Hi,
I'm quite new on the SNMP protocol and I'm trying to figure out if the last
version of SNMP (v3) supports IP multicasting. I've that some kind of
frameworks have been proposed as a possible solution but I don't really know
if it is already standardized. What I would like to know if it
Thank you for you detailed response.
I meant traps and not informs. In any case, I rechecked it without a
port (giving clientaddr only an IP and not of the form ip:port
like I tried until now), and it worked both on 5.4.1 and 5.4.2.
So, the problem was that I assumed that the regular structure of
i installed net-snmp with yum.
but when i used command as follows :
snmpwalk -v 1 -c public 127.0.0.1
console will display some output info as follows:
SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.18-53.el5 #1
SMP Mon Nov 12 02:22:48 EST 2007 i686
SNMPv2-MIB::sysObjectID.0
Am Donnerstag, 13. November 2008 18:32 schrieb chinofish:
i installed net-snmp with yum.
(...)
but when i use
snmpwalk -v 1 -c public 127.0.0.1 mem
[EMAIL PROTECTED] ~]# snmpwalk -v 1 -c public 127.0.0.1 mem
End of MIB
why i can not use
http://www.net-snmp.org/docs/mibs/ucdavis.html
I ran across a problem trying to add my MIBS where net-snmp would hang. I am
cross compiling net-snmp to run on a custom embedded linux application. I
perform a configure where I add my mib handler files but I also add
--with_ldflag=$LDFLAGS, where LDFLAGS=-lpthread.
This took me lots of
John Anderson wrote:
I found that the configure
recognizes the fact that I want it linked with -lpthread and proceeds to
add to include/net-snmp/net-snmp-config.h the following...
#define NET_REENTRANT 1
I cannot reproduce this for 5.4.x SVN:
foo# ./configure LDFLAGS=-lpthread
Greetings snmp users.
I have configured my snmpd.conf file to use snmpv3, and I ran tests using snmp
commands to verify that the snmpget and snmpwalk commands retrieve the
requested data from the appropriate MIBs. However, I am encountering a
situation where the engine ID seems to be getting
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the
Greetings snmp users.
I have configured my snmpd.conf file to use snmpv3, and I ran tests using snmp
commands to verify that the snmpget and snmpwalk commands retrieve the
requested data from the appropriate MIBs. However, I am encountering a
situation where the engine ID seems to be getting