, "Aleksander Morgado"
wrote:
On Sat, Feb 11, 2017 at 11:48 PM, Russ Westrem
wrote:
> Ok this looks a little different than the last debug. I had a ping going
> and logged "LTE Down" when pings stopped.
>
>
>
> Sat Feb 11 16:40:
On Feb 10, 2017 5:00 PM, "Russ Westrem" wrote:
On Feb 10, 2017 4:40 PM, "Aleksander Morgado"
wrote:
On Fri, Feb 10, 2017 at 11:37 PM, Russ Westrem
wrote:
> And generic firmware on the mc7455 is what I'm referring to.
>
Oh, so with the Generic firmwa
On Feb 10, 2017 4:40 PM, "Aleksander Morgado"
wrote:
On Fri, Feb 10, 2017 at 11:37 PM, Russ Westrem
wrote:
> And generic firmware on the mc7455 is what I'm referring to.
>
Oh, so with the Generic firmware you do get a good persistent
connection but not with the Sprint firn
On Feb 10, 2017 4:33 PM, "Aleksander Morgado"
wrote:
On Fri, Feb 10, 2017 at 11:08 PM, Russ Westrem
wrote:
> OK. I think we're getting to the bottom of this. For some reason if I
drop
> the connection for any reason the mc7455 tries to re-authenticate my
> connection.
On Feb 10, 2017 4:35 PM, "Russ Westrem" wrote:
On Feb 10, 2017 4:33 PM, "Aleksander Morgado"
wrote:
On Fri, Feb 10, 2017 at 11:08 PM, Russ Westrem
wrote:
> OK. I think we're getting to the bottom of this. For some reason if I
drop
> the connection for an
On Feb 10, 2017 3:24 PM, "Bjørn Mork" wrote:
Aleksander Morgado writes:
> You're getting error 0x24 (dec 36), and according to 3GPP 24008 that is:
>
> Cause value = 36 Regular deactivation
Oh, I didn't fint that. I guess this is in some other table there?
I'm glad I don't have to navigate th
Sorry I meant remap =24 to be acceptable?
On Feb 10, 2017 2:58 PM, "Russ Westrem" wrote:
> Could we remap =23 to be acceptable?
>
> On Feb 10, 2017 2:56 PM, "Russ Westrem"
> wrote:
>
>> I am using a sprint plan in generic mode on the mc7455. Does this
Could we remap =23 to be acceptable?
On Feb 10, 2017 2:56 PM, "Russ Westrem" wrote:
> I am using a sprint plan in generic mode on the mc7455. Does this have
> anything to do with it?
>
> On Feb 10, 2017 2:46 PM, "Aleksander Morgado"
> wrote:
>
> On F
I am using a sprint plan in generic mode on the mc7455. Does this have
anything to do with it?
On Feb 10, 2017 2:46 PM, "Aleksander Morgado"
wrote:
On Fri, Feb 10, 2017 at 9:37 PM, Russ Westrem
wrote:
> Fri Feb 10 14:33:23 2017 daemon.debug [1042]: [/dev/cdc-wdm0] Recei
MA open: 0
Fri Feb 10 14:33:36 2017 daemon.info [1042]: QCDM EVDO open: 0
Fri Feb 10 14:34:06 2017 daemon.info [1042]: loading access
technologies via QCDM...
Fri Feb 10 14:34:06 2017 daemon.info [1042]: (ttyUSB0): --> 4b 08
01 00 66 f5 7e
Fri Feb 10 14:34:06 2017 daemon.info [1042]: (tt
Should I set it to 0?
On Feb 10, 2017 2:08 PM, "Russ Westrem" wrote:
> It's unset at the moment.
>
> On Feb 10, 2017 2:07 PM, "Aleksander Morgado"
> wrote:
>
>> On Fri, Feb 10, 2017 at 7:46 PM, Russ Westrem
>> wrote:
>> > Ok. So it
It's unset at the moment.
