For future reference, there's a pretty good rundown on dnsmasq options
here: http://wiki.openwrt.org/OpenWrtDocs/dnsmasq
There are also a couple of places you can find the sample dnsmasq.conf file
so as to reverse-engineer it.
Glad all is working
On 5/31/07, Carlos <[EMAIL PROTECTED] > wrote
Thanks very much everyone, it is finally working and it is working great!
My problem was that I had 2 -- in front of the "dhcp-boot=" commands of
the dnsmasq section. I had been researching this for a few days now and the
the post I had copied the "dhcp-boot=" had the command as
"--dhcp-
I've got my mvpmc (along with everything else on my network) receiving DHCP
addresses from my sveasoft (http://www.sveasoft.com) equipped WRT56G router.
The Sveasoft firmware uses dnsmasq to run DHCP.
I did the following to get it all to work:
- Enabled TFTP on my MythTV box and set up the boot
Carlos wrote:
> I have been trying to look through the previous post of this list but I
> keep getting a "500 - Internal Server Error" page.
http://news.gmane.org/gmane.comp.multimedia.mvpmc.user
Works for me.
> I am wondering if anyone has managed to get a router working, running
> either dd
I have been trying to look through the previous post of this list but I keep
getting a "500 - Internal Server Error" page. So, I apologize if this has
been asked before.
I have setup a windows pc with dhcp and tftp server, tested it and is
working, as my setup with workign with static ip addressi
