My guess is one machine has the MIB with a display hint & the other doesn't.
$ oid2name .1.3.6.1.2.1.17.4.3.1.1
BRIDGE-MIB::dot1dTpFdbAddress
on my machine the bridge mib has this:
dot1dTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
MacAddress is pulled in from SNMPv2-TC with a displa
Hi All,
I am using an "old" net-snmp version (net-snmp-5.5.0-1.x86.exe) to get
information from stacked switches via the snmpwalk command, but can't figure
out why snmpwalk behaves slightly different in 2 different systems.
I try to explain : I need to get Mac Addresses of devices connected to
Hi!
As a general suggestion, do you allow reading the entire (or the same
part of the) MIB tree? It's not uncommon to have setups that set
specific "views" in the SNMP setup.
Do an snmpbulkwalk of the entire "enterprises" tree to see how much that
differs:
/usr/bin/snmpbulkwalk -v2c -c ***
Hello,
We want to use the NET-SNMP (5.7.3) over TLS in Windows (W7 32 bits). But the
information that we found is not correct.
In the tutorial http://www.net-snmp.org/wiki/index.php/TUT:Using_TLS there is
information about how to compile
You must have added these options when configure was run
