I recently started using the forward feature of the snmpd.conf .
forward default udp::port
I see that my traps were being forwarded to a new ip as well . However I saw
that the source ip was changed . This to me seems to be wrong as i would always
want to preserve source ip addresses before
g:
no access control information configured.
It's unlikely this agent can serve any useful purpose in this state.
Run "snmpconf -g basic_setup" to help you configure the snmpd.conf file for
this agent"
Kindly help on this as its critical
Regards,
Manish Sharma
9920412433
22
intrest in snmp
cheers
Manish
- Original Message -
From: "Manish Pohnekar"
To: "Dave Shield"
Cc:
Sent: Thursday, November 18, 2010 1:51 PM
Subject: Re: Fw: Ways to retrive ip address from cisco routers decimal
orhexadecimal.
> Hi
>
> Sorry for late reply
Hi
Sorry for late reply actualy I tried studying mib files before questioning.
I have lots of mib files and mib.txt file on my machine I am uable detect
which nib file is being used
Thanks
Manish
- Original Message -
From: "Dave Shield"
To: "Manish Pohnekar"
Hi
all,
I am trying to configure SNMPV3 trap simulator in mimic. I used security
password and engineid for it.
Can any one tell me how to put it in v3usm.conf and v3asm.conf configuration
file.
Thanks and regards,
--
Hi
I really need to understand the question in details
where I acn look the bits
and defination
as per #define statement one sourceaddress and another is target address
Manish
- Original Message -
From: "Dave Shield"
To: "Manish Pohnekar"
Cc:
Sent: Tuesday, Novem
Hi we are usinf some thing like below which are OIDS
#define rttMonEchoAdminTargetAddress ".1.3.6.1.4.1.9.9.42.1.2.2.1.2"
#define rttMonEchoAdminSourceAddress ".1.3.6.1.4.1.9.9.42.1.2.2.1.6"
Manish
> - Original Message -
> From: "Dave Shield&
we want only in one hexadecimal .
how can we configure that
Manish
- Original Message -
From: "Manish Pohnekar"
To:
Sent: Thursday, November 04, 2010 3:52 PM
Subject: Re: confirm 8f637fb74678a629987502fc84f52d7b5218b0be
> Hi
>
> All I have one query we are using t
decimal we want only in one hexadecimal .
how can we configure that
Manish
- Original Message -
From:
To:
Sent: Thursday, November 04, 2010 3:36 PM
Subject: confirm 8f637fb74678a629987502fc84f52d7b5218b0be
> Mailing list subscription confirmation notice for mailing list
> Net-snmp
.1.10.60.8.6 = 2
.1.3.6.1.2.1.3.1.1.1.2.1.10.60.8.24 = 2
.1.3.6.1.2.1.3.1.1.1.2.1.10.60.8.77 = 2
.1.3.6.1.2.1.3.1.1.1.2.1.10.60.50.116 = 2
.1.3.6.1.2.1.3.1.1.1.2.1.10.60.50.213 = 2
SNMP-N-EPARSER-Mangled or incorrect packet; parsing aborted and data
discarded
Here you can see the walk is not over and i
not correct, can you please give some insight
on this what can be the problem , is it the deamon or the snmp walk command?
Regards,
Manish
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30
Vincent,
I was giving
sysobjectid enterprises.5713.1.1.2.4
but after giving the following it worked
sysobjectid 1.3.6.1.4.1.5713.1.1.2.4
Thanks for the help.
Regards,
Manish
-Original Message-
From: Vincent Bernat [mailto:ber...@luffy.cx]
Sent: Tuesday, June 16, 2009 12:55 PM
To
not objected.
Regards,
Manish
-Original Message-
From: Manish Gupta [mailto:mani...@niksun.com]
Sent: Tuesday, January 27, 2009 10:08 AM
To: 'Dave Shield'
Cc: 'net-snmp-users@lists.sourceforge.net'
Subject: RE: Not able to create the new row in ifTable through sub
Thanks a ton Dave, It resolved the issue.
Regards,
Manish
-Original Message-
From: Dave Shield [mailto:d.t.shi...@liverpool.ac.uk]
Sent: Tuesday, January 27, 2009 10:15 AM
To: Manish Gupta
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: Not able to create the new row in ifTable
.
Regards,
Manish
-Original Message-
From: dave.shi...@googlemail.com [mailto:dave.shi...@googlemail.com] On
Behalf Of Dave Shield
Sent: Tuesday, January 27, 2009 9:49 AM
To: Manish Gupta
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: Not able to create the new row in ifTable through
create new row of interface
in the existing ifTable created by master snmpd. So is it possible to create
new row by subagent in the ifTable created by master snmpd.
Regards,
Manish
--
This SF.net email is
ow does EMS know the new agent public key since there is no
subsequent get.
Manish
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your j
Hi,
Thanx Dave
It just work by adding "rocommunity public" in snmpd.conf.
Regards
Manish
-Original Message-
From: Dave Shield [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 02, 2006 9:03 PM
To: Manish
Cc: net-snmp-users@lists.sourceforge.net; 'Ravindra Keskar'
S
with this agent.
Please suggest any solutions for the same...
Regards
manish
-Original Message-
From: Dave Shield [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 01, 2006 3:00 PM
To: Manish
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: NET-SNMP agent is not responding to
managerre
responding to manager requests as snmpget.
I tried auto discover agent from MIB Browser it also not recognizing
this as an agent but it is with Microsoft agent service on.
Please let me know what should I do to resolve this and
Net-SNMP agent should be recognized agent.
Regards
Manish
Wanted to know when
snmp key change is triggered by setting usmauthkeychange does the net-snmp agent
wait to update the keys until all the ongoing operations (Sets) are
completed or the keys are updated immediately and the new keys will be used for
responsding to ongoing sets.
Manish Soni
occurring. Is there something wrong in my
SNMPD.CONF file. I cannot determine if it is the mask for the view or another
issue.
Thanks for your time and look forward to hearing from you soon.
Regards
Manish
h for this problem?
Thanks
Manish
23 matches
Mail list logo