Brother P-7600 + TZ tape works great for just about all cable in my
experience. They are pretty cheap too @ $150
[mailto:r...@seastrom.com]
Sent: Tuesday, August 21, 2012 9:11 PM
To: nanog@nanog.org
Subject: NANOG poll: favorite cable labeler?
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire labeler.
So long as the supplies were fresh it was great.
In the storage unit I
can buy them from CDW as well. We also have the Brady and
personally I like the Dymo better.
Steve
-Original Message-
From: Steve Meuse [mailto:sme...@mara.org]
Sent: Tuesday, August 21, 2012 9:22 PM
To: Mike Lyon
Cc: nanog@nanog.org
Subject: Re: NANOG poll: favorite cable labeler
What are people using to label LC jumpers (simplex and duplex)? I like the
Sheet idea from Leo but does it work well with things not cat5?
Thanks,
Jensen Tyler
Sr Engineering Manager
Fiberutilities Group, LLC
: Wednesday, August 22, 2012 8:50 AM
To: nanog@nanog.org
Subject: RE: NANOG poll: favorite cable labeler?
What are people using to label LC jumpers (simplex and duplex)? I like
the Sheet idea from Leo but does it work well with things not cat5?
Thanks,
Jensen Tyler
Sr Engineering Manager
In a message written on Wed, Aug 22, 2012 at 01:50:08PM +, Jensen Tyler
wrote:
What are people using to label LC jumpers (simplex and duplex)? I like the
Sheet idea from Leo but does it work well with things not cat5?
It works fine with fiber, you just get less space. If you think
about
I tend to go for the cheapest thing you can that will get the job done
professionally.
Chances are any brand will get the same amount of abuse and need to be
replaced around the same time. We use the Brother PT-1400 and for the
price you can't beat it.
Does everything we need (has the features
We're fans of Panduit self laminating labels wrapped around their
LabelCore product (which is pretty much just a piece of foam which
brings the diameter up to about to that of a cat5e cable). Since it
doesn't actually stick to the cable it makes it trivial to remove with
scissors, and you can
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire
labeler. So long as the supplies were fresh it was great.
In the storage unit I have a Brady TLS2200. Supplies are expensive,
but it works reasonably well. Unfortunately the battery is shot
(gotta replace
Having used quite a few of the wire label makers over the years I still
like the TLS2200 the best. Mostly because the labels actually last in
poor environments for long times. In conditioned indoor space you may
very well be able to use cheaper equipment.
Brady makes a AC power adapter for
On Tue, 21 Aug 2012, Robert E. Seastrom wrote:
Labeling cables is mostly what I'm interested in. The el-cheapo
p-touch seems adequate to putting hostnames on machines.
Brother makes a P-touch that uses the TZ series label cartridges that
works reasonably well for cables. That, plus some
On 8/21/12 6:10 PM, Robert E. Seastrom wrote:
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire
labeler. So long as the supplies were fresh it was great.
In the storage unit I have a Brady TLS2200. Supplies are expensive,
but it works reasonably well.
I bought the Brady BMP21 handheld labeler from Frys about a month ago.
It takes 6x AA batteries i believe. You can buy the power cable and
case for it if you want. I love it so far.
-mike
Sent from my iPhone
On Aug 21, 2012, at 18:29, Seth Mattinen se...@rollernet.us wrote:
On 8/21/12 6:10
Robert E. Seastrom wrote:
Labeling cables is mostly what I'm interested in. The el-cheapo
p-touch seems adequate to putting hostnames on machines.
Thoughts?
My Rhino Pro 5000 has printable, tubular, heat shrink cartridges available in white and yellow as well as the flat stuff
in nylon and
labels at a time
this way and give a minon something to do for an hour :)
-Original Message-
From: Mike Lyon [mailto:mike.l...@gmail.com]
Sent: Tuesday, August 21, 2012 7:47 PM
To: Seth Mattinen
Cc: nanog@nanog.org
Subject: Re: NANOG poll: favorite cable labeler?
I bought the Brady BMP21
Fancy printers are fine, but if you buy sheets of laser printer self
laminating labels you have the choice of printing on a laser printer,
or simply using a sharpie (fine point recommended) to hand-write a label
and then self laminate.
http://www.cablelabelsusa.com/category/PER-SHEET-16
Keeping
The BMP21 has kinda sucky cable labels, IMO.
-Steve
On Tue, Aug 21, 2012 at 9:46 PM, Mike Lyon mike.l...@gmail.com wrote:
I bought the Brady BMP21 handheld labeler from Frys about a month ago.
It takes 6x AA batteries i believe. You can buy the power cable and
case for it if you want. I love
-Printers.html
-Original Message-
From: Robert E. Seastrom [mailto:r...@seastrom.com]
Sent: Tuesday, August 21, 2012 9:11 PM
To: nanog@nanog.org
Subject: NANOG poll: favorite cable labeler?
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire labeler.
So
On Aug 21, 2012, at 18:10 , Robert E. Seastrom r...@seastrom.com wrote:
Hey everyone,
Many moons ago I worked in a place where we had a Brady LS2000 wire
labeler. So long as the supplies were fresh it was great.
In the storage unit I have a Brady TLS2200. Supplies are expensive,
but
printers always pissed me off when labeling tons of cables. i always
preferred those little plastic things that you clip on them. if you
want to be pro about it, i guess you can have something that is
printed and sticks to it, but i always just used a sharpie on them
(most of the time, the sharpie
On Tue, Aug 21, 2012 at 9:10 PM, Robert E. Seastrom r...@seastrom.com wrote:
Labeling cables is mostly what I'm interested in. The el-cheapo
p-touch seems adequate to putting hostnames on machines.
Thoughts?
3M (Scotch) Color Coding Vinyl Electrical Tape 35. Cheap and
effective. Works like
21 matches
Mail list logo
