On Sat, Dec 11, 2004 at 11:51:11PM -0600, Nate Carlson wrote:
> So basically write a shell wrapper that gets called for transcode, and
> looks at the channel number or something?
Well, I would actually look at the resolution of the stream if you can
extract that. You want to transcode a 480i dif
I just tried the new [Custom Record] option in the Myth CVS. This is
really COOL!
PBS has a neat series called "blah blah blah, A Naked Planet Special".
Using [Custom Record], it is easy to set up a rule to record these shows.
I only have one complaint; it does not seem to match "Previously
I posted something about this a week ago but didn't get much help and am
still stuck. I'm following Jarod Wilson's FC2 HOW-TO w/ PVR-350 TV-out. I'm
at the point where I'm attempting to reload X over the 350's TV-out. I've
edited xorg.conf to my specific settings and when I hit crtl-alt-backspace
On Fri, 10 Dec 2004, Brad Templeton wrote:
You want a fancier system that knows when a program is truly HD, and
records it HD if it is, but from either the twinned SD channel when it
isn't or from the cable.
Yeah, got'cha. Recording from the HD channel too often doesn't bug me
much, though - dis
has anyone got the IR Remote working for the VStereme XTreme USB card? i
believe it is the kworld dvb card but i cant find any information about
getting lirc to work for it.
if you have got it working and you can explain how, or point me in the
right direction that would be great
Steve
_
Paul Andreassen wrote:
Any experiences out there from Australian users on which commercial
detection scheme works best ? I turned off commercial detection a while
back in frustration but now I'm getting weary pulling commercials out by
hand.
I've also turned off commercial detection. Have you
On Saturday 11 December 2004 13:24, [EMAIL PROTECTED] wrote:
> I installed an M179 as a secondary card in my system. The audio out of it
> is considerably louder than my pvr-250. The m179 matches the volume of
> music and dvd's so it seems to be an issue with the pvr. Any thoughts on
> how to bump
"john roberts" <[EMAIL PROTECTED]> writes:
> Has anyone gotten the HD2000 and the HD3000 cards to co-exist yet?
> I've read of issues - just wondering if anyone has gotten it to work
> yet.
As far as I can tell, the new drivers will not tune the HD-2000
properly, so unless the new cx88 driver and
Has anyone gotten the HD2000 and the HD3000 cards to co-exist yet? I've read
of issues - just wondering if anyone has gotten it to work yet.
I just received my HD3000 card - and was wondering what I was up against (I
already have a HD2000 card).
Thx!
-John
--
___
Folks,
For those of you using Jarod's guide for FC3, I just wanted to let you
know that transcode is now in the FC3 apt repository, so the
first step in Jarod's guide is no longer necessary. I'm building
another frontend witth his guide and it works perfectly.
Kudos to the team. Another great
[EMAIL PROTECTED] wrote:
I installed an M179 as a secondary card in my system. The audio out of it is
considerably louder than my pvr-250. The m179 matches the volume of music and
dvd's so it seems to be an issue with the pvr. Any thoughts on how to bump up
the volume on it?
___
> On Sat, 2004-12-11 at 09:06, David Johnstone wrote:
> > Any experiences out there from Australian users on which commercial
> > detection scheme works best ? I turned off commercial detection a while
> > back in frustration but now I'm getting weary pulling commercials out by
> > hand.
>
> Hi Da
none that I can tell. Most of my postings on this get little response.
I do know that XvMC does make it worse, and compiling without OpenGL
seemed to make it a little better, but since I cannot get OpenGL vsync
to actually work, I have no idea if this would help or not. First
things first...
> Also recently I've read on the dev list that somebody is working on
> integrating full iso rips in mythdvd as an extra "quality" setting,
> without extra scripts etc...
Hoping so. By now, every time I upgrade myth it resets the xml pages
to their default content and I have to redo the work..
