co...@sdf.org wrote:
> ... as a really horrible and otherwise transparent hack, you could probably
> detach USB before & reattach (drvctl -r) after.
This did help again, thank you!
Now suspend works. But it boots when I press the power button in suspended
state (pressing a keyboard key did not
On Tue, Nov 29, 2016 at 04:10:49PM +0100, Carsten Kunze wrote:
> acpi0: entering state S3
> Flushing disk caches: 8 done
> sd0(umass0:0:0:0): generic HBA error
> sd0: cache synchronization failed
> fatal page fault in supervisor mode
> trap type 6 code 10 rip 0 cs 8 rflags 10282 cr2 0 ilevel 5 rsp
co...@sdf.org wrote:
> I believe it's also possible to try with "drvctl -d hdaudio0", but unsure.
This works, thank you!
But now the system reboots on suspend :)
(dmesg is below.)
> I'd guess some of your issues (whether they are this one or not) are from
> radeon not attaching properly and hdau
Hi carsten,
In boot menu, you can select prompt and type:
userconf disable hdaudio
boot
To try without hdaudio.
I believe it's also possible to try with "drvctl -d hdaudio0", but unsure.
I'd guess some of your issues (whether they are this one or not) are from
radeon not attaching properly
Hello,
sysctl -w hw.acpi.sleep.state=3
failes with
acpi0: entering state S3
Devices without power management support: hdaudio0
acpi0: aborting suspend
Above in dmesg is found:
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: timeout leav