e my Audigy 2, you'll have crackling and
popping sound in MythTV :(
Good Luck!
Sérgio Gomes
--
Chad wrote:
Hello!
I am having quite the time here trying to configure an SB Live to
capture within Myth.
I know this is not indicative of anything, but with tvtime, TV sounds
just fine.
I h
erimenting, do regular backups, and don't mind using a
relatively new filesystem, then go for Reiser4, it should be the fastest
and best in terms of journalling.
Sérgio Gomes
---
Stef Coene wrote:
Hi,
Currently, I have a 70 GB partition formatted as ext3. It's a bit slow when
dele
27;s setup, who posted his similar problems. It must be
something in the emu10k1 driver that MythTV doesn't like.
So, what I can say is, if you have a TV card with a dongle cable to
connect to a line-in, don't connect it to an emu10k1. MythTV won't like it!
Thanks for beari
Alexander Petkov wrote:
I have the same problem when I connect the audio from the tv-tuner card to the
line-in input of my built-in soundcard. The solution here was to actually
connect the audio to the mic-in input of the soundcard (and play with the
recording levels a bit). That stopped any
ill hopefully narrow it down to either
playback or recording.
Maybe I'll also try swapping TV cards and seeing what happens.
Sérgio Gomes
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
David Ellis wrote:
Lower your volume level on the card setup in mythsetup.I think the
problem is with an input volume level that is too high.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sérgio Gomes
Sent: Friday, September 02, 2005 5
Well, I can only say I never had any problems with crackling outside
MythTV, and I've used numerous players, and both OSS and ALSA...
---
Jay Jarvinen wrote:
On Fri, 02 Sep 2005 21:59:39 +0100
Sérgio Gomes <[EMAIL PROTECTED]> wrote:
Inside MythTV:
- The amount of crackling (
Nick wrote:
On 02/09/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
Hello everyone!
I'm probably one of the very few people left with a non-PVR analog card
(a simple Hauppauge WinTV Go, based on cx8800). The audio goes from the
TV card to the sound card via a simple external stere
lease
version). --> shouldn't be the problem because of all the above reasons
- WinTV Go 2 with cx8800 chip
- Audigy 2 ZS (snd-emu10k1 module), with hardware mixing
- MythTV 0.18.1 compiled from source in AMD64 (as the rest of my system)
- Using PAL BG
Thank you for bearing with me through t