On 4 Aug 2010, at 17:58, Thomas Weible wrote:
Cisco did a quite good job on implementing the DDM characteristics of the
optics. So why not to take a 32dB or even 41dB power budget SFP and make it
workable in the switch / router. Works like charm in some setups and you see
straight the
On Aug 4, 2010, at 12:27 PM, Abello, Vinny wrote:
Thanks for the input, Justin. I'm familiar with Transition Networks and have
used their solutions in other scenarios (as well as MRV). I'm aware of the
fiber characteristics being a major factor of the link budget and
dispersion, etc. I am
: Recommended 1Gb SFP for ~115km?
On Aug 4, 2010, at 12:27 PM, Abello, Vinny wrote:
Thanks for the input, Justin. I'm familiar with Transition Networks and have
used their solutions in other scenarios (as well as MRV). I'm aware of the
fiber characteristics being a major factor of the link budget
Hello,
Any pointers on real world experience on this topic would greatly be
appreciated. What are people using successfully out there as far as third
party SFP's go to hit a distance of approximately 115km? This would be for a
Catalyst 6506. Cisco's solution was a much more costly EDFA
On Wed, 4 Aug 2010, Abello, Vinny wrote:
Any pointers on real world experience on this topic would greatly be
appreciated. What are people using successfully out there as far as third
party SFP's go to hit a distance of approximately 115km? This would be for a
Catalyst 6506. Cisco's solution
the splicing of the fiber for us so I know what I have to work
with.
Thanks again!
-Vinny
-Original Message-
From: Justin M. Streiner [mailto:strei...@cluebyfour.org]
Sent: Wednesday, August 04, 2010 7:46 AM
To: Abello, Vinny
Cc: nanog@nanog.org
Subject: Re: Recommended 1Gb SFP
technology.
-Ursprüngliche Nachricht-
Von: Abello, Vinny [mailto:vinny_abe...@dell.com]
Gesendet: Mittwoch, 4. August 2010 18:27
An: Justin M. Streiner
Cc: nanog@nanog.org
Betreff: RE: Recommended 1Gb SFP for ~115km?
Thanks for the input, Justin. I'm familiar with Transition Networks
On Wed, 4 Aug 2010, Thomas Weible wrote:
the setup with two media-converters works but has a major drawback. If
you want to see the overall line (digital diagnostic) you always have to
take into consideration that there are actually 3 physical links
involved in the overall link. Looking from
8 matches
Mail list logo