On 23 July 2010 22:31, Tim Dunphy wrote:
> thanks for the advice, but unless I am looking in the wrong place I
> can't seem to find a MIB that fits this description..
The MIB is called 'UCD-DISKIO-MIB', and the table is diskIOTable.
See the directory 'mibs' in the Net-SNMP source tree.
> snmpwa
thanks for the advice, but unless I am looking in the wrong place I
can't seem to find a MIB that fits this description..
snmpwalk -v 1 -c cci-ro 3par interfaces | grep diskIOTable
returns nothing.
thanks for the suggestion, but still on the road to getting this done.
On Fri, Jul 23, 2010 at 4
On 23 July 2010 20:12, Tim Dunphy wrote:
> However I am at a complete loss as to
> how to gather this information for the disk activity.
Have a look at the UCD-DISKIO-MIB::diskIOTable
Dave
--
This SF.net email is s
Hello,
I've been tasked with writing a script that will:
a) gather statistics about inbound and outbound network activity on
all net interfaces on a 3par storage unit.
b) pump that information into ganglia via gmetric and graph it
c) gather input and output data to each of the physical hard d
On 23 July 2010 14:09, rakesh zingade wrote:
> I need to automate adding trap destination instead of having manual
> trap2sink configured in snmpd.conf.
>
> could you please tell me is there any snmp table already available which I
> can use to add trap dest IP, port and community
As Mike has ind
On 23 July 2010 16:14, K b wrote:
> I want to develop a SNMP agent where my MIB has a table and each row of
> the table are populated by subagents running at different remote hosts.I
> tested with all my suabagents registers with the table OID and each
> subagent adding its own row
That's the
> From: rakesh zingade [mailto:rakeshzing...@gmail.com]
> Sent: Friday, July 23, 2010 6:10 AM
> I need to automate adding trap destination instead of having manual
> trap2sink configured in snmpd.conf.
http://www.ietf.org/rfc/rfc2573.txt
HTH,
Mike
-
Hi,
I want to develop a SNMP agent where my MIB has a table and each row of
the table are populated by subagents running at different remote hosts.I
tested with all my suabagents registers with the table OID and each
subagent adding its own row, but somehow requests are not coming to
subagents
Hi,
I´m trying to set what is sent to syslog by net-snmp, and managed to
obtain some control of the log level with the line
SNMPDOPTS='-LS 4d -Lf /dev/null -u snmp -p /var/run/snmpd.pid'
in my /etc/defaults/snmpd file. Changing the 'n' in '-LS nd' above, I
can control the log level. My probl
Hi,
I want to know, if there is any way to disable/enable/configure the syslog
logging level for snmp agent, by means of dynamic linking or snmpd.conf file
changes, without changing snmp_logging.c file
Thanks,
Kishore
--
Trying to build net-snmp on AIX. Everything seems to compile well, and
install until I get to the Perl and then it stops and I find the Perl
directory Makefile has not even been generated.
This is the config setup. This is building on AIX 7.1 and Perl 5.10.1.
./configure \
--prefix="/o
Hi all,
I need to automate adding trap destination instead of having manual
trap2sink configured in snmpd.conf.
could you please tell me is there any snmp table already available which I
can use to add trap dest IP, port and community [performing snmpset
operation to do this].
Thanks and Regards
Hi All,
My Agent Setup consists of a Master Agent and a Sub Agent. The Communication
between the Master and Subagent is based on the AgentX Protocol via a Unix
Domain Socket [SOCK_STREAM]
The Master Agent is supposed to handle certain SNMP related requests like
SNMPV2 MIB Requests while the sub-a
Hi,
I want to know, if there is any way to disable/enable/configure the syslog
logging level by means of dynamic linking or snmpd.conf file changes, without
changing snmp_logging.c file
Thanks,
Kishore
--
This SF.net
14 matches
Mail list logo