Hi Marco, have you added your username to the multisite.mk? You need a new
permission to access the multisite webpage
Jake
On Thu, Jun 14, 2012 at 2:13 AM, Marco Borsani wrote:
> ** **
>
> ** **
>
> Hi all
>
> ** **
>
> I am testing check_mk.
>
> Inst
Also, you might want to find out the performance of your service checks.
The nagios profiler is a very good tool to find execution time of
individual services.
http://exchange.nagios.org/directory/Plugins/Network-and-Systems-Management/Nagios/Profiler-to-check-plugin-execution-time/details
On Mo
Thank you Holger. That fixes a red light for me!
On Thu, Jun 7, 2012 at 11:21 PM, Cosmin Neagu wrote:
> You were right. It need to be told to use ipv4 with -4 switch.
> Thanks
>
> Cosmin Neagu
> NOC Team Leader
> Str. I. G. Duca nr. 36
> Otopeni, Judetul Ilfov, 075100 Romania
> www.omnilogic
In the HOSTNAME variable, you might want to use the ip of the IMM instead
of the ip of the host. IBM server itself doesn't support this IMM check.
You should be running the check against the IBM IMM device.
Jake
On Fri, Jun 1, 2012 at 1:56 AM, Giles Coochey wrote:
> On 01/06/20
Simon, have you tried enabling the use_large_installation_tweaks=1 option
in nagios.cfg?
Enabling that option helps me eliminate the check latency but increases the
load on cpu significantly.
You may want to give that a try.
Jake
On Wed, May 23, 2012 at 2:52 AM, Simone Felici wrote:
>
I've just turned on this use_large_installation_tweaks option today. It
reduces the check latency significantly. Other than that, not so much.
I had tried using mod_gearman as well. It's a very nice addition to
distribute loads to other servers, but I had a hard time doing
configuration, deciding
grating to Multisite might minimize the number of files a little bit, but
a single huge main.mk file is not much easier to maintain.
I know that some of you have large and multiple Nagios environments setup
as well.
It would be nice to see some of you share how you manage the servers
systematically.
Th
ke Multisite.
Thanks for all the response!
Jake
On Tue, Jan 10, 2012 at 1:18 AM, Andreas Ericsson wrote:
> On 01/09/2012 08:53 PM, Jake Xu wrote:
> > Hi everyone,
> >
> >> From time to time, I need to restart or reschedule all services to
> verify
> > that some n
all
checkbox to select all checkboxes. It would be useful to have that on the
Nagios Core, but AFAIK there isn't any.
Thanks in advance,
Jake
--
Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't n
sf.net/sfu/www-ibm-com
> ___
> Nagios-users mailing list
> Nagios-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting
> any issue.
> ::
check_dell-hardware and check_hp-hardware
which were awfully slow prior to rewriting them (now available on
nagiosexchange.)
--
Jake Paulus
jakepau...@gmail.com
--
This SF.net email is sponsored by:
SourcFo
constant size so disk space isn't really a concern at all.
--
Jake Paulus
jakepau...@gmail.com
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wa
check on host2 if host 1 is down
> Only run service check on host3 if host1 and host2 is down
>
> Can this be done via nagios?
>
> Thanks,
> Mahmoud
>
>
I don't know your situation but you may accomplish what you really want by
using check_
agios.manubulon.com/snmp_int.html
--
Jake Paulus
jakepau...@gmail.com
--
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about anything Open Source.
in conjunction with your normal plugin logic
may accomplish what you're trying to do.
--
Jake Paulus
jakepau...@gmail.com
(sorry for the re-send Matt, i forgot to reply-all.)
--
of logs
without too much overhead (like the Nagios avail.cgi does...)
-Jake
From: Jonah Horowitz [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 03, 2008 6:46 PM
To: nagios-users@lists.sourceforge.net
Subject: SPAM: :[Nagios-users] Checking for Apache
/nagios.manubulon.com/snmp_int.html
<http://nagios.manubulon.com/snmp_int.html> to avoid complicating your
Nagios config any more than you have to.
-Jake
-
This SF.Net email is sponsored by the Moblin Your Move Deve
gardless of who supports them) I don't want to have different service
>names between servers.
Tim:
You can define the same service on different hostgroups without a
problem...just make sure the hostgroups' members don't overlap.
