On 07/12/05, John DiLorenzo <[EMAIL PROTECTED]> wrote:
> Well, no luck.
>
> I'm going to try to rebuild mythtv from the tarball and see what I get.
>
> FYI, the LIRCD service is DOA before I use it, it seems to need the
> modprobe lirc_i2c before it will do anything.
>
> lircrc and lircd.conf fi
John DiLorenzo wrote:
> Which version of LIRC are you running Roy?
I checked mine out of CVS, so it claims to be 0.8.0, but it's really a
pre-release. The problem I encounted was that the current stable version
(0.7.2) won't work with newer kernels (>2.6.13) because of some changes in
the kernel s
Which version of LIRC are you running Roy?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
John DiLorenzo wrote:
> FYI, the LIRCD service is DOA before I use it, it seems to need the
> modprobe
> lirc_i2c before it will do anything.
Do you have i2c support in your kernel?
Device Drivers -> I2C support -> <*> I2C support
Device Drivers -> I2C support -> <*> I2C device interface
The abo
Well, no luck.
I'm going to try to rebuild mythtv from the tarball and see what I get.
FYI, the LIRCD service is DOA before I use it, it seems to need the modprobe lirc_i2c before it will do anything.
lircrc and lircd.conf files look good. I removed all the lircrc
files but /etc/.lircrc I m
OK, tonight I'll try the following:
1. Figure out if LIRC is dead on startup, or if it's me running IRW that kills it. Then create a script to ensure LIRC runs properly on reboot.
2. Remove all copies of lircrc besides /etc/.lircrc.
3. Compare lircrc and lircd.conf to make sure the button
> I've got the same problem. I've searched the archives without much
> luck. The only thing that gets close is a guy who said fixed the
> issue by updating his lirc-kmdl file.
I'm that guy. I had the same issue after doing a dist-upgrade and
jarod instructed me to upgrade my lirc-kmdl. I did tha
On Mon, 5 Dec 2005 21:54:51 -0700, John DiLorenzo wrote:
>Hi Guys,
>I'm slowly fixing all the problems of my Myth setup, but I just can't figure
>out my LIRC problem...
>Here's the issue:
>LIRCD seems to run on startup, but IRW won't work and a /sbin/service lircd
>status comes back with "lircd
> Hi Guys,
>
> I'm slowly fixing all the problems of my Myth setup, but I just can't
> figure out my LIRC problem...
>
> Here's the issue:
>
> LIRCD seems to run on startup, but IRW won't work and a /sbin/service lircd
> status comes back with "lircd dead but subsys locked"
>
> If I do a /sbin/
John DiLorenzo wrote:
> I'm using the lircrc file for that remote listed on Jarod's page. It
> seems
> to be complete and in the correct places, including a .lircrc file located
> in the MYTHTV user's home folder.
Using a ~/.lircrc file leads one to believe that you didn't compile lirc
as an opti
10 matches
Mail list logo