On Sat, 2005-05-07 at 19:54 +1000, Phill Edwards wrote:
So I'm assuming that from a o/s perspective the card is working, but
for some reason myththv cant find it. The permissions on the device
files are as follows:
[~/.mythtv]$ ls -l /dev/dvb/adapter0/
crw-rw-rw- 1 root mythtv 212, 4 May
So I'm assuming that from a o/s perspective the card is working, but
for some reason myththv cant find it. The permissions on the device
files are as follows:
[~/.mythtv]$ ls -l /dev/dvb/adapter0/
crw-rw-rw- 1 root mythtv 212, 4 May 7 16:57 demux0
crw-rw-rw- 1 root mythtv 212, 5
I just joined the list so I don't have all the entire thread to this
conversation but it seems like you are trying to recompile/update the
kernel
with some kernel modules. Are you doing a recompile of the kernel from
vanilla source or just using FC3s update mechanism?
Hi Andy, thanks for
Do you have to enter any lines into modprobe.conf (or modules.conf
depending on your distro)? when I installed the card I found that some
drivers had been loaded even though I hadn't added anything to
modprobe.conf. Would you mind sharing your's so I can see what (if
anything) is
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, May 05, 2005 11:46
To: Discussion about mythtv
Subject: Re: [mythtv-users] Setting up a DVB Card
On Tue, 03 May 2005 10:36:38 +0100, Nigel Metheringham
[EMAIL PROTECTED] said:
Actually
On Thu, 2005-05-05 at 20:45 +0200,
[EMAIL PROTECTED] wrote:
Having read your post, I ran all the packages above (only the last three
actually updated anything, somehow I'd already got the first two) then
did 'make' and 'insmod'[2][3] of dvb-kernel (again!) but I still can't
see any 'DVB:'
Actually what I use is the FC3/update kernel (2.6.11-1.14_FC3) with the
following additional packages:-
* bttv-kmdl-2.6.11-1.14_FC3
* video4linux-kmdl-2.6.11-1.14_FC3
* ivtv-kmdl-2.6.11-1.14_FC3
* saa7134-kmdl-2.6.11-1.14_FC3
* cx88-kmdl-2.6.11-1.14_FC3
You may
On Fri, 2005-05-06 at 18:29 +1000, Phill Edwards wrote:
Do you have to enter any lines into modprobe.conf (or modules.conf
depending on your distro)? when I installed the card I found that some
drivers had been loaded even though I hadn't added anything to
modprobe.conf. Would you mind sharing
On Tue, 03 May 2005 10:36:38 +0100, Nigel Metheringham
[EMAIL PROTECTED] said:
Actually what I use is the FC3/update kernel (2.6.11-1.14_FC3) with the
following additional packages:-
* bttv-kmdl-2.6.11-1.14_FC3
* video4linux-kmdl-2.6.11-1.14_FC3
*
I wouldn't waste too much time on these unless you discover you
actually need them. I got myth0.18 up and running on DVB fine (my
first myth install) without them.
Actually one thing from that archive that might be useful to some is the
dvbdate command, if you want to do time synchronisation
On Tue, 2005-05-03 at 19:18 +1000, Andrew Herron wrote:
The biggest thing in Jarod's guide that was wrong for me was the
kernel choice. I spent at least a day bashing my head against the
wall to work this stuff out, so here goes:
1) Instead of the _FC3 version listed in that guide, use the
I've just bought a KWorld Vstream Xpert PCI DVB-T card and have been
reading all about how to set it up. According to
http://www.ethics-gradient.net/myth/mythdvb.html I need to get hold of
some tools called scan and tzap which will help me test scanning and
tuning of channels before getting it to
I wouldn't waste too much time on these unless you discover you
actually need them. I got myth0.18 up and running on DVB fine (my
first myth install) without them.
OK, that's encouraging. Do you know any good step-by-step guides on
how to do this? It's diffierent to getting analogue cards up
13 matches
Mail list logo
