Terry Barnaby wrote:
Hi Daniel,
XvMC VLD in a Via M10K box is now working better, but still not right.
The main problem now is that sometimes channel changes work and
sometimes they don't.
I have tracked this down to an issue with the OSD.
When the channel change fails the code is stuck in
Hi,
Are there any future plans to support the CI high level interface of the
DVB API ? From what I can tell only the Link layer level interface of the
API is implemented.
The Twinhan card uses this High level interface, you can read about it here
Your OSD fix in CVS has certainly fixed the problem with changing
channels due to the OSD locks. Thanks. Things are much better now.
However I have still had a channel change fail after quite a few
changes. Here is an example where two channel changes worked Ok
and the third failed. On the third
On Friday 06 May 2005 05:38, Joel David Elkins wrote:
I think you should also disable distcc and ccache in the myth configure
stage, since these are handled transparently by portage.
ok
i have just used ccache to build split 2.4 on my laptop (looks good) so i know
that it is working and can
Is there any easy way for code running on a frontend to get the proper
hostname of the master backend for use when saving information to the DB
where you have to set the hostname to the backend name, not the frontend
name?
Thanks,
Kevin
___
Hi Robert,
i can't comment on the changes itself, but please resend it with all
strings marked for translation by the tr(EXAMPLE) function as they
were originally.
Bye, Stefan
Robert Tsai [EMAIL PROTECTED] writes:
StatusText was missing a few strings. I wrote some macros to keep the
enums,
When i go into the program management screen mythtv gives a sigseg.
I have upgraded to QT 3.3.4, and tested it on mythtv v 0.18 mythtv CVS @
6.5.2005 (DD/MM/).
It worked before i checked EPG to Use on air guide (in the channel editor in
mythtv-setup) on a DVB-S channel (VIVA on astra).
On Fri, 2005-05-06 at 07:30 +0100, Terry Barnaby wrote:
Your OSD fix in CVS has certainly fixed the problem with changing
channels due to the OSD locks. Thanks. Things are much better now.
However I have still had a channel change fail after quite a few
changes. Here is an example where
Daniel Kristjansson wrote:
On Fri, 2005-05-06 at 07:30 +0100, Terry Barnaby wrote:
Your OSD fix in CVS has certainly fixed the problem with changing
channels due to the OSD locks. Thanks. Things are much better now.
However I have still had a channel change fail after quite a few
changes. Here is
On 5/5/05, Kevin Kuphal [EMAIL PROTECTED] wrote:
Is there any easy way for code running on a frontend to get the properhostname of the master backend for use when saving information to the DB
where you have to set the hostname to the backend name, not the
On Fri, 2005-06-05 at 10:09 -0400, Micah F. Galizia wrote:
Hello,
I've attached a patch that adds MythMainWindow::ClearKeylist, which
unbinds keys (without having to restart myth). Using this and
RegisterKey, I can update controls without having to restart myth.
Thanks
And this is the
On Fri, 2005-06-05 at 15:08 -0400, Micah F. Galizia wrote:
On Fri, 2005-06-05 at 10:09 -0400, Micah F. Galizia wrote:
Hello,
I've attached a patch that adds MythMainWindow::ClearKeylist, which
unbinds keys (without having to restart myth). Using this and
RegisterKey, I can update
Quoting Andrew [EMAIL PROTECTED]:
Are there any future plans to support the CI high level interface of the
DVB API ? From what I can tell only the Link layer level interface of the
API is implemented.
The Twinhan card uses this High level interface, you can read about it here
Christopher David Petersen wrote:
On 5/5/05, *Kevin Kuphal* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote:
Is there any easy way for code running on a frontend to get the proper
hostname of the master backend for use when saving information to
the DB
where you have to set the
On 5/6/05, Kevin Kuphal [EMAIL PROTECTED] wrote:
Christopher David Petersen wrote: On 5/5/05, *Kevin Kuphal*
[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Is there any easy way for code running on a frontend to get the proper hostname of the master backend for use when saving information to
On Fri, May 06, 2005 at 01:28:42PM +0200, Stefan Frank wrote:
i can't comment on the changes itself, but please resend it with all
strings marked for translation by the tr(EXAMPLE) function as they
were originally.
OK; done.
--Rob
Index: libs/libmythtv/jobqueue.cpp
I'm not sure my other updates were seen, but (some of) this is new
anyways. Attached is a updated plugin that handles jump points, and a
patch (the same one sent earlier) to allow keybindings to be unbound (so
they can be rebound without the old keys triggering actions they should
not).
Enjoy
--
When I first got my Dish Network satellite, I immediately noticed that
the video was leading the audio. So when myth was up and running I
wrote this filter to fix the problem and slow down the video.
The basic idea is that the filter gets passed a size from the TV
Playback screen along the lines
I just got CVS code today, May 6th, at around 7pm US Eastern time.
I am compiling on a SUSE 9.1 Professional machine.
I used the following line in the mythplugins directory:
./configure --enable-opengl --disable-mythgame --disable-mythphone
When building, I get errors linking both mythgallery
I'm having a problem when a recording ends that the backend will get a
SIGSEGV. It's not every time, but it is fairly frequent. I have been
able to get a trace (with CVS as of 8pm pacific May 6th) and was hoping
someone could shed some light on the problem. Let me know if there's
anything
20 matches
Mail list logo
