On Mon, Jan 15, 2007 at 06:09:13PM +0100, Daniel wrote:
>/---node3--node4
> Nagios---Router
>\---node1--node2
>
>
>
> So, when nagios see that the touter is offline they dont need to alert
> that alle nodes are offline becaus i know that all nodes must be
> offli
Dmitriy Kirhlarov wrote:
> On Mon, Jan 15, 2007 at 07:56:47AM +0300, [EMAIL PROTECTED] wrote:
>
>
>> Hallo thanks so much for your time.However the command is still timing out
>> and giving me the same error.Here is my command definition in the hosts
>>
>
> 1. Try to run command manualy.
>
On Mon, Jan 15, 2007 at 07:56:47AM +0300, [EMAIL PROTECTED] wrote:
> Hallo thanks so much for your time.However the command is still timing out
> and giving me the same error.Here is my command definition in the hosts
1. Try to run command manualy.
2. Check your host with "ping" command. Host ali
Formoso, Travis wrote:
> Ok here are my config files:
>
> [...snip]
>
All right... beat this into the command line, all on one line:
/usr/bin/printf "%b" "* Nagios 2.6 *\n\nNotification Type: TEST \nHost:
PRETENDIEXIST \nState: DENIAL \nAddress: 192.168.1.1\nInfo: Wuznme
boss\n\nDate
Ok here are my config files:
Config: # 'tformoso' contact definition
define contact{
contact_name tformoso
alias nagios admin
service_notification_period24x7
host_notification_period 24x7
service_notification_options w,u,c,r
host_notif
Formoso, Travis wrote:
>
> Hey guys
>
>
>
> I had a service go into warning tonight and I did not receive and
> email. I have notification interval at 120, period 24x7, options w,u,c,r
>
>
>
> I went in and changed commands.cfg to mailq because in my /bin it is
> mailq and not mailx..
>
>
>
Formoso, Travis wrote:
>
> Hey guys
>
>
>
> I had a service go into warning tonight and I did not receive and
> email. I have notification interval at 120, period 24x7, options w,u,c,r
>
>
>
> I went in and changed commands.cfg to mailq because in my /bin it is
> mailq and not mailx..
>
>
>
Hey guys
I had a service go into warning tonight and I did not receive and email.
I have notification interval at 120, period 24x7, options w,u,c,r
I went in and changed commands.cfg to mailq because in my /bin it is
mailq and not mailx..
I configured the other files with my name and em
On 16 Jan 2007 at 2:06, Arno Lehmann wrote:
> Hi,
>
> On 1/16/2007 1:26 AM, Dan Langille wrote:
> > On 16 Jan 2007 at 1:12, Arno Lehmann wrote:
> >
> >
> >>Hi,
> >>
> >>On 1/16/2007 12:40 AM, Dan Langille wrote:
> >>
> >>>On 15 Jan 2007 at 18:08, Dan Langille wrote:
> >>>
> >>>
> >>>
> Hi f
Hi,
On 1/16/2007 1:26 AM, Dan Langille wrote:
> On 16 Jan 2007 at 1:12, Arno Lehmann wrote:
>
>
>>Hi,
>>
>>On 1/16/2007 12:40 AM, Dan Langille wrote:
>>
>>>On 15 Jan 2007 at 18:08, Dan Langille wrote:
>>>
>>>
>>>
Hi folks,
I'm using nrpe 1.9 on FreeBSD 6.x and I'm failing to get a r
On 16 Jan 2007 at 1:12, Arno Lehmann wrote:
> Hi,
>
> On 1/16/2007 12:40 AM, Dan Langille wrote:
> > On 15 Jan 2007 at 18:08, Dan Langille wrote:
> >
> >
> >>Hi folks,
> >>
> >>I'm using nrpe 1.9 on FreeBSD 6.x and I'm failing to get a remote
> >>script to work. It seems that no perl script w
Hi,
On 1/16/2007 12:40 AM, Dan Langille wrote:
> On 15 Jan 2007 at 18:08, Dan Langille wrote:
>
>
>>Hi folks,
>>
>>I'm using nrpe 1.9 on FreeBSD 6.x and I'm failing to get a remote
>>script to work. It seems that no perl script works, but I can get
>>compiled plug-ins to work.
...
> My thanks
> What does the definition starting on line 2 of
> /etc/nagios/hostgroups.cfg look like? That's what nagios is complaining
> about and it's a unique configuration that you've created. I would guess
> that you've included '(username)' on the members line as if it were a
> host. You shouldn't. Only h
On 15 Jan 2007 at 18:08, Dan Langille wrote:
> Hi folks,
>
> I'm using nrpe 1.9 on FreeBSD 6.x and I'm failing to get a remote
> script to work. It seems that no perl script works, but I can get
> compiled plug-ins to work.