-Jake
define hostgroup{
hostgroup_name gro
ort 5222 [http://etherx.jabber.org/streams"; xmlns="jabber:client"
from="sheldrick.co.uk" id="999b48cc"
xml:lang="en">]|time=0.328587s;3.00;5.00;0.00;10.00
You may wish to adjust warning and critical thresholds to your liking.
Thanks, -Jake
Hey Steve:
I don't know if it will work or not but you could try escaping the
semicolon.
E.g.
://nagios.my.domain/drraw/drraw.cgi?Mode=view\;Graph=1226789709.8592
-Jake
-Original Message-
From: Steve Burton [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 15, 2008 10:15
Don't forget that the directory you specify for the RRD files to go must
be writable by the user you run Nagios as.
Thanks, -Jake
239-949-4450 x6628
From: Novin Jaiswal [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2008 1:59 PM
To: nagios-users@lists.sourceforge.net
Su
Not to be rude...but
http://www.google.com/search?q=nagiosgraph
Thanks, -Jake
From: Novin Jaiswal [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2008 11:18 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Need Nagiosgraph tutorial/Help Link
Hi Friends
to decide whether the cost/benefit ratio hits the sweet
spot for the project to get onto my to-do list.
One note:
Pat might find the following link useful to help finish the Files
section:
http://nagioswiki.com/wiki/index.php/Special:Upload
(consider help sent :-) )
Thanks, -Jake
Novin:
Nagios uses your system date/time unless you configure the timezone
option in nagios.cfg. Take a look at
http://nagios.sourceforge.net/docs/3_0/configmain.html and search for "
Timezone Option."
Thanks, -Jake
239-949-4450 x6628
From: Novin Jaiswal [mailto:[EMAIL PROTEC
Alternatively, you can use check_snmp_process.pl if you prefer SNMP over
some other agent.
Thanks, -Jake
239-949-4450 x6628
-Original Message-
From: Izz Abdullah [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 05, 2008 2:38 AM
To: Chris Lee; nagios-users@lists.sourceforge.net
g too long.
Thanks, -Jake
-Original Message-
From: Edgar Matzinger [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 04, 2008 1:56 PM
To: Nagios Mailinglist
Subject: [Nagios-users] Any numbers on sizing a nagios server?
LS,
I've searched the internet (maybe I look in the wrong pla
Just use the "register 0" to hide the hostgroup from the CGI's. The
group will still be used in service definitions, etc. by the Nagios
daemon. (this seems to be an undocumented feature and I haven't actually
tested it in Nagios 3 but I used it in Nagios 2.11.)
-Jake
-
the IP stack on the host saw
errors it could retry right away on it's own even though the packet
might have been ok? Just an idea...
-Jake
-Original Message-
From: Paul Weaver [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 27, 2008 9:00 AM
To: Paulus, Jake; Nagios Users Mailing
s are hiding this) it causes to users and so have
chosen to take no action.
-Jake
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Weaver
Sent: Wednesday, August 27, 2008 8:38 AM
To: Nagios Users Mailinglist
Subject: Re: [Nagios-users] (Nagios-Ping)
>
Is there a different plugin similar to check_smartmon I can try that works
with check_nrpe ?
thanks in advanced.
On Tue, Aug 12, 2008 at 3:20 PM, Jake Solid <[EMAIL PROTECTED]> wrote:
> The following line will make all commands use sudo:
>
> command_prefix=/usr/bin/sudo
&
actly like nrpe does as the
> user nrpe is running as.
>
> As for your bolded question, go chmod 644 check_load and try to run
> it, it will give you the same error. It just means that the script
> executed but didn't respond with recognized output.
>
> On 8/12/08, Jake
d prepend /path/to/sudo
> before it execs smartctl.
>
>
>
> On 8/12/08, Jake Solid <[EMAIL PROTECTED]> wrote:
> > I'm trying to use check_nrpe with check_smartmon but I'm getting NRPE:
> > Unable to read output at the Nagios Server. *All other check plugins lik
I'm trying to use check_nrpe with check_smartmon but I'm getting NRPE:
Unable to read output at the Nagios Server. *All other check plugins like
check_load and check_procs work fine.
*
*I'm running the following command from my nagios server to the remote host:
*
*./check_nrpe -H remotehost.domain.
Good morning!
We do this by setting the retry_interval to 2 minutes and the max_retries to
10. This means that the service has to be in a non-OK state for 20 minutes
straight before it enters a "hard" status and starts alerting.
