Hamish Moffatt wrote:
On Sun, Feb 13, 2005 at 06:01:17PM +1100, Chris Edwards wrote:
Hamish Moffatt wrote:
In my scans in Melbourne, none of the networks give any network
information for any other network. All of VHF stations list only their
own frequency for Melbou
On Sun, Feb 13, 2005 at 06:01:17PM +1100, Chris Edwards wrote:
> Hamish Moffatt wrote:
> >In my scans in Melbourne, none of the networks give any network
> >information for any other network. All of VHF stations list only their
> >own frequency for Melbourne, except SBS which lists half a dozen
> >
Hamish Moffatt wrote:
In my scans in Melbourne, none of the networks give any network
information for any other network. All of VHF stations list only their
own frequency for Melbourne, except SBS which lists half a dozen
different frequencies.
So I had to manually enter 5 multiplexes.
Yup, that's
On Sat, Feb 12, 2005 at 09:23:24PM +1100, Rob Hillis wrote:
> Chris Edwards wrote:
>
> >Not sure where you are, but make sure you set the bandwidth correctly.
> >That's 7MHz if you're in Australia. I had to provide a frequency too.
> >Actually, i had to provide all the frequencies, one by one.
>
Chris Edwards wrote:
Not sure where you are, but make sure you set the bandwidth correctly.
That's 7MHz if you're in Australia. I had to provide a frequency too.
Actually, i had to provide all the frequencies, one by one.
You normally shouldn't need to do that if you did a "Full Transport
Scan"
Mark Blair wrote:
When trying to scan with a known Freq It's failing. Using tzap from the
DVB utils get's a FE_LOCK just fine. But the logging from setup reports
no lock, any ideas what is going wrong ?
Not sure where you are, but make sure you set the bandwidth correctly.
That's 7MHz if you'r
When trying to scan with a known Freq It's failing. Using tzap from
the DVB utils get's a FE_LOCK just fine. But the logging from setup
reports no lock, any ideas what is going wrong ?
best
Mark
___
mythtv-users mailing list
mythtv-users@mythtv.org
h