>
> The result is, which invoked on the nagios server is:
>
> $ ./ch
What does the nrpe.cfg definition for your 'check_raid_dell' command
look like?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dan
Langille
Sent: Monday, January 15, 2007 4:09 PM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] NRPE: Unable
The client is sending None&2&5 which is correct for a 5-min CPU average
request with the default password.
If you have modified the password on the pnsclient agent then this may
be the cause (this is done in the registry). Alternatively check your
check_nt program as it may be more recent and no
Hi folks,
I'm using nrpe 1.9 on FreeBSD 6.x and I'm failing to get a remote
script to work. It seems that no perl script works, but I can get
compiled plug-ins to work.
The result is, which invoked on the nagios server is:
$ ./check_nrpe -H app09 -c check_raid_dell
NRPE: Unable to read output
Hi,
I'm building a website which will be hosted on a paid-hosting provider.
I'd like to be able to click on a link that will send acknowledgments
and comments in to a Nagios server running on a corporate LAN. So,
there's a firewall between the hosted website and the Nagios site, with
Nagios able t
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Formoso, Travis
> Sent: Monday, January 15, 2007 2:04 PM
> To: nagios-users
> Subject: [Nagios-users] Question about hosts when setting up
>
> Hello,
>
>
>
> I have setup monitoring o
Check if you are enabled to do that in cgi.cfg:
authorized_for_system_information=nagiosadmin
authorized_for_configuration_information=nagiosadmin
authorized_for_system_commands=nagiosadmin
authorized_for_all_services=nagiosadmin
authorized_for_all_hosts=nagiosadmin
authorized_for_all_service_comm
> [EMAIL PROTECTED] wrote:
>>> Don't forget to copy the mailing list in so others can chip in and
>>> help.
>>>
> Read the above line again!!
>> HI Andy am kinda confused here: when you say i insert the values
>> "2000,25%" to the $ARG1$ and $ARG2$ respectively do you mean that i
>> should
>> inser
[EMAIL PROTECTED] wrote:
>> Don't forget to copy the mailing list in so others can chip in and help.
>>
Read the above line again!!
> HI Andy am kinda confused here: when you say i insert the values
> "2000,25%" to the $ARG1$ and $ARG2$ respectively do you mean that i should
> insert them in t
Hello,
I have setup monitoring on our companies website and when I check to see
if it will run correctly I get this message.
Error: Could not find any host matching ‘(username)’
Error: Could not expand member hosts specified in hostgroup (config file
‘/etc/nagios/hostgroups.cfg’, starting
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Nedim Bicic
> Sent: Sunday, January 14, 2007 11:04 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Email notifications cont.
>
> I am using Nagios 2.4
>
> I can no
I am using Nagios 2.4
I can not get email notifications when my system is timing out but when i
check the event log on nagios i see the log:
"
[image: Service Warning][01-14-2007 23:47:16] SERVICE ALERT:
nedo;PING;WARNING;HARD;4;PING WARNING - Packet loss = 0%, RTA = 135.06 ms
[image: Service War
Marc,
You hit it right on the head. The problem was with the wrong httpd user
assigned to the nagcmd group. I followed the instructions in the
following link:
http://nagios.sourceforge.net/docs/2_0/commandfile.html
Did everything correct except for assigning "nobody" to nagcmd instead
of 'apac
if I was going to do that I would just use check_tcp...
-h
Hari Sekhon
Saulo Silva wrote:
Hi,
Do you try just to create a script with telnet in the rdp port ?? I
believe that is the easiest way .
Best Regards ,
Saulo Augusto Silva
==
RHCE - LPI Professio
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Daniel
> Sent: Monday, January 15, 2007 11:09 AM
> To: Nagios Users mailinglist
> Subject: [Nagios-users] addicted from other hosts
>
> Hi all,
>
> is there any way to make some addicte
Attached.
-Original Message-
From: Antoine Musso [mailto:[EMAIL PROTECTED]
Sent: Monday, January 15, 2007 10:33 AM
To: Aaron Segura
Subject: Re: [Nagios-users] Patch for NRPE
Aaron Segura a écrit :
> While attempting to compile NRPE (v2.6 / 12/11/2006) with the DEBUG
> option today I th
If I understand your question correctly you should just have to set the
parent/child relationships accordingly.
