: "Hans Otten" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, December 29, 2001 11:11 PM
Subject: Re: parallel port
> Are you sure this has worked with RuMSX?
>
> On a real MSX this direct access is no problem. But on RuMSX i doubt if
you
> can acce
> On Sat, Dec 29, 2001 at 10:18:40PM +0100, Cor Wessels wrote:
> > Hello,
> >
> > I want to sent some data to the parallel port and give a pulse on one
(or
> > two) of the other pins but can't figure out any more how it works. I had
it
> > working severa
ected to +5V.
- Original Message -
From: Hans Otten <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, December 29, 2001 11:11 PM
Subject: Re: parallel port
> Are you sure this has worked with RuMSX?
>
> On a real MSX this direct access is no problem. But on
Are you sure this has worked with RuMSX?
On a real MSX this direct access is no problem. But on RuMSX i doubt if you
can access the real parallel port this way.
And RuMSx is already better than other emu's, it does printer emulation.
But there is a software layer in between, i use it some
On Sat, Dec 29, 2001 at 10:18:40PM +0100, Cor Wessels wrote:
> Hello,
>
> I want to sent some data to the parallel port and give a pulse on one (or
> two) of the other pins but can't figure out any more how it works. I had it
> working several years ago but lost the source.
&
Hello,
I want to sent some data to the parallel port and give a pulse on one (or
two) of the other pins but can't figure out any more how it works. I had it
working several years ago but lost the source.
I have connected a test PCB with a resistor and LED connected to ground on
the par
Hi!
Below is a proposal for a JoyNet cable for the PC parallel port. I already
built one and it works well.
It can be used for transferring files between PC and MSX, for debugging (PC
logging everything which the MSXes send), by emulators that want to
implement JoyNet functionality etc.
Please
Maarten ter Huurne <[EMAIL PROTECTED]> wrote:
> Below is a proposal for a JoyNet cable for the PC parallel port. I already
> built one and it works well.
> It can be used for transferring files between PC and MSX, for debugging (PC
> logging everything which the MSXes send),