-Jake
-Original Message-
From: [EMAIL PROTECTE
i get no output. My smartctl -h
mentions that -A should showdevice SMART vendor-specific Attributes and
values.
Is there a patch for this plugin?
On Wed, Jul 30, 2008 at 4:14 PM, Jake Solid <[EMAIL PROTECTED]> wrote:
> I have tried all devices and still get the same error. This is the
The check_md_raid plugin which uses the mdadm program to get the status
of all the linux md arrays on the local machine provides the same
functionality as the check_smartmon plugin?
Thanks in advanced.
-
This SF.Net email is
gt;
> On Jul 30, 2008, at 9:25 AM, Jake Solid wrote:
>
> > Same error message. I tested using sdb1, sdb2, sdd1, sdb3 .
> >
> > Here is the output:
> >
> > [root@ proc]# more mdstat
> > Personalities : [raid1]
> > md2 : active raid1 sdb1[1] sda1[0]
>
&
t;
> On Jul 29, 2008, at 2:45 PM, Jake Solid wrote:
>
>> Using the devices doesnt work. Do I need a patch for thise plugin?
>>
>> [root@ ~]# pvscan
>> PV /dev/md3 VG VolGroup01 lvm2 [232.88 GB / 45.38 GB free]
>> PV /dev/md1 VG VolGroup00 lvm2 [215.19 GB
ssage-
>> From: [EMAIL PROTECTED] [mailto:nagios-users-
>> [EMAIL PROTECTED] On Behalf Of Jake Solid
>> Sent: Tuesday, July 29, 2008 12:52 PM
>> To: nagios-users@lists.sourceforge.net
>> Subject: Re: [Nagios-users] check_smartmon - IndexError: list index
> out
wrote:
>
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:nagios-users-
>> [EMAIL PROTECTED] On Behalf Of Jake Solid
>> Sent: Tuesday, July 29, 2008 11:49 AM
>> To: nagios-users@lists.sourceforge.net
>> Subject: [Nagios-users] check_smartmon - IndexError: l
Hello,
I'm testing the Nagios-Plugin check_smartmon that uses smartmontools.
I'm getting a IndexError: list index out of range. I made sure all
paths were correct.
Any inputs?
This the output when running the plugin:
[root@ plugins]# ./check_smartmon -d /dev/VolGroup00/LogVol00 -v 3
Get device
re release of Nagios if you're not willing to patch and
recompile.
-Jake
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of J.VC
Sent: Thursday, July 24, 2008 8:58 AM
To: nagios-users@lists.sourceforge.net
Subject: [Nagios-users] Nagios
If you're following the instructions found here
http://nagios.sourceforge.net/docs/3_0/quickstart-opensuse.html and
having trouble, can you please give specific error messages you're
seeing?
Thanks, -Jake
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Using NRPE, the check scripts (like check_ping, etc.) would be run on
"DUAL HOMES Machine" but kicked off by NAGIOS Host.
-Original Message-
From: Stan Brown [mailto:[EMAIL PROTECTED]
Sent: Sunday, July 20, 2008 11:17 AM
To: Paulus, Jake
Cc: nagios List; Stewart Flood
S
In Nagios 2 there is a limit to plugin output measured in Bytes (forget
the number) - it amounts to about 252 characters before the output is
truncated. Nagios 3 fixes this potential problem. I'm pretty sure the
original intent was as a security or performance precaution...but there
are definitely
you already use
elsewhere with NRPE to do what you need.
-Jake
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of stan
Sent: Sunday, July 20, 2008 10:29 AM
To: nagios List
Cc: Stewart Flood
Subject: [Nagios-users] Thoughts about a custom plugin
I have a number
about Flapping notification
On Mon, July 14, 2008 11:13 am, Paulus, Jake wrote:
> Yes - if a host is flapping, you won't be notified of each up/down.
The history graph shows "Indeterminate" around that time, could that be
the host was down after flapping?
>
>
>
> ---
Yes - if a host is flapping, you won't be notified of each up/down.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James
Sent: Monday, July 14, 2008 11:10 AM
To: Nagios-users@lists.sourceforge.net
Subject: [Nagios-users] (no subject)
If flapping is ena
are
inconsistent with each other and inaccurate when compared to "show mem"
on the system itself. Please see snmpwalk output below for more detail.
Please note: CPQHOST-MIB memory is documented as being measured in
megabytes.
