, November 3, 2017 9:26 AM
To: Hank Nussbacher
Cc: nanog@nanog.org
Subject: Re: Are there inexpensive DWDM products?
Also look at these guys,
https://www.optelian.com/products/dwdm-optical-multiplexing/
On Fri, Nov 3, 2017 at 1:10 AM, Hank Nussbacher
wrote:
> On 02/11/2017 20:01, LF OD wr
Also look at these guys,
https://www.optelian.com/products/dwdm-optical-multiplexing/
On Fri, Nov 3, 2017 at 1:10 AM, Hank Nussbacher
wrote:
> On 02/11/2017 20:01, LF OD wrote:
>
> Try: https://www.packetlight.com/
>
> -Hank
>
> > We have several buildings and a couple data centers spread around
On 02/11/2017 20:01, LF OD wrote:
Try: https://www.packetlight.com/
-Hank
> We have several buildings and a couple data centers spread around the city
> and interconnected via dark fiber. It's a very simple setup - no ROADM, no
> real ring, no extended layer-2 or layer-3 via the optical gear.
On Thu, Nov 2, 2017 at 11:12 PM, Christopher Morrow wrote:
>
>
> On Thu, Nov 2, 2017 at 10:21 PM, Brent Jones
> wrote:
>
>> I've set a few people up with FS.com, and my $employer uses then for a lot
>> of DWDM without issue.
>>
>>
> as another fs.com user of cwdm muxes... yes, in the limited sam
On Thu, Nov 2, 2017 at 10:21 PM, Brent Jones wrote:
> I've set a few people up with FS.com, and my $employer uses then for a lot
> of DWDM without issue.
>
>
as another fs.com user of cwdm muxes... yes, in the limited sample I have
they work for me...
you ought to be able to pair the CWDM muxes l
I've set a few people up with FS.com, and my $employer uses then for a lot
of DWDM without issue.
Quality bites everyone, cleaning terminations is one of the neglected steps
:p
On Thu, Nov 2, 2017 at 2:36 PM, Micah Croff wrote:
> I've used Adva passive DWDM MUX's and colored FlexOptix DWDM 10G
fs.com DWDM with a 1310 pass through port. That way you can still run 40G or
100G over the 1310.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
Midwest-IX
http://www.midwest-ix.com
- Original Message -
From: "LF OD"
To: nanog@nanog.org
Sent: Thurs
Wow... a lot of suggestions and very quickly too. CWDM may not be an option
because some of the spans are just out of range, but I'm going to look at it
for the short spans.
Thanks for all the feedback, folks. (I'll contact some of you off-board)
LFOD
From:
I've used Adva passive DWDM MUX's and colored FlexOptix DWDM 10G optics. It
worked very well with zero issues. I haven't personally used MUX's from
fs.com but I've had colleagues use them and caution against them due to the
quality.
On Thu, Nov 2, 2017 at 1:37 PM, Mike Hammett wrote:
> fs.com D
pleased with the price vs's value
and support.
Robert Jacobs | Network Architect & Director
-Original Message-
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Romeo Czumbil
Sent: Thursday, November 2, 2017 1:48 PM
To: LF OD ; nanog@nanog.org
Subject: RE:
CWDM option might be your best bet here.
If you need more channels and you want to go to DWDM then check out Ekinops
Great product and they don't charge as much as the other guys
-Original Message-
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of LF OD
Sent: Thursday, November 2
These guys seem to be a white box solution for Optical. https://www.lumentum.com
I see that Juniper and Infinera have both worked on solutions to work on their
hardware.
Luke Guillory
Vice President – Technology and Innovation
Tel:985.536.1212
Fax:985.536.0300
Email: lguill...@re
CWDM is cheaper and will probably work fine within a city. Check fs.com.
On Thu, Nov 02, 2017 at 06:01:10PM +, LF OD wrote:
> We have several buildings and a couple data centers spread around the city
> and interconnected via dark fiber. It's a very simple setup - no ROADM, no
> real ring,
13 matches
Mail list logo
