Thanks for the tip, but the DNS monitoring was only one example. There are
also some other queries like WMI, SNMP, agent monitoring aso.
Cheers!
An: Nagios Users List
Datum: 09/09/2011 02:03 AM
Betreff:Re: [Nagios-users] Aggregate multiple
interfaces/services/hosts
Could you
Hello,
I would like to monitor a couple of devices ( servers and witches) that
are connected to the network via at least two interfaces. Nagios server is
connected as well over two interfaces to the LAN. My question is:
Is there any way to aggregate the monitored services/hosts into a single
o
So your suggestion is to have the -d option set to 60s for a 20s check
interval?
Von:Jim Avery
An: Nagios Users List
Datum: 09/05/2011 10:11 AM
Betreff:Re: [Nagios-users] Antwort: Re: Antwort: Re:
check_snmp_int - No usable data on file
> Hello again Jim,
>
> I have f
Hello again Jim,
I have followed your suggestion and seems better. However, from time to
time, for short periods ( which take 1-2 checks) the status flaps to
unknown and afterwards gets back to normal. Any more clues, please?
Thanks!
Von:Jim Avery
An: Nagios Users List
Datum: 09/0
Hello Jim and thanks for your answer!
I have double checked the files in /tmp created by the script and they are
all owned by nagios group and nagios user, so fully writeable.
The actual check interval of the port is 20 seconds ( I check every 2
units and the time unit is 10 seconds in the nagi
Hello,
I am using check_snmp_plugin to monitor a couple of switches. The command
template I use is:
$USER1$/check_snmp_int.pl -H $HOSTADDRESS$ -C $USER5$ -2 -r -n $ARG1$ -fY
-kqB -g -w $ARG2$ -c $ARG3$ -d $ARG4$
And the particular one for a certain port/device is:
# Monitor bandwidth and por
Hello,
I am using check_snmp_plugin to monitor a couple of switches. The command
template I use is:
$USER1$/check_snmp_int.pl -H $HOSTADDRESS$ -C $USER5$ -2 -r -n $ARG1$ -fY
-kqB -g -w $ARG2$ -c $ARG3$ -d $ARG4$
And the particular one for a certain port/device is:
# Monitor bandwidth and por
Hello and thank your for your answer!
The plugin should be really good for any service, but what about graphing
the perf data?
Let's take the following example:
1 server has two IPs: 192.168.1.1 and 192.168.2.1
I would like to monitor the CPU load via wmi queries on the machine. I
would like
Please list your local-service template, Probably in templates.cfg...
And the definition of your localhost ( I need to see the IP of it).
Von:nag ios
An: Nagios Users List
Datum: 07/11/2011 10:21 AM
Betreff:Re: [Nagios-users] Antwort: Check_WMI
This is the service in loca
Please post your localhost and local-service definitions. If localhost is
the linux host then you have no chance getting the wmi info.
Von:nag ios
An: Nagios Users List
Datum: 07/11/2011 09:46 AM
Betreff:[Nagios-users] Check_WMI
Hi this is krishna,
Hello,
I have the following setup: Nagios server monitoring a few servers on a
redundant network. Each system has two NICs, so two IP addresses. I would
like to setup Nagios in such a way that when I want to see if a host is up
for example, it should ping first on ti's first IP and if failed, t
Have a look here: http://www.edcint.co.nz/checkwmiplus/?q=samples
Von:nag ios
An: Nagios Users List
Datum: 07/06/2011 03:54 PM
Betreff:Re: [Nagios-users] Antwort: Check-wmi-plus usage
can you provide me the builtin documentation so that i can work on
it..
I will pr
What have you tried till now and what errors do you get? Or want one of us
to provide you the config so you can copy/paste? For even advanced usage,
the builtin documentation should be enough. Implemented by myself in about
2-3 days after reading.
Regards!
Von:nag ios
An: nagiosus..
Please check the value of the variable $USER1$ in /etc/nagios/resource.cfg
and see if the check_ping is present there.
You can also mail me back the content of the resource.cfg file as well as
the output of the command:
ls -al check_ping
run into the path in which $USER1$ is pointing to.
M
And the command definition please!
Von:nag ios
An: Nagios Users List
Datum: 07/06/2011 12:28 PM
Betreff:Re: [Nagios-users] Antwort: Plugin may be missing error
only forPING service
the service which wa defined was
define service{
use local-service
Hello,
I have tried o play a bit with the service dependencies list and defined
the following:
define servicedependency{
dependent_host_name WS1
dependent_service_description CPU usage,Disk I/O
usage,Individual CPU core usage,Memory usage
host_name
Hi Krishna,
Please detail a bit the configuration on your side: the definition of the
command would be helpful and the usage of it on the host as well.