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:mythtv-users-
> [EMAIL PROTECTED] On Behalf Of Franco
> Sent: 11 December 2004 21:53
> To: [EMAIL PROTECTED]
> Subject: Re: [mythtv-users] NEW - BIG PROBLEM! Watching LiveTV is very
> slow
>
> > 2) SWITCHING CHANNEL WHILE WATCHING LI
Tom Williams wrote:
Hi All,
I am new to MythTv, but I have setup a RH9 box the details are below.
Here is what I am dealing with when I launch xawtv it seems fine the
video is smooth no big issues there, when I fire up mythfrontend, and
try to watch the video it seems very choppy, audio is out o
Franco wrote:
Also he was describing what happens when you click
the "WATCH TV" button. When you press a button labeled like
that, you are just supposed to get live-TV functionality!! :-)
Not PVR functionality! :-)
LiveTV is always recording so you can pause it, etc. If you just want
to watch
Hello,
I have just brought online my installation of MythTV. For the most part all is
working however I cannot get LIRC to work as a second instance to change
channels
on my Cable box via a homemade IR Blaster.
Some background:
I have a P4 w/ 1 Gig Ram
2x 80 Gig SATA w/ 3Ware Raid 1 (OS)
1x 25
> 2) SWITCHING CHANNEL WHILE WATCHING LIVE TV
> So it takes 5 sec. to change the channel!!
It happens to mee, too (PVR350 PAL) It's very annoying and makes
not that good impression when I try to demonstrate myth to people... :-(
> we never use Myth to watch LiveTV
> The whole idea behind a PVR
>
The audio out on my pvr250 is significantly lower than my M179, dvds, music,
etc.
Any way I can turn up the default volume?
___
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I installed an M179 as a secondary card in my system. The audio out of it is
considerably louder than my pvr-250. The m179 matches the volume of music and
dvd's so it seems to be an issue with the pvr. Any thoughts on how to bump up
the volume on it?
__
Hello,
Tom Williams wrote:
Hi All,
I am new to MythTv, but I have setup a RH9 box the details are below.
Here is what I am dealing with when I launch xawtv it seems fine the
video is smooth no big issues there, when I fire up mythfrontend, and
try to watch the video it seems very choppy, audio is
Brad Templeton wrote:
On Fri, Dec 10, 2004 at 07:09:54PM -0600, Nate Carlson wrote:
...
1) How does recording schedulding work for HDTV? My PVR-250's are hooked
up to the local cable feed; the PCHDTV card will be set up for OTA. If a
show is available via both HDTV and cable, how do I tell it I p
Hi All,
I am new to MythTv, but I have setup a RH9 box the details
are below. Here is what I am dealing with when I launch xawtv it seems fine
the video is smooth no big issues there, when I fire up mythfrontend, and try
to watch the video it seems very choppy, audio is out of sync…any
On Fri, 2004-12-10 at 21:18, Mario L wrote:
> I can vouch for having this issue too. I upgraded to CVS to try and
> fix other problems as well as this. It seems that this will happen
> less frequently, but will still occur for at least 1 of the commercial
> breaks during an one hour episode, or e
I'm running Arch linux (similar to gentoo in that it uses bleeding
edge everything, but distributed more in binary form).
Here's the hardware:
GF4 MX440 128MB AGP8X
Athlon 1700+
NF7-S
512MB PC3200
20GB WD200
PVR 250
BTTV pos card
And the software:
kernel 2.6.9 (arch IDE build)
mythtv CVS as of 12
That's what it was. Thanks.
rc.local looks like this and all is well
---/etc/rc.d/rc.local
touch /var/lock/subsys/local
/sbin/modprobe ivtv
modprobe lirc_i2c
/usr/sbin/lircd -d /dev/lirc/0
Thanks again
--- Erik <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Please check which device the lirc kerne
On Saturday 11 December 2004 18:16, Daniel Howell wrote:
> Hi all,
>
> New to the list and, as with many first time posters I imagine, having
> the typical problems. Not actually with MythTV itself (well, some minor
> little problems, but one thing at a time, eh?!). If these questions
> really need
Mark H <[EMAIL PROTECTED]> wrote:
> I've been fighting to get nuvexport MPEG2-MPEG2
> working. It seems to blow up on lvemux (gives error
> opening a/v streams (1/0). But the mp2 and m2v files
> are fine.
