Hi.
I have a motorised satellite dish. With my satellite set-top box I can
successfully point it to the different satellites by specifying the
satellite's location.
Could someone please confirm the following:
I'm trying to setup a NEXUS-S DVB-S card. I have defined my capture card
as dvb:0:
Card #: 0
Card name: ST STV0299 DVB-S
Card type: DVB-S
Disecq input type: Disecq v1.3 positioner (goto x)
This gives me 19 inputs. Do I understand correctly that each different
satellite (Astra 1, Hotbird 1-5, Turksat 1C, etc) will connect to a
different input? Because this is what I did:
I defined 3 different video sources "Astra 1", "Hotbird 1-5" and
"Turksat 1C".
On the input connections screen I pointed Input1 to the Astra 1 video
source, Input2 to the Hotbird 1-5 video and Input3 to the Turksat 1C
video source.
Then I went to the Channel Editor screen, selected the Astra1 video
source and let it scan for channels. I filled in a known transponder on
the tuning screen (Note that I don't have any transponders defined under
Advanced options on the Channel Editor screen because the tuning screen
allows me to set these parameters as well and having one didn't make a
difference). These are the tuning parameters:
Frequency: 11597000000
Symbol rate: 22000
Inversion: auto
FEC: 5/6
Polarity: Vertical
It then tries to find channels, but after a short period I get the
following error message:
"Error tuning to transport".
However, the Signal strength and the Signal/noise bars were showing
(both around 60/70%).
Here is the output from lsmod:
Module Size Used by
dvb_ttpci 90036 0
dvb_core 78204 1 dvb_ttpci
l64781 7300 1 dvb_ttpci
saa7146_vv 46272 1 dvb_ttpci
video_buf 19460 1 saa7146_vv
saa7146 15560 2 dvb_ttpci,saa7146_vv
v4l1_compat 12036 1 saa7146_vv
v4l2_common 6528 1 saa7146_vv
videodev 9280 1 saa7146_vv
ves1820 5828 1 dvb_ttpci
stv0299 11464 1 dvb_ttpci
tda8083 5572 1 dvb_ttpci
stv0297 7936 1 dvb_ttpci
sp8870 7052 1 dvb_ttpci
firmware_class 8704 2 dvb_ttpci,sp8870
ves1x93 6404 1 dvb_ttpci
ttpci_eeprom 2432 1 dvb_ttpci
cx24110 7812 0
fglrx 277808 7
ftdi_sio 39364 1
usbserial 27888 3 ftdi_sio
8139too 21632 0
mii 5184 1 8139too
And the dmesg output after the modules loaded:
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 169
saa7146: found saa7146 @ mem ffffc20000002000 (revision 1, irq 169)
(0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:24:07:8e
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068,
app 8000261d
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
dvb-ttpci: found av7110-0.
Excuses for the lenghty message, I hope someone can help me tuning the
channels.
Kind regards,
Nes
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users