Greetings!
I wonder is there a way to know blocksize of CD-ROM? I have a number of
old machines required to use 512-byte SCSI CD-ROM and I want to ensure
512-byte mode is enabled or supported.
I tried atactl and it shows wrong block size, always reporting 512,
even on certainly 2k CD-ROM.
--
Hi,
while upgrading my ol' sparcstation with pkg_rolling-replace I hit this
issue:
[95/159] Generating pango/PangoCairo-1.0.gir with a custom command
(wrapped by meson to set env)
FAILED: pango/PangoCairo-1.0.gir
env
PKG_CONFIG_PATH=/home/pkg-workdir/devel/pango/work/pango-1.52.1/output/meson-uni
On Mon, 8 Jul 2024 15:34:53 +0300
Dima Veselov wrote:
> Greetings!
>
> I wonder is there a way to know blocksize of CD-ROM? I have a number of
> old machines required to use 512-byte SCSI CD-ROM and I want to ensure
> 512-byte mode is enabled or supported.
>
> I tried atactl and it shows wrong
Is there a way to upgrade NetBSD 6.1.4 to NetBSD 10.0 without breaking
custom installed software?
Thanks,
Ben
Hello Brad,
El 7/7/24 a las 20:40, Brad Spencer escribió:
...
>...
All of the above is probably fine, assuming that the i2c bus is found.
I am not familiar with using that particular dtparam line... and don't
have a RPI0W. I have never needed anything to enable i2c on the RPI.
You will have t
Is there any way to install NetBSD on a Buffalo WHR-HP-G54 (brcm) router?
Thanks
Ben
Hello Michael,
El 7/7/24 a las 22:10, Michael van Elst escribió:
ea1...@gmail.com (Ramiro Aceves) writes:
I have connected a BMP280 pressure sensor to my piZeroW just to learn a li=
ttle of i2c programming on NetBSD=2E Before doing real programming I issued=
a i2scan command to ensure the syst
ea1...@gmail.com (Ramiro Aceves) writes:
>I see that i2c works even if not configured on /boot/config.txt
>commenting the dtparam=i2c_arm=on:
Yes, that dtparam doesn't exist in our DTB file.
Our DTB file makes all 3 I2C devices available, like:
i2c@7e205000 {
status = "okay";
}
i2c@7e80400
