RE: Failed object

From: Jun Zhang [mailto:[EMAIL PROTECTED] Sent: Friday, January 25, 2008 2:49 PM Here are the files snmp.conf and snmpd.conf, Both installations were from binary net-snmp-5.4.1. When I did the last test and get the same error on the 2003 Server, the agent is started as a service, I don't

RE: Failed object

Here are the files snmp.conf and snmpd.conf, Both installations were from binary net-snmp-5.4.1. When I did the last test and get the same error on the 2003 Server, the agent is started as a service, I don't see a snmpd process in the taskmgr, though. While the hrSystemDate.0 failed, sysUpTime.0

RE: Failed object

From: Jun Zhang [mailto:[EMAIL PROTECTED] Sent: Friday, January 25, 2008 1:13 PM I got 12 lines of the output. So you've got host resources support. The next suspect would be access control. Check your snmpd.conf file to see if community public has access to the host resources

RE: Failed object

I got 12 lines of the output. Jun Mike Ayers [EMAIL PROTECTED] wrote: From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jun Zhang Sent: Thursday, January 24, 2008 1:47 PM When I issue the command, snmpget -v 1 -c public localhost hrSystemDate.0 I got, Error in packet

SNMP v3 - Authentication - Report PDU/Trap

hi, RFC 3414, section 3.2 (Processing an Incoming SNMP Message), point no. 6 says as follows : If the authentication module returns failure, then the message cannot be trusted, so the usmStatsWrongDigests counter is incremented and an error indication

RE: SNMP v3 - Authentication - Report PDU/Trap

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karthick Babu Sent: Thursday, January 24, 2008 11:45 PM RFC 3414, section 3.2 (Processing an Incoming SNMP Message), point no. 6 says as follows : If the authentication module returns failure, then the

RE: One question about net-snmp

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shang Linda-q19362 Sent: Thursday, January 24, 2008 7:44 PM We want to support duplicate attribute name in different table with different OID. Yes, and no, depending on what you want. You can have the same relative

Net-Snmp make error in AIX 5.3

I'm having a make issue with the 5.4.1 net-snmp on an AIX 5.3 server and was wondering if folks have seen this scenario/errors before and what I might be doing wrong. Any help would be appreciated I downloaded the 5.4.1 tar. Untarred it into /usr/lpp/. Went into

check_snmp_win.pl error

The command I used is check_snmp_win.pl -v -H localhost -C public -n net-snmp -N 2 and I got Alarm at 15 5000 ERROR: Process name table : Requested table emplty or does not exist. This is a MS Server 2003. The same command used on a Windows XP workstation is fine, I got Desc : DNS

One question about net-snmp

Hi all, I have one question here. I want to know the bellow case if support by net-snmp framework. We want to support duplicate attribute name in different table with different OID. Anybody can answer this question? Thanks in advance. Best regards. Linda

RE: Failed object

I don't see I have this net-snmp-config tool, does it belong to net-snmp? Jun Mike Ayers [EMAIL PROTECTED] wrote: From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jun Zhang Sent: Thursday, January 24, 2008 1:47 PM When I issue the command, snmpget -v 1 -c public localhost