I dont have any passowrd in my nt.cfg file for the check_nt command..
Here is my config file:
# If you are confused about this command definition, cause you was
# reading other suggestions, please have a look into
# /usr/share/doc/nagios-plugins/README.Debian
# 'check_nt' command definition
defi
Thanks, I will check that right away.
Cheers.
-Original Message-
From: Greg Pangrazio [mailto:pangr...@gmail.com]
Sent: 30 November 2010 11:20
To: Nagios Users List
Subject: Re: [Nagios-users] nsclient wrong password
If you are using the standard Ubuntu apt-get install the comand
defin
Andreas,
Thanks for your reply to my earlier message. I've done some testing and some
more thinking on this since then:
On 11/23/2010 03:50 AM, Andreas Ericsson wrote:
> On 11/22/2010 10:41 PM, Paul M. Dubuc wrote:
>> We're using Nagios 3.2.3 for simulation of monitoring load in a load test
>>
If you are using the standard Ubuntu apt-get install the comand
definitions are located in /etc/nagios-plugins/config you can modifiy
the check_nt command from there in the nt.cfg file
Greg Pangrazio
On Tue, Nov 30, 2010 at 8:56 AM, Maxime Alarie wrote:
>
>
>
>
> From: trm asn [mailto:trm.nag
I am running a homemade check to check about 8 core processes. Occasionally
the check times out after 10 seconds.
All this check does is run /etc/init.d/ status and use either the 0 or 1
exit code to report that the process is OK or Critical.
I verified in my nagios.cfg file the timeoout
From: trm asn [mailto:trm.nag...@gmail.com]
Sent: 29 November 2010 10:48
To: Nagios Users List
Subject: Re: [Nagios-users] nsclient wrong password
On Mon, Nov 29, 2010 at 8:28 PM, Maxime Alarie
wrote:
From: trm asn [mailto:trm.nag...@gmail.com]
Sent: 27 November 2010 05:20
To: Na
Hello, I have some VMS servers that I have implemented SNMP service on. I
am able to successfully do an snmpwalk from my Nagios server. However my
SNMP plugin is looking for a MIB that is apparently different than the one
that these VMS servers use.
Question: how do I find the MIB value for thes