Jake Paulus
Systems Engineer/Administrator
Source Interlink
Look for the "service_inter_check_delay_method" configuration option in
the documentation or in nagios.cfg (there are lots of comments). This
option is what controls how checks are spread out.
-Jake
From: [EMAIL PROTECTED]
[mailto:[EMAIL PRO
e to guess what it would be without being
> there.
> --
> Bob Sloane, University of Kansas Computer Center, Lawrence, KS, 66045
> Email:[EMAIL PROTECTED] http://www.ku.edu/home/sloane Phone:(785)864-0444
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[E
//www.ku.edu/home/sloane Phone:(785)864-0444
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jake
> Solid
> Sent: Friday, January 11, 2008 10:22 AM
> To: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] DISK U
kedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x2b4c0a5a2000
write(1, "DISK CRITICAL - free space: /vse"..., 124DISK CRITICAL - free
space: /vservers/fred/data 5798 MB (5% inode=99%);|
/vservers/fred/data=109009MB;96760;108855;0;120951
)
E-
> Hash: SHA1
>
> On 10/01/08 05:25 PM, Jake Solid wrote:
> > *I'm getting the following message when monitoring one of my disks from
> > my nagios server.*
> >
> > DISK UNKNOWN - free space:|
>
> Hi Jake,
>
> Can you tell me which version of chec
*I'm getting the following message when monitoring one of my disks from my
nagios server.*
DISK UNKNOWN - free space:|
*The following is my fstab configuration:*
/dev/VolGroup00/LogVol02 / ext3defaults1 1
/dev/md1/boot ext3d
Ok, I will go ahead and start a new thred with accurate information.
On Jan 10, 2008 4:56 PM, Jake Solid <[EMAIL PROTECTED]> wrote:
> When I make it:
>
> command[check_disk4]=/usr/lib64/nagios/plugins/check_disk -w 20% -c 10% -p
> /vservers/fred/data
>
> I get the same m
>
> *From:* [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] *On Behalf Of *Jake Solid
> *Sent:* Thursday, January 10, 2008 3:16 PM
>
> *To:* nagios-users@lists.sourceforge.net
> *Subject:* Re: [Nagios-users] DISK UNKNOWN
>
>
>
> Yes, its the real config.
>
%
/vservers/fred/data
On Jan 10, 2008 4:04 PM, Marc Powell <[EMAIL PROTECTED]> wrote:
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:nagios-users-
> > [EMAIL PROTECTED] On Behalf Of Jake Solid
> > Sent: Thursday, January 10, 2008 2:58 PM
> &
whatever a Spiderpig does! Can he swing, from
> a web? No he can't, he's a pig. Look out! He is a Spiderpig!!
>
>
>
> *From:* Jake Solid [mailto:[EMAIL PROTECTED]
> *Sent:* Thursday, January 10, 2008 3:58 PM
>
> *To:* nagios-users@lists.sourceforge.net
> *Subject:* Re:
<[EMAIL PROTECTED]> wrote:
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:nagios-users-
> > [EMAIL PROTECTED] On Behalf Of Jake Solid
> > Sent: Thursday, January 10, 2008 2:44 PM
> > To: nagios-users@lists.sourceforge.net
> > Subj
ED] [mailto:nagios-users-
> > [EMAIL PROTECTED] On Behalf Of Jake Solid
> > Sent: Thursday, January 10, 2008 2:29 PM
> > To: nagios-users@lists.sourceforge.net
> > Subject: Re: [Nagios-users] DISK UNKNOWN
> >
> >
>
>
> > command[check_disk3]=/usr/lib64
command[check_total_procs]=/usr/lib64/nagios/plugins/check_procs -w 150 -c
200
On Jan 10, 2008 3:14 PM, Peter Ringe <[EMAIL PROTECTED]> wrote:
> Ha Jack,
>
> Check/Show us the command definition in nrpe.cfg on the monitored box.
>
>
> Jake Solid schrieb:
> > I'
is is for info
drwxr-xr-x 4 user1 3702 4.0K Nov 29 03:02 info
On Jan 10, 2008 11:17 AM, Nathanael Hoyle <[EMAIL PROTECTED]> wrote:
> Jake Solid wrote:
> > I'm using the check_nrpe to check the space of the filesystems. The
> > check_nrpe its able to check the sp
I'm using the check_nrpe to check the space of the filesystems. The
check_nrpe its able to check the space for all the volumes except one of
them
[EMAIL PROTECTED] plugins]# ./check_nrpe -H vm.domain.com -c check_disk3
DISK UNKNOWN - free space:|
disk3 is filesystem /dev/mapper/VolGroup01-infoVol
AIL PROTECTED]> wrote:
> Hi,
>
> On 18/12/2007, Jake Solid <[EMAIL PROTECTED]> wrote:
> > Thanks for your reply.