Chuck
Charles L. Mills
Senior Network Engineer
Access Data Corporation
90 Beta Drive
Pittsburgh, PA 15238
(412) 968-4024
[EMAIL PROTECTED]
Managed Hosting, Colocation and Disaster Recov
Marc Powell wrote:
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:nagios-users-
>> [EMAIL PROTECTED] On Behalf Of Artyom Khmelnitsky
>> Sent: Monday, January 15, 2007 9:52 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] Upgrading to latest
>>
>> Hello,
Hi all,
is there any way to make some addicted between hosts?
Here my solution:
/---node3--node4
Nagios---Router
\---node1--node2
So, when nagios see that the touter is offline they dont need to alert
that alle nodes are offline becaus i know that all nodes mu
While attempting to compile NRPE (v2.6 / 12/11/2006) with the DEBUG
option today I think I found a small error in the code and have included
a patch to fix it.
This is for nrpe.c
1053,1056c1053,1056
< fp=fopen("/tmp/packet","w");
< if(fp){
< fwrite(&receive_pack
Hi!
On Mon, Jan 15, 2007 at 12:56:01PM +0100, Daniel wrote:
> i have some questions about nagios 2.6 and config issue's.
>
> First, i want to know if it is possible to say:
>
> "alert me every X minutes" when the down status isn't changed to up.
> I makes me nervouse to get every 10 minutes a s
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Artyom Khmelnitsky
> Sent: Monday, January 15, 2007 9:52 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Upgrading to latest
>
> Hello,
>
> One other question I ha
Hello,
One other question I have is regarding the whole upgrading process. We
currently run 2.0, but want to upgrade to 2.6. We do nightly backups, but does
anything get overwritten that we would need to reconfigure again, such as the
.cfg files, the web interface, icons, etc..? Or do we just u
On Mon, 15 Jan 2007, Hari Sekhon wrote:
The other question being, is there some in-band error sent that's easily
parseable when a terminal server has exceeded its number of allowed logins
(I'd treat this as a WARN, not a CRIT), without having to parse and
screen-scrape the screen image for that
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of nagios
> Sent: Monday, January 15, 2007 9:07 AM
> To: Stijn Gruwier
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Using external commands with web interface
>
>
Stijn and Marc, thanks for your help. I'll check the below ideas but I'm
pretty sure it's setup already. I'll also take a look at the links. I
checked out the documentation and that did not fix the problem. I added
the group, user, setup the permissions. My nagios.cmd file was made by
Nagios. I
Guten Tag Marc Powell,
am Montag, 15. Januar 2007 um 15:59 schrieben Sie:
> Please always respond on list so that others may benefit from your
> experience. That's part of the OSS credo ;)
Sry, i thought i have doese that hehe...
I pushed the wrng button ;)
>> > --
>> # 'check_ping' command def
Please always respond on list so that others may benefit from your
experience. That's part of the OSS credo ;)
> -Original Message-
> From: Daniel [mailto:[EMAIL PROTECTED]
> Sent: Monday, January 15, 2007 8:45 AM
> To: Marc Powell
> Subject: Re[2]: [Nagios-users] Some spezial nagios 2.6 q
Hi all .
I installed NsClient (2.0.1) on a Windows 2000 server. It is working fine,
but if I want to check CPULOAD I will read following error message:
NSClient - ERROR:Malformed request or internal error. Check
EventLog:None&2&5
Nagios server is a 1.4 version
Have you got any idea?
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Daniel
> Sent: Monday, January 15, 2007 5:56 AM
> To: Nagios Users mailinglist
> Subject: [Nagios-users] Some spezial nagios 2.6 questions
>
> Hi all,
>
> i have some questions about na
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Artyom Khmelnitsky
> Sent: Sunday, January 14, 2007 9:19 PM
> To: nagios-users@lists.sourceforge.net; [EMAIL PROTECTED]
> Subject: [Nagios-users] Using external commands with web interfac
Hi all,
i have some questions about nagios 2.6 and config issue's.
First, i want to know if it is possible to say:
"alert me every X minutes" when the down status isn't changed to up.
I makes me nervouse to get every 10 minutes a sms where i can see
"Host is down"... its enough when i see it eve
If I wanted to test just the port I'd use check_tcp.
I'd like to check that it can properly talk to rdp if I can. For
example, I also use vnc, so I wrote a bash script around vncsnapshot to
form a valid plugin to send creds and then pull the screen from the
machine. Only if it pulled successful
46 matches
Mail list logo