On Feb 10, 2017 2:07 PM, "Aleksander Morgado"
wrote:
> On Fri, Feb 10, 2017 at 7:46 PM, Russ Westrem
> wrote:
> > Ok. So it seems I may have spoken a little too soon on the powered usb
> hub
> > working. Here is something I have
Ok. So it seems I may have spoken a little too soon on the powered usb hub
working. Here is something I have noticed.
It works for hours and hours at a time on bearer 0. Once an ifup is issued
to fix a downed connection the bearer changes to 1 then 2 and so on. On
these other bearers the discon
Yes. Only when using lede on a router. I just hooked it to a powered usb
hub. I am testing now. I will keep everyone posted.
The mc7455 on Ubuntu 16.04 with modemmanager went 24 hours with not a
single packet dropped while playing 2 hd videos at the same time.
On Feb 10, 2017 3:34 AM, "Aleksan
I'm starting to believe it does.
On Feb 9, 2017 3:25 PM, "Dan Williams" wrote:
> Is it at all related to the amount of data transferred?
>
> Dan
>
> On Thu, 2017-02-09 at 12:54 -0600, Russ Westrem wrote:
> > More info on these disconects. It seems that the
More info on these disconects. It seems that the better the signal and
faster the speed results in faster and more frequent disconects. Around 5
to 10 min. When the speeds and signal is worse it lasts around 30 to 40
min. When no data is being transferred it stays up indefinitely.
On Feb 9, 201
Feb 8, 2017 9:34 PM, "Sebastian Sjoholm"
wrote:
> > On Feb 8, 2017, at 21:14 , Russ Westrem
> wrote:
> >
> > I have tried locking bands and not locking them. My setup is stationary
> and does not switch towers or bands normally. But after about 30 min of
>
to issue an ifup. The bearer then changes to Mmcli -b 1 and
the connection lasts for another few minutes until the process repeats
itself.
On Feb 8, 2017 1:29 PM, "Dan Williams" wrote:
On Tue, 2017-02-07 at 10:02 -0600, Russ Westrem wrote:
> I asked this in someone else's
Out of it from everything I know.
I'm thinking of going the easy route and doing a tail of the logfile
On Feb 7, 2017 4:06 PM, "Aleksander Morgado"
wrote:
On Tue, Feb 7, 2017 at 10:49 PM, Russ Westrem
wrote:
> I suppose this could be somehow edited into the
> lib/netfid/
I suppose this could be somehow edited into the
lib/netfid/proto/modemmanager.sh?
On Feb 7, 2017 2:25 PM, "Aleksander Morgado"
wrote:
On Tue, Feb 7, 2017 at 9:03 PM, Russ Westrem
wrote:
> Ping scripts which I'm not very fond of. I dont want a ifup broadband
going
>
could be instantaneous.
daemon.info [1035]: Modem /org/freedesktop/ModemManager1/Modem/0:
state changed (connected -> registered)
On Feb 7, 2017 1:55 PM, "Aleksander Morgado"
wrote:
On Tue, Feb 7, 2017 at 5:02 PM, Russ Westrem
wrote:
> I asked this in someone else's
I asked this in someone else's e-mail but maybe i should have made my own
so here it is.
My goal is to issue an ifup broadband in LEDE whenever this line is logged
from modemmanager.
daemon.info [1035]: Modem /org/freedesktop/ModemManager1/Modem/0:
state changed (connected -> registered)
My pro
Do you know of any method to send an "ifup broadband" whenever this is
logged?
7 daemon.info [1096]: Modem /org/freedesktop/ModemManager1/Modem/0:
state changed (connected -> registered)
It seems that any band change or drop produces this and an ifup broadband
is needed to bring it back. A pin
I am using a mc7455 in MBIM mode on a LEDE build using modem manager.
QUESTION #1
i am getting these errors 10 min after a reboot. Im also having multiple
disconnects where it becomes unregistered. A ifup broadband will take care
of reconnecting it but after a few hours ifup broadband no longer
53 matches
Mail list logo