Regards!
Von:nag ios
An: Nagios Users List
Datum: 07/06/2011 08:12 AM
Betreff:[Nagios-users] Plugin may be missing error o
Please be aware that if you change it you have to save it in a PDF 5.0
compatible format ( did not try if higher versions work, but 9.0 sure not
working) , otherwise PNP will complain about bad encryption of the file.
Radu
Von:Joerg Linge
An: Nagios Users List
Datum: 07/06/2011 08:
This modifies the entire color font, not only watermark.
Von:Joerg Linge
An: Nagios Users List
Datum: 07/04/2011 03:46 PM
Betreff:Re: [Nagios-users] PNP4Nagios watermark font colour
radu.p...@technomatic.de schrieb:
> Hello,
>
> Can this color of the font be changed? Even m
Hello,
Can this color of the font be changed? Even more if possible: can half of
the watermark word be written in a color and the other half in another
color?
Thank you!--
All of the data generated in your IT infrastruc
Please check the typo error in the command definition:
Maybe you should replace %ARG1% with $ARG1$
Regards!--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive recor
Damn, was all the time in front of me: the picture inserted was a stamp, so
obviously that the PNP would not use it. Added as a normal picture and
appeared immediately.
Sorry for keeping you busy :(
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum
ocal.php
#
# Use this file as PDF background.
#
$conf['background_pdf'] = '/usr/local/pnp4nagios/etc/background.pdf' ;
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 07/02/2011 02:19 PM
Betreff:Antwort: RE: MRTG graphs problem - me
!
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 07/02/2011 12:38 PM
Betreff:Antwort: RE: MRTG graphs problem - measurement units not taken
into consideration
PNP version is 0.6.13 and you are totally right about the config_local.php
://docs.pnp4nagios.org/pnp-0.6/webfe_cfg
Joerg
Von:Radu Popa/Technomatic
An: Radu Popa/Technomatic@Maxdorf
Kopie: nagios-users@lists.sourceforge.net
Datum: 07/02/2011 12:24 PM
Betreff:Antwort: RE: MRTG graphs problem - measurement units not taken
into
x27;ve covered this topic before either
here or on the PNP email list some time in the last few months).
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 07/02/2011 09:36 AM
Betreff:Antwort: RE: MRTG graphs problem - measurement units not
taken into co
works at:
http://oss.oetiker.ch/rrdtool/doc/rrdgraph_graph.en.html
and some general help on PNP templates at:
http://docs.pnp4nagios.org/pnp-0.6/tpl
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 06/29/2011 03:23 PM
Betreff:Antwort: RE: MRTG graphs p
After adding the -r option it works like a charm!
Now in pnp4nagios I can see both values on the same graph: bytes in and
bytes out. I see them as two thin lines. Any way to make the lines thicker
and change their colour?
Von:Radu Popa/Technomatic
An: nagios-users
Do I have to enter any escape character?
Thank you!
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 06/29/2011 01:29 PM
Betreff:Antwort: RE: MRTG graphs problem - measurement units not
taken into consideration
Ok,
Here is what I got so
final/hard state is determined
}
In nagios service status I get now: ERROR: Description table : No response
from remote host "192.168.2.1".
In resources I have defined $USER5$=Public
Ideas, please?
Thank you!
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge
took it from listing all available interfaces on the
switch.
Any ideas, please?
Thanks!
Von:Radu Popa/Technomatic
An: nagios-users@lists.sourceforge.net
Datum: 06/28/2011 03:31 PM
Betreff:MRTG graphs problem - measurement units not taken into
consideration
Hello,
I am using
Hello,
I am using Nagios to monitor the bandwidth usage of a couple of
switches/routers via the check_local_mrtgtraf command. The graphs I handle
via pnp4nagios. The problem I encounter is the following: if the monitored
bandwidth is at one point expressed in KB/s and then I bring a lot of
tra
Dear all,
I have a working installation of Nagios + PNP 4 Nagios. How can I monitor
and graph the usage of CPU on a windows machine for one or more processes?
I have triedm but without too much luck by using check_wmi: I get the
information, but not as performance data so I can graph it.
Thank
33 matches
Mail list logo
