nning. They will
accept this I'm sure. Since I restart snmpd with the full config after
/sbin/init is loaded, In the end I still manage to satisfy both pr and
dskTable requirements.
And may the source be with me, as I go through it in order to learn
further... Once more, many thanks!
Best re
Hi Dave,
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >
> Behalf Of Dave Shield
> Sent: Wednesday, July 26, 2006 5:12 PM
> To: vic
> Cc: net-snmp-users@lists.sourceforge.net
> Subject: Re: Issue when enabling SNMPD (w/ pr & dskTab
his issue since I'm trying to launch all stuff as early as
possible. I can do this at the normal rc.X stage (at /sbin/init call). I'm
being impatient however. Doing all stuff prior to /sbin/init. Alas! It's too
late to turn ba
Anyways, I anyone has any idea. I'm all ears.
Checking further and best regards,
Vic
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
will be very difficult for me to explain why other
network-based services gets launched without issues. Anyways, I will try to
check some more.
Regards,
Vic
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceF
conditions. Thus, I
have to make snmpd available at this early level. Rest assured that
networking is already available once I call upon snmpd. But for some reason,
snmpd won't run until bootup executes (busybox') /bin/init.
Ideas/comments are very welcome.
Best regards,
Vic
-Origin
Hi Dave,
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dave Shield
Sent: Thursday, July 20, 2006 8:44 PM
To: vic
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: enabling OIDs .1.3.6.1.4.1.2021.2 and .1.3.6.1.4.1.2021.9 (Dave
Shield)
> I gues
Hi Dave, everyone,
-Original Message-
Message: 2
Date: Thu, 20 Jul 2006 00:22:51 +0100
From: "Dave Shield" <[EMAIL PROTECTED]>
Subject: Re: enabling OIDs .1.3.6.1.4.1.2021.2 and .1.3.6.1.4.1.2021.9
To: vic <[EMAIL PROTECTED]>
Cc: net-snmp-users@lists.sour
ng, mounts, and all running software
(HOST-RESOURCES-MIB::hr**) gets listed properly (see snmpwalk listing
below).
What could be the needed ingredient to enable displaying of prTable and
dskTable?
TIA and Best regards,
Vic
---
HOST-RESOURCES-MIB::hrDiskStorageAccess.1538
others) are not
supported? How do I enable support for these other items as well?
TIA and best regards,
Vic
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get
check/do in order to "get/retrieve" HOST-RESOURCES-MIB
items
Each time I do an `snmpwalk...`?
I can post my lengthy snmpwalk results if anyone wishes to see it.
Best regards,
Vic
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database:
il 19, 2005 4:26 PM
Subject: Re: SNMP v3 Testing errors with authPriv mode
> Yeo Siow Vic wrote:
> > Do i have to compile and build a openssl binary, to test SNMPv3 authPriv
> > mode?
>
> Yes, you need OpenSSL, but there are binary packages for most platforms.
> See http://w
openssl, and i think i
> don't have openssl installed.
>
> SnmpV3 works on authNoPriv and noAuthNoPriv mode, so i guess authPriv mode
> is not working because i don't have openssl installed. Is that right?
>
> victor
>
> - Original Message -
> From: &q
t?
victor
- Original Message -
From: "Dave Shield" <[EMAIL PROTECTED]>
To: "Yeo Siow Vic" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, April 18, 2005 6:10 PM
Subject: Re: SNMP v3 Testing errors with authPriv mode
> On Fri, 2005-04-15 at 11:21, Yeo Siow Vic wrote
dear all,
I am testing SNMPv3, and having problem with authPriv mode.
The setting of SNMPv3 in agent is:
1) In /var/net-snmp/snmpd.conf, i add in:
createUser dave MD5 "Open the door" DES "Open the door"
2) In /usr/local/share/snmp/snmpd.conf, i add in:
rouser dave
The setting of snmpget is:
3)
Hi Robert, everyone,
>> From: Robert Story (Users) <[EMAIL PROTECTED]>
>> Re: UPDATE: Possible bug: NET-SNMP v5.1.2.pre2 crashes
>> 2004-06-29 19:48
>> On Tue, 29 Jun 2004 17:16:33 +0800 Vic wrote:
>> VB> The command that sent net-snmp crashing is
ad PDU type received: 0x42
Bad PDU type received: 0x42
Bad PDU type received: 0x42
Bad PDU type received: 0x42
newCacheRTEnewCacheRTEreserve2 failed
-
Best Regards,
Vic
---
Outgoing mail is certified Virus Free.
Checked by AV
Hi,
The command that sent net-snmp crashing is an attempt to write value to the
"ipRouteIfIndex.xxx.xxx.xxx.xxx" quad-network object. Should net-snmp be
able
to safely reject/process such a request?
Best regards,
Vic
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-vi
ure --help` does not list any info
on how to enable this group. What's NET-SNMP's status on EGP?
Thanks and best regards,
Vic
-
Details for Test 2.1.3.2
SNMPv2c Tests for All MIBs
2.1.3.2 The purpose of th
Hi Dave, Alex, everyone,
> -Original Message-
> From: Dave Shield [mailto:[EMAIL PROTECTED]
> Sent: Monday, June 21, 2004 7:00 PM
> To: Vic Berdin
> Cc: [EMAIL PROTECTED]
> Subject: Re: MAC address not retrieved by Win32 client
>> Here are more details:
>>
Hi David, everyone,
> -Original Message-
> From: Dave Shield [mailto:[EMAIL PROTECTED]
> Sent: Monday, June 21, 2004 4:52 PM
> To: Vic Berdin
> Cc: [EMAIL PROTECTED]
> Subject: Re: MAC address not retrieved by Win32 client
>
>> However, I noticed that MAC (p
-snmp (if it's net-snmp's fault)
2. ...or point to me to a more complete/stable (yet FREE)
Win32 snmp test suit that can prove that net-snmp can
provide MAC address queries.
TIA and Best regards,
Vic
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus syst
Hi Mr. Niels!!!
Thank goodness someone noticed my post. I'm really stumped.
> -Original Message-
> From: Niels Baggesen [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 28, 2004 4:48 PM
> To: Vic Berdin
> Cc: [EMAIL PROTECTED]
> Subject: Re: Help on understanding/fix
t seems
that my parameter settings were retrieved by the test suit, but what could
possibly be the failure on a "received error-index 0" mean?
TIA - Vic
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.672 / Virus Database:
24 matches
Mail list logo
