net-snmp 5.3.1 snmptrapd doesn't log traps

I've been using ucd-snmp for several years and recently upgraded to net-snmp for its IPV6 capabilities. However I'm running into a problem with snmptrapd. It doesn't seem to want to log the traps it receives, and it does receive them. In fact, it even responds to informs that it receives as

Re: snmptrapd

Hello Dave, > Just a thought - try specifying the port explicitly. > I.e. use "host:162" rather than just "host" When I append ":162" to the host, snmptrap command outputs "unknown host". But I don't think that's part of the problem because when I run snmptrap with -d option, it shows: Sending 7

Re: Annoing ifInOctets counter problem

Stefano Bossi wrote: > So the agent sends a correct value of octets but too large to fit a 32 > bits value but the client print the wrong value; if also the client is > running on a 64 bit CPU the value is correct! [...] > P.S. All the machine above are Gentoo linux so the net-snmp framework is

Building for windows Microsoft VC7 and VC8

Hello,I had problems with attempting to build and installon Windows XP using 5.1.3 net-snmp package.On one machine was installed Microsoft Visual Studio V7 I built the package in its entiretywithout failure using the intructions given in thereadme.win32 file. I never saw any problem except whentes

Re: snmptrapd

On 18/08/06, Jonathan Shan <[EMAIL PROTECTED]> wrote: > > It definitely sounds like firewall settings - not a separate firewall, > > but the snmptrapd system itself. > > But I can receive snmp-traps. Meaning I run snmptrapd, then I power-off > and power-on the device. I get snmptraps on interface s

NET-SNMP 5.3 and Fedora Core 5 (traffic update every 30 seconds)

Dear Sirs   I've been using two tools to graph dozens Linux machines for years. - For short term: STG (SNMP Traffic Grapher: http://leonidvm.chat.ru/) - For long term graph: CACTI (http://cacti.net/)   The machines I administer are: few Debian, some Cisco routers and a lot of RedHat and Fedora Core

Re: snmptrapd

Hello Dave, > It definitely sounds like firewall settings - not a separate firewall, > but the snmptrapd system itself. But I can receive snmp-traps. Meaning I run snmptrapd, then I power-off and power-on the device. I get snmptraps on interface status and coldstart. I believe the problem may

Building for windows Microsoft VC7 and VC8

Hello, I had problems with attempting to build and install on Windows using 5.1.3 net-snmp package. On one machine I built the package in its entirety without failure using the intructions given in the readme.win32 file. I never saw any problem except when testing the perl module, some tests did

Building for windows Microsoft VC7 and VC8

Hello, I had problems with attempting to build and install on Windows using 5.1.3 net-snmp package. On one machine I built the package in its entirety without failure using the intructions given in the readme.win32 file. I never saw any problem except when testing the perl module, some tests did

Annoing ifInOctets counter problem

Hi to all, I have just installed the net-snmp framework in order to monitor the network behavior of a remote linux server. I found a naive bug (or a configuration problem, I don't know) in the value reported by the ifInOctets, If I perform a snmpget request to the machine from my desktop, the a

Re: NetSNMP 5.3.1 Perl Module Problem

Hello, Thank you for your support! After I add the following lines into /etc/ld.so.config, /lib /usr/lib /usr/local/lib The test no. 34 become pass. I think the installation of NetSNMP and its Perl module is Okay. Thank you again. The Perl Module "make test" has some errors. The error message i

Re: [opennms-discuss] Net-SNMP + Solaris kstat + OpenNMS

Jean-Sebastien Morisset wrote: > I wrote a little Net-SNMP "pass_persist" script to allow polling of > Solaris kstat information, and then display the results in OpenNMS. Here > are some of the details: [...] > mibs+NET-SNMP-PASS-PERSIST-MIB [...] > PassPersist MODULE-IDENTITY > LAST-UPDATE

Re: Agent for FreeBSD supporting compaq branch

> "t" == timon <[EMAIL PROTECTED]> writes: t> I would like to monitor the hardware performance of the ProLiant t> Server DL380, but the compaq OID is not included by default in the t> configuration of the NEt-SNMP agent.I think that the agent could be t> extended to show that information .Doe

Re: Agent for FreeBSD supporting compaq branch

timon wrote: > I would like to monitor the hardware performance of the ProLiant Server > DL380, > but the compaq OID is not included by default in the configuration of the > NEt-SNMP agent.I think that the agent could be extended to show that > information .Does anyone know how to set the Net-S

Re: 5.3.1 on AIX 4.3.3

Angerstein wrote: > I found the file where I saved the errors. [...] > LD_RUN_PATH="/tmp/net-snmp-5.3.1/perl/SNMP/../../snmplib/.libs:/lib" ld -o > ../blib/arch/auto/SNMP/SNMP.so -bhalt:4 -bM:SRE > -bI:/usr/opt/perl5/lib/5.00503/aix/CORE/perl.exp -bE:SNMP.exp -b noentry -lc > SNMP.o-L/tmp/n

AW: 5.3.1 on AIX 4.3.3 (was: Re: Surprising Success on Novell/Suse 10.1Beta)

Hi, there I found the file where I saved the errors. -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Thomas Anders Gesendet: Donnerstag, 17. August 2006 16:24 An: Angerstein Cc: net-snmp-users@lists.sourceforge.net Betreff: 5.3.1 on AIX 4.3.3 (was:

snmpconf problem

Hi   I am installing net-snmp 5.3.1 and I followed these steps: ./configure –prefix=/root/net-snmp-5.3.1 Make Make install snmpconf  -g basic_setup I am getting the following msgs The following installed configuration files were found:      1:  ./snmp.conf   Would you like me to