On 9/8/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
> Hello everyone!
>
> I have finally found the problem!
>
> I did a little experience: I enabled the AC97 soundcard in my
> motherboard and connected the output of the TV card to it instead of to
> the Audigy. No more crackling! However, I notice
Hello everyone!
I have finally found the problem!
I did a little experience: I enabled the AC97 soundcard in my
motherboard and connected the output of the TV card to it instead of to
the Audigy. No more crackling! However, I noticed the volume is way too
high! The TV card seems to be outputt
On Sat, 2005-09-03 at 02:57 -0400, Dewey Smolka wrote:
> Unfortunately, There's not much I can tell you. I can say that
> replacing the card with a PVR x50 (which doesn't use V4L) will
> probably get rid of your problem, but that means spending money.
> Others may be able to help more.
Hmmm I get
On 9/3/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
> Still, I don't see how v4l can be affecting the sound in MythTV, since
> MythTV only gets video from v4l...
I'm sugguesting it may be some combination of capture card and driver
because the capture card has to pass the audio through to the soun
Sorry,
I forgot to mention that I am using mythtv 0.18.1.20050510-1, installed
via Gentoo's portage (Gentoo calls this 0.18.1-r2). I imagine you would
all want to know that :-)
Michael
Michael Cowell wrote:
Hi all,
I am also experiencing a problem like this. I have the following setup:
A
Hi all,
I am also experiencing a problem like this. I have the following setup:
AMD Duron 1 GHz
384 MB SDRAM
Twinview DVB-T capture card
Pinnacle PCTV bt878 based capture card
SBLive! emu10k1 based audio card
Linux distro is Gentoo. Kernel version is 2.6.12-gentoo-r8. I am using
unpatched V4L.
Dewey Smolka wrote:
- video4linux CVS (due to some cx8800 problems with the release
version). --> shouldn't be the problem because of all the above reasons
H. This may be the problem, because the things you mention above
don't use V4L, at least not that I'm aware of.
Well, I real
David Ellis wrote:
Lower your volume level on the card setup in mythsetup.I think the
problem is with an input volume level that is too high.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sérgio Gomes
Sent: Friday, September 02, 2005 5:
Well, I can only say I never had any problems with crackling outside
MythTV, and I've used numerous players, and both OSS and ALSA...
---
Jay Jarvinen wrote:
On Fri, 02 Sep 2005 21:59:39 +0100
Sérgio Gomes <[EMAIL PROTECTED]> wrote:
Inside MythTV:
- The amount of crackling (or at least th
On 9/2/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
> Hello everyone!
>
> Now, I have been having a problem with audio on my MythTV since I
> installed it yesterday: I get a lot of crackling and popping in my
> recordings and in LiveTV. I've been running several tests.
>
> Inside MythTV:
> - The
Lower your volume level on the card setup in mythsetup.I think the
problem is with an input volume level that is too high.
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sérgio Gomes
Sent: Friday, September 02, 2005 5:00 PM
To: mythtv-users
On Fri, 02 Sep 2005 21:59:39 +0100
Sérgio Gomes <[EMAIL PROTECTED]> wrote:
> Inside MythTV:
> - The amount of crackling (or at least the loudness) goes up with the
> loudness of the broadcast; if it's quiet there's almost no crackling,
> but if there are a lot of people talking or loud sounds, t
Nick wrote:
On 02/09/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
Hello everyone!
I'm probably one of the very few people left with a non-PVR analog card
(a simple Hauppauge WinTV Go, based on cx8800). The audio goes from the
TV card to the sound card via a simple external stereo cable, as I
On 02/09/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote:
> Hello everyone!
>
> I'm probably one of the very few people left with a non-PVR analog card
> (a simple Hauppauge WinTV Go, based on cx8800). The audio goes from the
> TV card to the sound card via a simple external stereo cable, as I'm
> sure
14 matches
Mail list logo