Hi,
I have check_cluster2 configured correctly so that if not enough service checks are OK state I get alerts and critical status. What I would like to do is make sure that there are not too many active service check responses at the same time but am unclear how to do this.
Desired state: 1 OK
On Tue, 29 Nov 2005, Brian Roy wrote:
Hello,
I would like to extend our Nagios installation to replace our alert system
on our AS/400. Currently the AS/400 sends out pages to individual phones
based on events. The body of those pages would have pertinent information to
the event. What I would l
Hello,
I would like to extend our Nagios installation to replace our alert system on our AS/400. Currently the AS/400 sends out pages to individual phones based on events. The body of those pages would have pertinent information to the event. What I would like to do is have the AS/400 trigger a s
Hi Joe,
These numbers are strange - 1599%??
What is the check command that you are using?
Can you check the load some other way to make sure nagios is reporting
correctly?
Here we use a check command for checking the load by ssh that is:
# 'check_load_by_ssh' command definition
define comman
I didn't say leave them out. I said create a new contact group. Call it
'none'.
(maybe 'none' is a reserved word? call it 'whatever').
Use notification periods or use a dummy notification command or any number
of ways to make that contact supress normal notifications.
Normal notifications wi
I'm properly logged in as my username.. I don't have a default user
specified, so it's not that causing the issue. I also had the same
issue historically under 1.x also. I'm guessing it's a peculiarity of
my config, but it seems to me like it would more likely be determined in
the cgi's the
The timeout option will be listed in the plugin's help page.
Run from command line:
check_http (-h | --help)
HINT: This option works on most of the other plugins as well.
-Original Message-
From: Randy Paries [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 29, 2005 8:16 AM
To: nagio
> -Original Message-
> From: Joe Rhett [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, November 29, 2005 2:21 PM
> To: Marc Powell
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] want acknowledgement alerts to email
> acknowledgement note
>
> On Tue, Nov 29, 2005 at 11:
Hi,
You must have an old version of the script (version 1.1), you can either use
it with the "-L" option, or download the latest version
(http://www.manubulon.com/nagios/check_snmp_load.pl) and try again.
BTW, when you ask for the load (-T netsl), you must put 3 warning and
critical levels (one f
Hello all:
Joshua Coombs and Steve Shipway were discusing an issue with
a properly running pluging returning the error in the subject line.
I am seeing this same problem on a Centos 4 box running a plugin
written in java. On the nagios plugin mailing list:
Von Toon said:
>On 15 Nov 2005, at 15:0
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Eli Stair
> Sent: Tuesday, November 29, 2005 1:36 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Mapping "Author" to auth name in CGI commands?
>
>
> Is there any
On Tue, Nov 29, 2005 at 11:05:19AM -0600, Marc Powell wrote:
> Presumably you're using nagios 2.x. $OUTPUT$ was the 1.x equivalent of
> $SERVICEOUTPUT$. You want $SERVICEACKCOMMENT$.
>
> http://nagios.sourceforge.net/docs/2_0/macros.html
Hm -- this is not an improvement. This now guarantees tha
On Tue, 29 Nov 2005, Eli Stair wrote:
>
> And additionally, this release is not sending alerts at all as the config is
> doing in 2.0b3. The logs report the host down, but the alert and contact
> rules aren't being triggered. There are no errors to that effect however,
> either in nagios -v c
Is there any way to have the CGI change the default for "Author" from
Admin to the username that was used to authenticate access? This works
well in Zabbix, but maintaining accountability in Nagios relies on the user.
As is always the case, if it becomes too hard to do people get sloppy.
No
I've recently run into a strange issue with the Nagios WAP interface. I
am able to access the interface and log in fine, and also able to access
almost every page in this manner EXCEPT viewing a host. Any attempt to
view a host simply returns "Page Read Error".
This only occurs on my Sprint ph
Title: RE: [Nagios-users] Nagios HANGS scheduling info
Try enabling the orphaned service checks if you haven't already.
/eli
-Original Message-
From: [EMAIL PROTECTED] on behalf of Fernando Shayani
Sent: Tue 11/29/2005 6:17 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Matt Rae
> Sent: Monday, November 28, 2005 4:31 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] want acknowledgement alerts to email
> acknowledgement note
>
> I'd
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Danny Russell
> Sent: Monday, November 28, 2005 4:53 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] How to clear out old log info/data 2.0b4
>
> I am having a few
What exactly did you try ? Did you put the "-T netsl" or "-T netsc" switch
to tell the script the remote machine is Linux ?
i did yes
$ ./check_snmp_load.pl -H -C -w 3 -c 4 -T netsl
Unknown option: T
Can't find CPU usage information : UNKNOWN
Max wrote:
David Turner wrote:
It is working great on my network. What devices are you polling with it?
