Hi,
Is it mandatory to enter something in the community string field? Can it be of
zero length?
If yes, then is there any default value that will be used or is it left to the
developer to decide?
"No task is so humble that it does not offer an outlet for individuality"
__
Hi All,
I am trying to create the "USER" in net-snmp 5.4.2.1
I have a doubt "Like How does user details will store".
Does it store in persistence memory or as a link list
or link list will store in persistence memory ?
Does it require to call "read_configs()" function init time.
Thank you for your reply.
I compiled net-snmp-5.2.2 sources and installed it.
As you said, I tried running the agent with some options and queried for
lmFanSensorsTable.
And the result was,
NET-SNMP version 5.2.2
ucd-snmp/lmSensors: Reading the
Hello,
I'm working with an APC AP9320 environmental management system. This
device has some output relays which are in a sequence as follows:
OutputRelayControlEMSEntry ::=
SEQUENCE {
emsOutputRelayControlOutputRelayIndex INTEGER,
emsOutputRelayControlOutputRelayNameDisplayS
Hi,
Anybody knows if it is possible to configure snmptrapd to modify the
community string on forwarded traps, maybe something like trapsess? I
would like to add something like this into my snmptrapd.conf.
forward default 10.1.1.1 community1
forward default 10.2.2.2 community2
while the in
2009/4/3 sanjaykumar :
> I going through the agent/mibgroup/mibII/interfaces.c file , I got a doubt
> about the definition of function "SetIfEntry".
> I didn't find it in netsnmp.5.4.2.1 version.
> Could anyone let me know, which file contains the definition of the
> Function OR it is some sta
2009/4/2 malar vizhi :
> if I have more than two oids in an input list, when I go for 3rd oid, am
> getting
> “No log handling enabled - turning on stderr logging
> Failure in sendto (No such file or directory)”
That sounds very strange indeed.
The problem is that if you've embedded the Net-SNM
2009/4/2 Gabriele Giorelli :
> I am using fedora10 and I am getting this error in the compilation step:
>
> grep: /net-snmp-5.4.1/agent/libnetsnmpagent.la: No such file or directory
> /bin/sed: can't read /net-snmp-5.4.1/agent/libnetsnmpagent.la: No such file
> or directory
> libtool: link: `/net-
2009/4/2 김은영 :
> I installed net-snmp 5.2.2, 5.2.5, 5.3.3.pre1, 5.4.2.1 on Sun Fire V210 with
> ucd-snmp/lmSensors module.
Was this compiled from source, or a binary distribution?
> But I could get the result of the queries on lmTempSensorsTable and
> lmMiscSensorsTable from net-snmp 5.2.2 and 5
2009/4/7 sanjaykumar :
> Is it possible to implement the Ether-Like mib , rfc 3635 using the "ethtool"
> ?
Hmmm...
That might be possible, I suppose.
My immediate reaction was to invoke "ethtool" via a shell script
(registered using the "pass" directive). But there are two major
problems with
Hi ALL,
Is it possible to implement the Ether-Like mib , rfc 3635 using
the "ethtool" ?
Thanks and Regards,
Sanjay kumar
Dave Shield wrote:
> 2009/4/7 Michael Schwartzkopff :
>
>>> In general, the speed of an interface is typically controlled by the
>>> hardware. I'm not aware of a
2009/4/7 Michael Schwartzkopff :
>> In general, the speed of an interface is typically controlled by the
>> hardware. I'm not aware of any mechanism (either via SNMP
>> or on the command line) that would allow you to change this
>
> ethtool
So noted. Thanks.
Though of course, that is specific
Am Dienstag, 7. April 2009 11:09:26 schrieb Dave Shield:
> 2009/4/7 Szymon Klimuk :
> > In MIB interface subtree, there are a lot of objects but only one
> > (IfAdminStatus) has read-write access. I'm interested in ifSpeed object.
> >
> > Is there any read-write object where I can change interface
2009/4/7 Szymon Klimuk :
> In MIB interface subtree, there are a lot of objects but only one
> (IfAdminStatus) has read-write access. I'm interested in ifSpeed object.
> Is there any read-write object where I can change interface speed?
No. I don't believe so.
In general, the speed of an interf
Hi,
In MIB interface subtree, there are a lot of objects but only one
(IfAdminStatus) has read-write access. I'm interested in ifSpeed object.
It's read-only, but for me, there should be some way to change interface
speed via snmp set command.
Is there any read-write object where I can change
2009/4/7 vishal_nitr :
> I am using net-snmp-5.4.1. One more info on this is, when I removed VLAN
> interfaces from my machine I didn't get this error and snmpd started
> perfectly.
> Does net-snmp-5.4.1 has any problems with VLANs ?
I can't recall for definite, but I seem to remember that the
16 matches
Mail list logo
