Hi everybody,
Any body has template for zabbix for Cisco 7606?
I need:
- In/Out interface traffic, uptime, cpu & memory utilization,
temperatures, ...
- Graph and Trigger
Thanks
--
Regards,
Shahab Vahabzadeh, Network Engineer and System Administrator
Cell Phone: +1 (415) 871 0742
PGP
Hi Shawn,
Maybe 3K USD but i am open to any recommendation.
The usage is going to be almost daily
It seems Fujikura is the top contender
Cheers
On 3/18/2014 8:35 PM, Shawn L wrote:
It depends on what you mean by affordable and how much you're going to
use it.
On Tue, Mar 18, 2014 at 4:
On 3/18/2014 6:11 PM, Jay Ashworth wrote:
From: "Randy"
I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to
a 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
cords...sanity check...are connectors 'similar' enough that this is
possible (with force) or am
On Tue, Mar 18, 2014 at 09:39:46PM -0400, William Herrin wrote:
> There just aren't a whole lot of failure modes here that result in
> fire short of one or the other breaker failing. And that results in
> fire regardless of the amperage mismatch.
>
>
> This, by the way, is why you're allowed to p
On 3/18/2014 2:24 PM, Randy wrote:
I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to
a 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
cords...sanity check...are connectors 'similar' enough that this is
possible (with force) or am I going to find we'v
On Tue, Mar 18, 2014 at 6:54 PM, Niels Bakker wrote:
> * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
>> I have had to do this at times but it is not strictly allowed by codes and
>> not at all recommended.
>
> It's an active fire hazard. The cables aren't rated (= built) for th
It's temporary unless it works.
-Laszlo
On Mar 18, 2014, at 11:30 PM, Jay Ashworth wrote:
> - Original Message -
>> From: "Stephen Sprunk"
>
>> On 18-Mar-14 17:54, Niels Bakker wrote:
>>> * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
I have had to do this at t
- Original Message -
> From: "Stephen Sprunk"
> On 18-Mar-14 17:54, Niels Bakker wrote:
> > * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
> >> I have had to do this at times but it is not strictly allowed by
> >> codes and not at all recommended.
> >
> > It's an active
- Original Message -
> On 18-Mar-14 17:54, Niels Bakker wrote:
> > * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
> >> I have had to do this at times but it is not strictly allowed by
> >> codes and not at all recommended.
> >
> > It's an active fire hazard. The cables a
On 03/18/2014 7:11 pm, Jay Ashworth wrote:
As it happens, the chart at
http://www.stayonline.com/reference-nema-locking.aspx
suggests that the L6-20 and L6-30 are less different than you'd expect.
I *think* those are on different diameters, and a datacenter employee
ought
to friggin' know b
Go look at any standard household lamp. It has a 5-15P on the end of it, which
could be plugged into an outlet rated for 20 amps (5-20R), with 16 gauge lamp
cord rated for 10 amps or less.
It all depends on the connected load.
> * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
Strictly speaking, no, you cannot do this. The diameter of the pattern of the
pins are different 20 to 30 amps.
If no electrical inspectors are looking, yes, you can bend the pins and "make
it work." I've done it, others have done it, but you shouldn't do it and it is
a clear electrical code vi
On 18-Mar-14 17:54, Niels Bakker wrote:
> * w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
>> I have had to do this at times but it is not strictly allowed by
>> codes and not at all recommended.
>
> It's an active fire hazard. The cables aren't rated (= built) for the
> power draw
- Original Message -
> From: "Randy"
> I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to
> a 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
> cords...sanity check...are connectors 'similar' enough that this is
> possible (with force) or am I go
On Tue, 18 Mar 2014, Randy wrote:
I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to a
208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
cords...sanity check...are connectors 'similar' enough that this is possible
(with force) or am I going to find we
I've had to do that before; provider gave me a 208v/30a circuit and I
already had a power strip I wanted to re-use that had a corded L6-20P
connector on it. I purchased a L6-30P plug / L6-20R receptacle adapter
from http://www.stayonline.com/nema-locking-6-30-amp-adapters.aspx
They're only $25 and
Crap, was looking at the non-locking ones. Ignore that.