Obviously they aren't :)
>I am thinking about changing from using lvemux to
> mplex
Hi all,
New to the list and, as with many first time posters I imagine, having
the typical problems. Not actually with MythTV itself (well, some minor
little problems, but one thing at a time, eh?!). If these questions
really need to be directed towards the ivtv mailing list, then fair
enough - te
On Sat, 9 Oct 2004 00:14:55 +0200, jon e wishbone
<[EMAIL PROTECTED]> wrote:
>
> > >>2004-09-26 16:52:04 ReadStringList timeout (quick).
> > >>Remote encoder not responding.
> > >>2004-09-26 16:52:04 33 QUERY_RECORDER 1[]:[]IS_RECORDING
> > >>QSocketDevice::writeBlock: Invalid socket
> > >>20
ok I tried the pvr 250 card in every pci slot. This did rectify the
problem with 2 devices having the same IRQ, however I still can't get
rid of the
ivtv: Bus Mastering is not enabled
ivtv: Error -6 on initialization
ivtv: iTVC15/16 mpg2 encoder card: probe of :00:0c.0 failed with
error
Shawn,
Please log it in bugzilla.
On Fri, 10 Dec 2004 21:18:23 -0600, Mario L <[EMAIL PROTECTED]> wrote:
> I can vouch for having this issue too. I upgraded to CVS to try and
> fix other problems as well as this. It seems that this will happen
> less frequently, but will still occur for at le
Hi,
Please check which device the lirc kernel modules create. On my Gentoo box
(Kernel 2.6.9) this is /dev/lirc/0 and thus the lircd should be started with
-d /dev/lirc/0 and not /dev/lirc.
Regards,
Erik
On Saturday 11 December 2004 09:02, Richard C. Isaacson wrote:
> I had this issue earlie
Hi Jared,
On Sat, 11 Dec 2004 01:18:34 -0700, Jared McIntyre
<[EMAIL PROTECTED]> wrote:
> How do you get to the initial setup dialog for the mythfrontend on OS
> X or where are the settings stored so that I can change them? The
> first time I ran it, I accidentally configured it to the wrong
> ad
On Thu, 2004-12-02 at 07:02, Mark Spieth wrote:
> tz_local_offset works on each time supplied individually. I tested it.
> works.
> thus 1am on last sund of oct is +1000 and 4am on same day is +1100 and diff
> on the dates gets 2 hours as it should be.
> cache dir set was mainly for testing so I c
Hello group
Some mp3-songs which I can play on one pc with kaboodle I can not play on
another with MythMusic.
I get an error:
DecoderMAD: Cannot find a valid MPEG header.
This are missing codecs?
--
no panic
___
mythtv-users mailing list
[EMAIL PROTE
Brad Templeton wrote:
Why would you want to do RAID for a backup machine? Assuming we are
talking disks full of backups, you already have 2 copies of that data,
so you are not in trouble if a drive fails, you just put up a new one
and backup the original data again.
RAID is for systems that need
I can't seem to find this thing described in the documentation...
What is the list of TV-out hardware supported by MythTV that has perfect
quality?
I.e., direct output of interlaced video is supported, no image resizing
is performed anywhere in the chain between the video file and the TV
screen, e
Semi-success, brought on by massive Googling the world:
1) Buy a video amp. (this was recommended on a list a while ago, and I had
one sitting around. I went from mostly-no channels to mostly-all channels.
Mine is a $20 one from Radio Shack. Once I installed this the tuning by
channel number (nt
I had this issue earlier. It is strange and frustrating.
Though I found that I was getting bit errors over my PVR-250 into the
backend. For about 6 hours I used my keyboard. Then I checked the output
for the backend and found that the errors went away and I could then
bounce the lircd stuff and
41 matches
Mail list logo