I'm polling a Cisco Pix 515e firewall. I can snmpwalk and get all the
paths that the MIB's point to in that script, so I know that's not an
issue either.
I know it's rude to reply to
Hi,
It does work for me at least (and considering the downloads and feedbacks
for this script, for some other people too).
What exactly did you try ? Did you put the "-T netsl" or "-T netsc" switch
to tell the script the remote machine is Linux ?
Patrick
-Message d'origine-
De : Tom Bro
check_http --help shows you can specify a -t to set that.
Todd
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Randy Paries
Sent: Tuesday, November 29, 2005 11:16 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] how can i change the tim
hello,
i have a remove nagios box that i get a lot of false messages.
I need to change the timeout value for check_http
i have changed the ping timeouts with args, but does not appear to be
any for check_http
Thanks for any help
---
This SF.
Joseph,
I got GCC installed as you suggested and I'm getting an error on libm which
I'm not sure where to get this library from. Is there an AIX version I need
to get?
I also installed the other required pkgs from this same CD and I have
/usr/bin in my path first so the original installations of
Hi all,
As I know, there is a restriction in Nagios, for a check-script return
message (255 characters).
Can I change it, to a greater one (for example: 512 or 1024 characters).
The Best,
Artashes.
---
This SF.net email is sponsored by: Splu
http://www.manubulon.com/nagios/snmp_load.html
this does not appear to work on linux
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
search
If I leave out a contact group for every host and service and just
specify escalations, Nagios will fill my logs with warnings about it.
Isn't there a better way?
Jeff
On 11/23/05, Tedman Eng <[EMAIL PROTECTED]> wrote:
> Think of service escalations as "in addition to" normal notifications
>
> F
Hello all,
I received this from my nagios server
and I'm trying to understand what it means. Can someone please help
me diagnose this or point me to docuementation that will describe what
the "85, 90, 85, 90, 85, 90, 15" means below... also, I'm tring
to find out why the percentages are so high.
> -Original Message-
> Sounds like you mixed a manual build/install with a packaged version.
I
> suggest you make sure these sort of conflicts are resolved by checking
if
> you start with the right nagios.cfg file to begin with.
>
> Hugo.
It turns out that I had copied over a resource.c
A lot of times (1 or
2 times a week!) Nagios stops checking the services. Then I go to SCHEDULING
QUEUE and noticed that are tests scheduled to check but it didn't run. Tests
that usually runs fine, but sometimes, different tests doesn't run. Then I have
to RESTART nagios to fix it.
Does a
Hello
Please have you ana nswer to the multiple icon problem ?On 5/5/05, Miguel A. Torres <[EMAIL PROTECTED]
> wrote:
Hello all,
I use serviceextinfo feature to asociate a link to a service. Now I need asociate another link more to the same service.
I test adding another "url notes" di
Hello all,
I am running nagios version 2.0b5 and the serviceextinfo doesn't work like I would.
Here my servicextinfo.cfg
define serviceextinfo{
host_name diplodocus
service_description check-host-alive
notes_url /nagios/admin.html?hostname=diplodocus
At 13:15 29/11/2005, Soumya Nambiar wrote:
For viewing the content of statuswrl.cgi you need a plugin called corona
or something.(dont remember the name).
Or any other VRML plugin (google is our friend :))
---
This SF.net email is sponso
Hi,These cgi files will be missing if you do not
have gd library installedand the corresponding libraries associated with it.
A detailed explanationis given in the FAQ abt the libraries needed. After
installing thepackages required compile nagios again.For viewing the
content of statuswrl.cg
thanks Soumna.
then its good to check FAQs.
bye
hi all.
i have been using nagios for some time.
*
first question :
some *.cgi files missing.
i installed stable version which is nagios1.3 but there is no statusmap.cgi nor trends.cgi and also no histogram.cgi.
i wonder if they will work when i just copy these files from another version of nagio
Thanks for your quick answer,
Effectively my vmware-snmpd was not started only snmpd was,
i went to http GUI and enabled VMware SNMP SubAgent and all is ok now ..
Regards,
Emmanuel
2005/11/28, Steve Shipway <[EMAIL PROTECTED]>:
> >I get unfortunaly for all my queries:
> >Error: Unable to retrie
Title: RE: [Nagios-users] 2.0b5 initial host/service checks delayed after start (not present in 2.0b3)
And additionally, this release is not sending alerts at all as the config is doing in 2.0b3. The logs report the host down, but the alert and contact rules aren't being triggered. There a
38 matches
Mail list logo