> >
> > Here is how the command looks like:
> >
> > command[check_disk3]=/usr/lib64/nagios/plugins/check_disk -w 20% -c
> > 10% -p /dev/map
Hello,
I have few servers with CentOS4 64-bit systems and I have found the
need to use a plugin that will check the status of the raid. Anyone
can suggest the most appropriate plugin available? I found few of them
but sure which one will work best.
Thanks in advanced,
---
I'm using the check_nrpe to check the space of the filesystems. The
check_nrpe its able to check the space for all the volumes except one of
them
[EMAIL PROTECTED] plugins]# ./check_nrpe -H vm.domain.com -c check_disk3
DISK UNKNOWN - free space:|
disk3 is filesystem /dev/mapper/VolGroup01-infoVol
I'm using CentOS 4 x86 with perl-DBD-Sybase-1.07-1 installed. I tested using
DBViualiazer to make sure the username and password I was using are correct
and they are.
*I installed the plugins for NRPE and tried testing the check_sybase plugin
but I get the following error message:*
[EMAIL PROTECT
I'm currently running the following version of Cent OS with Sybase 12.5:
Linux database.domain.com 2.6.14.3-vs2.0.1-rc5 #1 SMP Tue Dec 6 14:19:56 EST
2005 x86_64 x86_64 x86_64 GNU/Linu
Can anyone suggest a plugin to monitor the space of a sybase database?
Regards,
---
I'm currently running the following version of Cent OS with Sybase 12.5:
Linux database.domain.com 2.6.14.3-vs2.0.1-rc5 #1 SMP Tue Dec 6 14:19:56 EST
2005 x86_64 x86_64 x86_64 GNU/Linu
Can anyone suggest a plugin to monitor the space of a sybase database?
Regards,
---
Hello,
I have a nagios server already monitoring multiple Linux servers. What will
be the best nagios plugin for monitoring the resources of a Windows XP
machine that its exposed on the Internet?
Thanks in advanced,
-
This SF
I get the following messages on my nagios client when I run the check_nrpe
command from the nagios server.
Nagios Client Log Messages:
17:50:45 vhost6 xinetd[16884]: START: nrpe pid=16889 from=128.121.34.19 Nov
1
17:50:45 vhost6 xinetd[16889]: warning: cannot open /etc/hosts.allow:
Permission de
Everytime I restart nagios the permission for /var/log/nagios/rw/nagios.cmd
change to 660 and if i try to acknowledge a warning I get the following
message:
Error: Could not open command file '/var/log/nagios/rw/nagios.cmd' for
update!
The permissions on the external command file and/or directory
Nagios did a good job reporting a high level of load on one of my servers
during the morning
CRITICAL - load average: 59.62, 31.70, 13.53
Then it sent a recovery alert showing the load as:
OK - load average: 1.72, 1.72, 4.56
How can I find out what exactly put the load a that high level?
Rega
I got this error message:
* Nagios 2.9 *
Notification Type: PROBLEM
Service: Disk3 Usage
Host: host1.domain.pst
Address: 1.2.3.4
State: CRITICAL
Date/Time: Thu Jul 19 09:03:13 EDT 2007
Additional Info:
CHECK_NRPE: Socket timeout after 10 seconds.
When I checked the disk space of my
I use the NRPE deamon my Nagios server to monitor a remote mysql database.
I have the following entry in the nrpe.cfg of my remote server that runs
mysql:
command[check_mysql]=/usr/lib64/nagios/plugins/check_mysql -d my_database
-u root -p mypassword
It connects properly BUT Is there a way tha
Hello,
I'm using CentOS4 x86_64 and I'm having trouble finding a web site where I
can obtain the perl-DBD-Sybase x86_64 RPM. I need this in order to use the
check_sybase module.
Can any one provide me with a location?
Thanks,
How can I monitor a page within a subdirectory on a web server? For
example, the I want to make sure the page
http://domain.com/subdirectory/its accessible.
Can I have nagios get access to the page and find a word within the page to
make sure its accessible?
Thanks.
78 matches
Mail list logo