On Thu, 17 Nov 2005 01:05:10 -0800, Mark Oliver <[EMAIL PROTECTED]>
wrote:
Blake wrote:
So, here's my DEMSG excerpt:
...
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt :00:12.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
eth0: VIA Rhine I
Blake wrote:
So, here's my DEMSG excerpt:
...
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt :00:12.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
eth0: VIA Rhine II at 0xdd00, 00:0c:76:93:08:a1, IRQ 11.
eth0: MII PHY found at address 1,
On Thu, 2005-11-17 at 00:03 -0800, Blake wrote:
> But since the machine can ping itself both at
> localhost and at the IP I've set it up as (192.168.0.240) I'm not sure
> it's relevant.
FYI, a ping to loopback or to your own IP address will never get as far
as the NIC since Linux will short ci
So, here's my DEMSG excerpt:
...
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt :00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
eth0: VIA Rhine II at 0xdd00, 00:0c:76:93:08:a1, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d