On Tue, Mar 18, 2014 at 3:54 PM, George Herbert wrote:
>
> https://www.21cii.com/ITStudio/Content/Resources/Images/Appendix/Plug%20&%20Power/SB%202P-3W_505x447.png
>
> I think the 250 v 15 amp plugs fit in the 20 amp sockets, but the 20s
>
Randy wrote:
>
>I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to
>a 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
>cords...sanity check...are connectors 'similar' enough that this is
>possible (with force) or am I going to find we've actually got
https://www.21cii.com/ITStudio/Content/Resources/Images/Appendix/Plug%20&%20Power/SB%202P-3W_505x447.png
I think the 250 v 15 amp plugs fit in the 20 amp sockets, but the 20s don't
fit in the 30 sockets.
This sort of thing is usually an adapter, a little cylinder with a L6-20R
on one end and a L6
The connectors are definitely distinct and incompatible, you won't be able to
force a 20 into a 30 or vice versa.
So yes, one of the ends has been changed.
M.
Original Message
From: Randy
Sent: Tuesday, March 18, 2014 18:42
To: nanog@nanog.org
Reply To: a...@djlab.com
Subject: L6-20P -> L
* w...@typo.org (Wayne E Bouchard) [Tue 18 Mar 2014, 23:53 CET]:
I have had to do this at times but it is not strictly allowed by
codes and not at all recommended.
It's an active fire hazard. The cables aren't rated (= built) for the
power draw.
-- Niels.
The whole point behind the locking connectors (like the IEC
connectors) is to prevent you from plugging the wrong connectors
together. Not only are the different dimensions, but the prongs are
keyed differently as well.
If you put a L6-20P device into a L6-30R, then it was done by
physically repla
They're different. You can't force them.
On Tue, Mar 18, 2014 at 12:24 PM, Randy wrote:
> I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to a
> 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
> cords...sanity check...are connectors 'similar' enough t
I have a situation where a 208v/20A PDU (L6-20P) is supposedly hooked to
a 208v/30A circuit (L6-30R). Before I order the correct PDU's and whip
cords...sanity check...are connectors 'similar' enough that this is
possible (with force) or am I going to find we've actually got L6-20R's
on the pr
www.eda.gov has been broken since January.
It has a record but when clients connect via IPv6 they see "Bad Request
(Invalid Hostname)” rather than the web site.
On Mar 17, 2014, at 1:43 PM, Matthew Kaufman wrote:
> Random IPv6 complaint of the day: redirects from FCC.gov to pay.gov fai
On 3/18/14, 11:53 AM, Rob Seastrom wrote:
>
> Atticus writes:
>
>> Use avahi.
>
> Isn't that built into netatalk3?
netatalk does the mdns for my afp shares and seems to work.
> -r
>
>
signature.asc
Description: OpenPGP digital signature
Atticus writes:
> Use avahi.
Isn't that built into netatalk3?
-r
I've had decent luck reaching out to abuse_...@abuse-att.net, any other method
of contact seems to just go to /dev/null.
It does generally take longer than 2 days to hear back, patience is a virtue.
- Original Message -
From: "Robert Webb"
To: "Suresh Ramasubramanian"
Cc: nanog@nanog.o
It depends on what you mean by affordable and how much you're going to
use it.
On Tue, Mar 18, 2014 at 4:47 AM, Pui Edylie wrote:
> Dear Member,
>
> Anyone can recommend a reliable and "affordable" fusion splicer please?
>
> Thanks!
>
>
>
Use avahi.
Dear Member,
Anyone can recommend a reliable and "affordable" fusion splicer please?
Thanks!
31 matches
Mail list logo
